TJA1048 vs TJA1048T Karşılaştırma
Ayrıntılı yan yana karşılaştırma TJA1048 tarafından NXP Semiconductors ve TJA1048T tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
NXP Semiconductors
TJA1048T - Dual 1Mbit/s CAN Transceiver with Standby | NXP
TJA1048T ✗ Son Kullanım ZamanıÖzellik Karşılaştırması
| Parametre | TJA1048 | TJA1048T |
|---|---|---|
| Marka | NXP Semiconductors | NXP Semiconductors |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Hayat Dönemi Sonu |
| Product Type | Dual High-Speed CAN Transceiver | Dual high-speed CAN transceiver |
| Number of Channels | 2 (dual independent transceivers) | — |
| Veri Hızı | [DATA_NEEDED: max data rate in Mbps] | — |
| CAN Standard | ISO 11898-2:2016 (High-Speed CAN physical layer) | — |
| Supply Voltage (VCC) | [DATA_NEEDED: VCC min/max value] | — |
| Supply Voltage (VIO) | [DATA_NEEDED: VIO range] | — |
| Bus Fault Protection | Short to battery, short to GND, thermal shutdown | — |
| ESD Protection (HBM, bus pins) | [DATA_NEEDED: HBM ESD rating kV] | — |
| İşletim Sıcaklığı | -40 C to +125 C (automotive grade) | — |
| Paket | SOIC-14 (14-SO) | 14-pin SO (14-SO) |
| Montaj Türü | Surface Mount | Surface mount |
| Low-Power Mode | Standby mode with remote wake-up | — |
| Automotive Qualification | AEC-Q100 qualified | — |
| RoHS Durumu | Compliant | unknown |
| MSL Seviyesi | [DATA_NEEDED: MSL rating] | — |
| TXD Dominant Timeout | Yes (prevents bus lockup) | — |
| Number of CAN Channels | — | 2 channels |
| Maximum CAN Data Rate | — | 1 Mbit/s |
| CAN Bus Type | — | Physical two-wire CAN bus |
| Signal Interface | — | Differential transmit and receive |
| Operating Mode | — | High-speed mode with Standby mode |
| Primary Application | — | Automotive high-speed CAN systems |
| Pin Sayısı | — | 14 pins |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Transmitter Output Current | — | [DATA_NEEDED: transmitter output current] |
| Receiver Output Current | — | [DATA_NEEDED: receiver output current] |
| Loop Delay | — | [DATA_NEEDED: loop delay] |
| Standby Supply Current | — | [DATA_NEEDED: standby supply current] |
| İşletim Sıcaklığı Aralığı | — | [DATA_NEEDED: operating temperature range] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |