TPS7A6633QDGNRQ1 vs TPS7A6650QDGNRQ1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma TPS7A6633QDGNRQ1 tarafından Texas Instruments ve TPS7A6650QDGNRQ1 tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
TPS7A6633QDGNRQ1 - 150mA 40V Off-Battery LDO | Texas Instruments
TPS7A6633QDGNRQ1 ✓ AktifÖzellik Karşılaştırması
| Parametre | TPS7A6633QDGNRQ1 | TPS7A6650QDGNRQ1 |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Voltage Regulators | Voltage Regulators |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Çıkış Türü | Fixed | — |
| Çıkış Gerilimi | 3.3 V | — |
| Maksimum Çıkış Akımı | 150 mA | — |
| Giriş电压范围 | 4 V to 40 V | 4 V to 40 V |
| Transient Input Tolerance | 45 V (load-dump) | — |
| Düşüş电压 | 200 mV typical at 100 mA | [DATA_NEEDED: dropout voltage @150 mA] |
| Quiescent Current (no load) | 12 uA typical | — |
| Quiescent Current (enabled, full load) | [DATA_NEEDED: I_q full-load] | — |
| Güç İyi Çıkışı | Open-drain, active-low | — |
| Output Accuracy | [DATA_NEEDED: %] | — |
| Line Regulation | [DATA_NEEDED] | — |
| Load Regulation | [DATA_NEEDED] | — |
| İşletim Sıcaklığı | -40C to +125C | — |
| Paket | 8-pin HVSSOP (DGN) with PowerPAD | 8-pin HVSSOP (PowerPAD MSOP, DGN) |
| Montaj Türü | Surface Mount | Surface Mount |
| MSL Seviyesi | 2 | Level 3 |
| RoHS Durumu | Compliant | Compliant |
| Lead-Free | Yes | — |
| Automotive Qualification | AEC-Q100 Grade-1 | — |
| Regulator Type | — | LDO (Low-Dropout), Fixed Positive |
| Output Voltage (Nominal) | — | 5.0 V |
| Output Current (Maximum) | — | 150 mA |
| Input Voltage (Transient Survival) | — | 45 V (load-dump rated) |
| Quiescent Current (No Load) | — | 12 µA (typ) |
| Güç İyi Çıkışı | — | Yes (open-drain, programmable delay) |
| Output Tolerance | — | [DATA_NEEDED: % initial accuracy] |
| İşletim Jant Sıcaklığı | — | -40 °C to +125 °C |
| Protection Features | — | Short-circuit, overcurrent, thermal shutdown |
| Thermal Pad | — | Yes (exposed pad, must be soldered to PCB) |
| AEC-Q100 Qualification | — | Yes (Grade 1) |