THVD1400DR vs MAX3078EESA+ Karşılaştırma

Ayrıntılı yan yana karşılaştırma THVD1400DR tarafından Texas Instruments ve MAX3078EESA+ tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Analog Devices
MAX3078EESA+ MAX3078EESA+ - 3.3V RS-485/RS-422 ESD Transceiver

MAX3078EESA+ - 3.3V RS-485/RS-422 ESD Transceiver

MAX3078EESA+ ✓ Aktif

Özellik Karşılaştırması

Parametre THVD1400DR MAX3078EESA+
Marka Texas Instruments Analog Devices
Kategori Interface ICs Interface ICs
Yaşam Döngüsü Durumu Aktif Aktif
Fonksiyon Transceiver —
Protocol RS-422, RS-485 —
Number of Drivers/Receivers 1/1 —
Duplex Half —
Supply Voltage (VCC) 3.0 V to 5.5 V —
Veri Hızı 500 kbps (max) —
Receiver Hysteresis 50 mV (typ) —
Bus Common-Mode Voltage -7 V to +12 V —
ESD Protection (Bus Pins, HBM) ±16 kV —
ESD Protection (Bus Pins, IEC 61000-4-2 Contact) ±12 kV —
Unit Load 1/8 (256 nodes max) —
İşletim Sıcaklığı -40 °C to +125 °C [DATA_NEEDED: operating temperature range]
Paket 8-pin SOIC (SOIC-8, D suffix) 8-pin SOIC
Montaj Türü Surface Mount Surface mount
RoHS Durumu Compliant [DATA_NEEDED: RoHS compliance status]
Lead-Free Yes —
Receiver Fail-Safe Yes (open, short, idle bus) —
Hot-Plug Support Yes —
Kapatma Akımı [DATA_NEEDED: shutdown current value] —
Quiescent Current (typ) [DATA_NEEDED: quiescent current value] —
Product Type — RS-485/RS-422 transceiver
Supply Voltage Range — 2.97V to 3.63V
Driver Count — 1
Receiver Count — 1
Interface Standards — RS-485 and RS-422
ESD Protection — ±15kV
Fail-Safe Receiver — Logic-high output when receiver inputs are open or shorted
Hot-Swap Capability — Supported
Unloaded Supply Current — 800µA
Supply Current With Drivers Disabled — 800µA when fully loaded
DigiKey Listing Package — 8-SOIC
Manufacturer Product Status — PRODUCTION
Manufacturer Data Sheet Revision — Rev. 5
Common-Mode Rejection — [DATA_NEEDED: common-mode rejection ratio]
Differential Input Threshold — [DATA_NEEDED: differential input threshold]
Driver Output Current — [DATA_NEEDED: driver output current]
REACH Status — [DATA_NEEDED: REACH compliance status]

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin