Microchip Technology

A3P125-FG144 - 125K Gate ProASIC3 FPGA | Microchip Technology

MPN: A3P125-FG144 ✓ Aktif
1.5 V Vdss 144-pin LBGA Package 231 MHz Speed Nonvolatile Flash Memory
MOQ: 1 |

A3P125-FG144 Genel Bakış

Microchip Technology A3P125-FG144 is a ProASIC3 field-programmable gate array with 125,000 equivalent gates, 3,072 logic cells, 97 I/O, and a 231 MHz maximum operating frequency. The device uses 130 nm CMOS technology, supports a 1.5 V core voltage for 1.5 V-only systems, and is offered in a 144-pin plastic ball grid array package. It is identified as an automotive ProASIC3 Flash FPGA, making it suitable for embedded control, automotive electronics, industrial automation, and compact programmable-logic systems.

A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured by the end user rather than permanently defined during wafer fabrication. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, programmable interconnect, embedded memory, and I/O resources. ProASIC3 devices use nonvolatile Flash configuration memory, allowing the programmed logic to remain in the device without continuous external reconfiguration.

The A3P125-FG144 provides 36,864 configurable logic elements according to its distributor product listing, 97 I/O, and operation up to 231 MHz. Its 1.5 V core-voltage support is useful for systems designed around 1.5 V-only power rails. The low-impedance Flash switch structure and single-chip implementation make the device appropriate where deterministic control logic, compact board area, and field reconfiguration are priorities.

The ProASIC3 architecture is intended for low-density and ultra-low-density designs. Its logic resources can implement control functions, state machines, communication interfaces, signal conditioning, and peripheral integration. Embedded block RAM supports buffering and local data storage, while the 97 available I/O reduce the need for external interface devices when the system architecture permits direct connection to external converters, sensors, memories, and communications transceivers.

Typical applications include automotive body and chassis control, industrial sensor acquisition, motor-control interfaces, industrial networking, test equipment, and embedded instrumentation. In these systems, the device can consolidate control logic that otherwise requires multiple programmable or discrete components. Reprogrammability also supports configuration variants, post-deployment updates, and design reuse across related product models.

A critical design consideration is the 144-pin ball-grid-array footprint and its 1.00 mm ball pitch. The PCB must follow the manufacturer's package drawing, including ball assignments, power requirements, decoupling, and exposed thermal behavior. Do not treat a similarly named ProASIC3 device in another package as a drop-in replacement; verify the exact pinout, voltage requirements, configuration interface, and timing behavior before substitution.

This product page combines the manufacturer family information, device-specific distributor specifications, packaging details, application guidance, and same-footprint alternative analysis to support engineering selection. It emphasizes the distinctions that determine whether a candidate can actually replace the A3P125-FG144 without PCB, firmware, or timing changes.

Drop-in alternatifler için A3P125-FG144 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

A3P125-FG144T

✅ Yerleştirme
📦 144-LBGA
Same A3P125 ProASIC3 device and 144-LBGA footprint; the T ordering suffix changes the identified automotive temperature or qualification variant, with timing and operating limits requiring confirmation.

📋 Katalogda Olmayan Referans Alternatifi

A3P125-FGG144

✅ Yerleştirme
📦 144-LBGA
Same A3P125 family and 144-pin package configuration; the additional G ordering character changes the ordering code, so temperature, qualification, and packing details must be matched explicitly.

📋 Katalogda Olmayan Referans Alternatifi

A3P125-1FG144

✅ Yerleştirme
📦 144-LBGA
Same A3P125 device, 36 Kbit block RAM, and 144-FPBGA land pattern; speed grade 1 and the stated 0 °C to 85 °C commercial junction range differ from the automotive A3P125-FG144 designation.

📋 Katalogda Olmayan Referans Alternatifi

A3P125-FG144C

✅ Yerleştirme
📦 144-PBGA
Same A3P125 125K-gate device with 3,072 logic cells and 97 I/O in a 144-ball package; the C suffix changes ordering conditions, so qualification and temperature limits require verification.

📋 Katalogda Olmayan Referans Alternatifi

AGL125V5-FGG144

✅ Yerleştirme
📦 144-FBGA
Same 97 I/O and 144-FBGA package format, but it is a different FPGA family; internal logic, memory, timing, configuration, and software compatibility require redesign or migration checks.

📋 Katalogda Olmayan Referans Alternatifi

A3P125-FG144 Maksimum Değerlendirmeler & Elektriksel Özellikler

Device Type ProASIC3 Flash FPGA
Equivalent Gates 125,000 gates
Logic Cells 3,072 cells
Configurable Logic Elements 36,864 elements
Maximum Operating Frequency 231 MHz
Process Technology 130 nm CMOS
Core Voltage 1.5 V
I/O Count 97 I/O
Embedded Block RAM 36 Kbit
Paket 144-pin LBGA
Package Ball Pitch 1.00 mm
Configuration Memory Nonvolatile Flash
Automotive Qualification Automotive ProASIC3 Flash family
Device Architecture Low-density single-chip FPGA
Logic Resource Type Programmable logic block and interconnect architecture
Programmability User-programmable field-programmable gate array
Montaj Türü Surface mount

A3P125-FG144 1.00 mm Pin Yapısı Kılavuzu

A3P125-FG144 (1.00 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

1.00 mm paket pin çizelgesi için A3P125-FG144

Ayrıntılı pin çıkış verisi mevcut değil: A3P125-FG144.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

A3P125-FG144 için uygundur 6 uygulamas: Automotive Body Control Logic, Industrial Sensor Acquisition, Motor Control Interface, Programmable Test and Measurement, Embedded Communication Controller, Security and Access Control.

🚗

Automotive Body Control Logic

The A3P125-FG144 fits centralized body-control logic that must combine switch-state evaluation, timers, diagnostic sequences, and communication handling. Its 3,072 logic cells, 97 I/O, 36 Kbit of embedded block RAM, and 231 MHz maximum operating frequency provide enough resources for compact automotive control modules while preserving a small 144-LBGA footprint. Nonvolatile Flash configuration allows the control image to remain stored in the FPGA. For a production program, engineers should verify the exact automotive grade, temperature limits, PPAP documentation, and qualification status against the selected ordering code before release.

🏭

Industrial Sensor Acquisition

The A3P125-FG144 is suitable for industrial acquisition modules that must multiplex sensor inputs, perform thresholding and filtering, and transfer results to a communications processor. Its 97 I/O provide substantial parallel connectivity for digital sensors, encoders, discrete lines, and control signals, while 36 Kbit of embedded block RAM can buffer locally captured samples. The 231 MHz maximum frequency supports time-efficient parallel data handling, and the 130 nm CMOS implementation is appropriate for compact control electronics. Designers should use the manufacturer I/O standards and timing constraints to confirm compatibility with each sensor interface.

⚡

Motor Control Interface

The A3P125-FG144 can implement the digital control layer for industrial motor systems, including command decoding, PWM coordination, fault capture, and protection sequencing. Its 3,072 logic cells allow multiple finite-state machines and timing channels to coexist, while the 97 I/O support encoder inputs, gate-driver commands, fault signals, and communications links. Embedded block RAM can retain diagnostic events or reference tables. The FPGA does not replace analog current sensing or power-stage isolation, but it can coordinate those subsystems deterministically under the datasheet timing and I/O specifications.

🔧

Programmable Test and Measurement

The A3P125-FG144 is useful in compact test equipment that requires programmable sequencing, pattern generation, and acquisition control. The 97 I/O can connect to digital fixtures, triggers, status indicators, and control processors, while 36 Kbit of block RAM supports captured vectors or rolling data. A maximum operating frequency of 231 MHz provides a useful logic-processing ceiling for parallel operations, although actual instrument performance depends on routing and timing closure. Flash-based configuration simplifies standalone operation by retaining the instrument firmware in the device between power cycles.

🌐

Embedded Communication Controller

The A3P125-FG144 can serve as a dedicated protocol controller when a system requires deterministic handling of low- and medium-speed serial links alongside general-purpose control logic. Its 3,072 logic cells support transmit and receive state machines, framing logic, checksums, FIFOs, and supervisory functions, while 97 I/O provide room for parallel data paths and status signaling. The 36 Kbit embedded block RAM can implement packet buffering or command queues. Engineers must confirm the required I/O standards and timing margin in the manufacturer documentation rather than infer compatibility from the I/O count alone.

🔒

Security and Access Control

The A3P125-FG144 is applicable to compact access-control and security equipment requiring persistent logic configuration, event sequencing, and multiple discrete interfaces. Its Flash configuration stores the control program in the device, while the 3,072 logic cells can implement credential-state machines, alarm policies, timing sequences, and communication protocols. The 97 I/O support readers, indicators, relays, and network or host-controller links, and the 36 Kbit block RAM can buffer event records. For safety-related deployments, developers should add independent monitoring and verify the product's automotive or industrial qualification requirements.

Önerilen Ürünler Özeti

A3P125-FG144T Same A3P125 automotive family and package family Kullanıldığı Yer: Automotive Body Control Logic, Motor Control Interface, Embedded Communication Controller A3P125-FGG144 Same A3P125 device family with alternate ordering suffix Kullanıldığı Yer: Automotive Body Control Logic, Embedded Communication Controller A3P125-FG144C Same A3P125 logic resource configuration in a 144-ball package Kullanıldığı Yer: Industrial Sensor Acquisition, Programmable Test and Measurement, Security and Access Control A3P125-1FG144 Commercial speed-grade A3P125 configuration Kullanıldığı Yer: Industrial Sensor Acquisition, Programmable Test and Measurement AGL125V5-FGG144 Same-package cross-family candidate for migration evaluation Kullanıldığı Yer: Motor Control Interface, Security and Access Control
What are the key specifications of A3P125-FG144 that engineers should know?
The A3P125-FG144 is a 125,000-equivalent-gate ProASIC3 Flash FPGA with 3,072 logic cells, 97 I/O, a 1.5 V core, and a maximum operating frequency of 231 MHz. Microchip describes the ProASIC3 family as a low-density, single-chip FPGA with reprogrammability and small-footprint packaging. The device uses 130 nm CMOS technology and is offered in a 144-pin plastic BGA package, making it appropriate for compact embedded-control and automotive logic designs.
Where can I download the A3P125-FG144 datasheet PDF?
The manufacturer datasheet and family information are available through Microchip Technology's A3P125 product page at https://www.microchip.com/en-us/product/A3P125. The device is also identified as an automotive ProASIC3 Flash family member with 1.5 V core-voltage support and low-impedance Flash switches. Use the package pin table and ordering information in the manufacturer documentation before assigning PCB balls or selecting replacement parts.
Where can I find the A3P125-FG144 pinout and package drawing?
Use the A3P125-FG144 pin-description table and package drawing in the Microchip Technology automotive ProASIC3 Flash FPGA datasheet. The device uses a 144-pin plastic BGA package with 97 I/O and a 1.00 mm ball pitch. Because the complete ball-by-ball pin list is not reproduced on this page, PCB routing must follow the manufacturer pin table and the exact A3P125-FG144 package drawing.
What is A3P125-FG144 used for?
The A3P125-FG144 is used for compact programmable control logic, state machines, signal processing, and peripheral integration. Its 3,072 logic cells, 97 I/O, 36 Kbit of embedded block RAM, and 231 MHz maximum frequency suit automotive body-control modules, industrial sensor interfaces, motor-control logic, test equipment, and embedded instrumentation. Nonvolatile Flash configuration also allows the programmed design to remain operational without repeated external configuration.
Is A3P125-FG144 suitable for automotive applications?
Yes, the A3P125-FG144 is identified as an automotive ProASIC3 Flash family device. The family listing references automotive grade options and operation tied to junction-temperature grades up to 135 °C. Final design approval should still be based on the exact ordering code, its grade suffix, the manufacturer datasheet, PPAP documentation, and the qualification requirements applicable to the production program.
What is the difference between A3P125-FG144 and A3P125-1FG144?
Both parts use the A3P125 ProASIC3 device in the FG144 package and provide 36 Kbit of block RAM, but their ordering suffixes identify different device variants. The A3P125-1FG144 is described as speed grade 1 for commercial junction-temperature operation from 0 °C to 85 °C. The A3P125-FG144 carries automotive family identification. Verify timing grade, temperature grade, qualification, and all ordering details before using one as the replacement for the other.
What can replace A3P125-FG144 on the same PCB?
The strongest same-footprint candidates are the A3P125 family variants that retain the 144-pin FBGA land pattern, including A3P125-FG144T, A3P125-FGG144, A3P125-1FG144, and A3P125-FG144C. AGL125V5-FGG144 is a cross-family option listed with the same 97 I/O and 144-pin FBGA configuration. None should be treated as an automatic substitute: confirm pinout, voltage, timing, Flash configuration interface, automotive qualification, and software support.
Is AGL125V5-FGG144 a drop-in replacement for A3P125-FG144?
AGL125V5-FGG144 is the closest cross-family candidate identified with 97 I/O in a 144-pin FBGA package, but it is not automatically a drop-in replacement for A3P125-FG144. The devices belong to different FPGA families, so configuration methods, logic resources, I/O behavior, timing, memory architecture, and software support must be compared. A PCB-compatible footprint is only the first requirement for a production substitution.
When should I choose A3P125-FG144 instead of A3P125-1FG144?
Choose A3P125-FG144 when the design calls for the automotive ProASIC3 Flash family variant and the product program requires the qualification level associated with that ordering code. Consider A3P125-1FG144 for a commercial speed-grade-1 design with a stated junction-temperature range of 0 °C to 85 °C. The final choice should follow the exact temperature, qualification, timing, and sourcing requirements of the application.
Where can I buy A3P125-FG144 online?
Use the Request a Quote form on this page to request the A3P125-FG144, current lead time, minimum order quantity, and delivery options. The manufacturer family page and the product listings linked from this page are useful starting points for documentation and exact-ordering-code verification. The quote request keeps commercial details tied to the exact 144-pin automotive ProASIC3 configuration.
What is the price of A3P125-FG144?
Current pricing for A3P125-FG144 should be requested through the Request a Quote form on this page. The quote should identify the exact MPN, package suffix, temperature or qualification grade, and required quantity so that the commercial response does not drift to another A3P125 ordering code. Stock, lead time, and delivery terms should be confirmed through the same request.
What is the lead time and stock status for A3P125-FG144?
Request current stock, minimum order quantity, lead time, and delivery options through the Request a Quote form on this page. Stock availability for legacy programmable-logic devices can vary with allocation status and exact ordering suffix, so confirm A3P125-FG144 rather than a generic A3P125 device. Include the required date, production quantity, and traceability requirements in the request.
How much power does the A3P125-FG144 consume?
The exact operating and static power consumption must be obtained from the A3P125 datasheet using the selected system frequency, I/O loading, core voltage, and temperature. The device supports a 1.5 V core and contains 3,072 logic cells, 97 I/O, and 36 Kbit of block RAM, all of which influence actual consumption. Estimate board-level demand from the manufacturer power table rather than extrapolating from logic-cell count alone.
Does the A3P125-FG144 support a 1.5 V-only system?
Yes. The automotive ProASIC3 Flash family documentation for the A3P125-FG144 explicitly identifies 1.5 V core-voltage support for 1.5 V-only systems. The system designer must still confirm every I/O supply, configuration interface voltage, bank voltage, and external interface requirement from the manufacturer pin table and operating conditions. A 1.5 V core does not automatically establish that every I/O can operate at 1.5 V.
What tools and design support are available for A3P125-FG144?
Use the Microchip ProASIC3 design flow and the programming tools associated with the selected device family and package. Engineering support should cover synthesis, timing constraints, pin assignment, Flash programming, and configuration handling. Before committing a PCB, create the target device in the toolchain and verify that the A3P125-FG144 ordering code, 144-pin package, I/O standards, memory resources, and timing constraints are supported.
How does A3P125-FG144 compare with AGL125V5-FGG144 for signal processing?
Both devices are listed with 97 I/O and a 144-pin FBGA configuration, but equal package and I/O counts do not establish equal signal-processing performance. The A3P125-FG144 is a 125K-gate ProASIC3 Flash FPGA with 3,072 logic cells, while the AGL125V5-FGG144 belongs to a different family. Compare DSP resources, internal RAM, maximum clocks, I/O standards, register and routing performance, and toolchain maturity before selecting the cross-family candidate.

Mühendislik referans verileri: A3P125-FG144 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the A3P125-FG144 for an automotive-oriented programmable-logic design that requires 125,000 equivalent gates, 3,072 logic cells, 97 I/O, a 1.5 V core, and a 144-pin BGA footprint. Use A3P125-FG144T when its documented automotive temperature and qualification ordering conditions better match the program, and use A3P125-FGG144 when its exact suffix defines the required grade or packing configuration. A3P125-1FG144 is appropriate when commercial speed grade 1 and its stated 0 °C to 85 °C junction range are acceptable. A3P125-FG144C is another same-family package candidate, but its ordering conditions must be verified. Consider AGL125V5-FGG144 only when a cross-family migration is acceptable and the 97-I/O, 144-FBGA format is insufficient by itself; the design must also be revalidated for architecture, timing, memory, configuration, and software compatibility.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün A3P125-FG144T A3P125-FGG144 A3P125-1FG144 A3P125-FG144C AGL125V5-FGG144
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 144-LBGA 144-LBGA 144-pin package 144-FPBGA 144-PBGA 144-FBGA
FPGA Family ProASIC3 ProASIC3 ProASIC3 ProASIC3 ProASIC3 AGL125V5
I/O Count 97 I/O 97 I/O 97 I/O 97 I/O 97 I/O 97 I/O

Ana Farklılayıcılar

  • Maintains the ProASIC3 architecture while offering exact-package ordering alternatives (karşılaştırma:A3P125-FG144T)
  • Provides a commercial speed-grade option with the same 36 Kbit block-RAM configuration (karşılaştırma:A3P125-1FG144)
  • Preserves 97 I/O in a 144-ball footprint for interface-rich embedded systems (karşılaştırma:AGL125V5-FGG144)

Tasarım Notları

Assign every BGA ball directly from the manufacturer A3P125-FG144 pin table and package drawing. The device is listed in a 144-LBGA configuration with 97 I/O and a 1.00 mm ball pitch. Preserve the manufacturer-recommended escape-routing geometry and via placement, and verify every power, ground, configuration, clock, and I/O connection against the selected ordering code before fabrication. A similar A3P125 suffix does not guarantee identical ball functions or grade requirements.

Confirm the exact core and I/O supply requirements from the manufacturer datasheet before constructing the power tree. The device supports a 1.5 V core, but the complete system may require additional supply rails and I/O voltage levels. Place the required bypass capacitance at the package power balls, preserve the recommended current-return path, and estimate both static and dynamic demand at the intended operating frequency. Do not infer power consumption from the 3,072 logic cells alone.

Create the target device in the ProASIC3 toolchain and complete timing closure for every clock and data interface. The 231 MHz figure is a maximum operating-frequency reference, not a guaranteed system result; routing congestion, I/O standards, clock quality, and external loading determine achievable performance. Apply the manufacturer's I/O drive, slew, termination, and unused-pin rules, and validate high-speed edges with appropriate test equipment.

Do not substitute a 144-pin device solely because its package has the same ball count. Confirm the ball map, configuration pins, supply pins, I/O standards, Flash-programming interface, timing grade, temperature range, and qualification documents. The AGL125V5-FGG144 is a different FPGA family and may require logic remapping or a complete design migration even if the PCB footprint appears compatible.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The device is identified as an automotive ProASIC3 Flash family FPGA, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements require confirmation from the manufacturer product documentation or declaration.

Veri doğrulanma tarihi: 2026-11-08 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

a3p125 vqg100i a3p125 pqg208i a3p125 tqg144 a3p125 vqg100 a3p125 fgg144 actel a3p125 A3P125-FG144 datasheet A3P125-FG144 datasheet pdf A3P125-FG144 pinout A3P125-FG144 footprint A3P125-FG144 equivalent A3P125-FG144 replacement A3P125-FG144 vs AGL125V5-FGG144 A3P125-FG144 automotive FPGA A3P125-FG144 price

İlgili Bileşenler ve Terimler

Microchip Technology Actel Corporation A3P125-FG144 A3P125-FG144T A3P125-FGG144 A3P125-1FG144 A3P125-FG144C AGL125V5-FGG144 ProASIC3 FPGA field-programmable gate array programmable logic nonvolatile Flash configuration memory logic cell embedded block RAM I/O 1.5 V core voltage 231 MHz 130 nm CMOS 144-LBGA plastic ball grid array surface-mount package automotive electronics industrial automation programmable control logic
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle