TLV2761ID vs TLV2760ID Karşılaştırma
Ayrıntılı yan yana karşılaştırma TLV2761ID tarafından Texas Instruments ve TLV2760ID tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
TLV2760ID - 500kHz RRIO Op Amp with Shutdown | Texas Instruments
TLV2760ID ✓ AktifÖzellik Karşılaştırması
| Parametre | TLV2761ID | TLV2760ID |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | Single voltage-feedback operational amplifier | 1 circuit operational amplifier |
| Number of Circuits | 1 circuit | — |
| Supply Voltage Range | 1.8 V to 3.6 V recommended maximum | — |
| Maximum Recommended Supply Voltage | 3.6 V | 3.6 V |
| Minimum Operating Supply Voltage | 1.8 V | 1.8 V |
| Gain-Bandwidth Product | 500 kHz | 500 kHz |
| Operating Current | 20 µA | — |
| Input Type | Rail-to-rail input | — |
| Çıkış Türü | Rail-to-rail output | — |
| Supply Type | Single supply | — |
| İşletim Sıcaklığı Aralığı | -40°C to +85°C | -40°C to +85°C |
| Paket | 8-pin SOIC (D) | 8-pin SOIC |
| Montaj Türü | Surface mount | Surface mount |
| Product Classification | Standard general-purpose amplifier | — |
| Battery Compatibility | Operation from 1.8 V, suitable for two AA or AAA cells | — |
| Input Overvoltage Operation | Operation from ±1.8 V supplies down to ±0.9 V | — |
| Family Description | 1.8 V micropower rail-to-rail input/output operational amplifier | — |
| RoHS Durumu | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | [DATA_NEEDED: AEC-Q100 qualification] |
| Typical Supply Current | — | 20 µA |
| Input Offset Voltage | — | 3500 µV typical |
| Input Common-Mode Range | — | Rail-to-rail |
| Output Swing | — | Rail-to-rail |
| Shutdown Function | — | 1 shutdown control function |
| Supply Voltage Characterization | — | Single supply operation |
| Noise Type | — | [DATA_NEEDED: input voltage noise density] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Output Current | — | [DATA_NEEDED: output current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |