THS3061DGN vs THS3061DGNR Karşılaştırma
Ayrıntılı yan yana karşılaştırma THS3061DGN tarafından Texas Instruments ve THS3061DGNR tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
THS3061DGN - 300MHz CFA, 7000V/us Slew Rate | Texas Instruments
THS3061DGN ✓ AktifTexas Instruments
THS3061DGNR - 300MHz 7000V/us CFB Amplifier | Texas Instruments
THS3061DGNR ✓ AktifÖzellik Karşılaştırması
| Parametre | THS3061DGN | THS3061DGNR |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | Current Feedback Amplifier (CFA) | Current Feedback (CFB) |
| Number of Channels | 1 | 1 |
| Unity Gain Bandwidth | 300 MHz | 300 MHz |
| 0.1 dB Bandwidth | 120 MHz (G=2) | 120 MHz (G = 2) |
| Slew Rate | 7000 V/us | 7000 V/us |
| Harmonic Distortion | -81 dBc at 10 MHz | — |
| Output Current | +/-145 mA into 50 ohms | +/-145 mA into 50 ohm |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | +/-15 V (30 V total) |
| İşletim Sıcaklığı | -40C to +85C | — |
| Paket | 8-Pin HVSSOP (DGN) with PowerPAD | HVSSOP-8 (DGN) with PowerPAD, 8 pins |
| Montaj Türü | Surface Mount | Surface Mount |
| Process Technology | TI BICOM-1 complementary bipolar | TI BICOM-1 |
| Input Voltage Noise | [DATA_NEEDED: input voltage noise] | [DATA_NEEDED: input voltage noise] |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Durağan Akım | [DATA_NEEDED: quiescent current] | [DATA_NEEDED: quiescent current] |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Thermal Pad | PowerPAD (exposed pad on package bottom) | — |
| 2nd Harmonic Distortion | — | -81 dBc at 10 MHz |
| İşletim Sıcaklığı Aralığı | — | -40C to +85C |
| Packaging | — | Tape & Reel (R suffix) |
| Kategori | — | Linear - Amplifiers - Instrumentation, Op Amps, Buffer Amps |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |