AD604ARS - Dual 40 MHz Low-Noise VGA | Analog Devices
MPN: AD604ARS ✓ AktifAD604ARS Genel Bakış
A variable gain amplifier, or VGA, is an amplifier whose gain changes under electronic control. It belongs to the broader signal-conditioning hierarchy of amplifiers, analog ICs, and semiconductor devices. Unlike a fixed-gain operational amplifier, a VGA is designed to preserve signal integrity while gain is varied over time. The AD604's linear-in-dB control characteristic is particularly useful when an application needs smooth, repeatable gain adjustment across a wide input range.
Each channel provides 40 mA of signal output capability and a 170 V/µs slew rate. These figures indicate that the amplifier can process relatively high-rate, low-level signals without becoming the limiting element in the signal path. The dual-channel configuration also allows two independent gain-controlled paths, reducing the need for separate amplifiers when a system processes differential, dual, or paired analog channels.
The AD604 architecture is optimized for low-noise signal amplification with gain determined by an external control voltage. This makes it suitable for receivers in which attenuation must occur before downstream conversion or digitization. Compared with digitally controlled gain systems, the analog VGA can provide continuously variable gain while retaining an analog signal path and avoids adding a digital control interface to the signal-processing chain.
Typical uses include ultrasound receiver channels, medical imaging, industrial inspection, vibration analysis, communications equipment, and other instrumentation requiring controlled attenuation. In an ultrasound system, one channel can be selected according to echo depth or signal strength while the second handles a paired receive path. The 40 MHz bandwidth is particularly relevant to high-frequency analog sections that feed converters or sampling circuits.
PCB implementation requires careful attention to the 24-lead SSOP footprint, high-speed return paths, decoupling, and clean grounding. The gain-control input is sensitive to noise because it determines the attenuation of each amplified channel. Short traces, stable reference-voltage generation, and separation from digital switching paths help preserve gain accuracy and dynamic range. Decoupling capacitors should be positioned close to the supply pins using the manufacturer layout guidance.
This product page combines the AD604ARS electrical characteristics, pin and footprint guidance, commercial ordering information, qualified drop-in alternatives, and practical application notes. It is intended to help engineers evaluate noise, bandwidth, slew rate, control stability, and package compatibility before incorporating the amplifier into an analog instrumentation or medical-imaging design.
Drop-in alternatifler için AD604ARS — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller AD604ARS (aynı form faktörü ve ayağa oturma) — farklı olan Product Type.
AD604ARSZ
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →AD604ARSZ-RL
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
AD604ARS-REEL
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
AD604ARS Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | Dual variable gain amplifier |
| Number of Channels | 2 channels |
| Gain Control Characteristic | Linear in dB |
| Signal Bandwidth | 40 MHz |
| Slew Rate | 170 V/µs |
| Signal Output Current | 40 mA |
| Paket | 24-lead SSOP |
| Primary Application | Ultrasound receive signal chains |
| Montaj Türü | Surface mount |
AD604ARS 24-lead ssop Pin Yapısı Kılavuzu
AD604ARS (24-lead ssop paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: AD604ARS.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
AD604ARS için uygundur 6 uygulamas: Ultrasound Receiver Signal Chain, Medical Imaging Receive Front End, Industrial Ultrasonic Inspection, Dynamic-Signal Instrumentation, Communications Receive Attenuator, Vibration and Acoustic Analysis.
Ultrasound Receiver Signal Chain
The AD604ARS fits an ultrasound receiver because each channel provides independently controlled attenuation with a 40 MHz bandwidth and 170 V/µs slew rate. Place the VGA after the receive preamplifier and before the analog-to-digital converter, then drive its gain-control input with the time-gain-control voltage. This allows echo signals to be attenuated as their amplitude changes with depth. The dual-channel arrangement supports paired receive paths, while the 40 mA output capability provides useful drive into the following stage. Gain range, input-noise density, and signal-swing limits must be confirmed from the AD604 datasheet for the selected transducer, preamplifier, and converter.
Önerilen
Medical Imaging Receive Front End
The AD604ARS supports medical-imaging receivers that require low-noise variable attenuation before conversion. Its two channels can process paired signals, and its linear-in-dB control characteristic supports predictable gain changes across different echo or tissue conditions. The 40 MHz bandwidth accommodates high-rate analog receive nodes, while 170 V/µs slew rate helps the amplifier follow rapid waveform edges. In a complete medical front end, the designer must confirm noise, gain accuracy, common-mode range, supply limits, and isolation requirements. Those checks are essential because analog gain control and patient-signal safety are separate system constraints.
Önerilen
Industrial Ultrasonic Inspection
The AD604ARS is appropriate for ultrasonic flaw-detection and thickness-measurement receivers where reflected echoes vary widely in amplitude. The dual channels can process separate transmit-receive or reflected-signal paths, while variable gain reduces the dynamic-range demand placed on downstream converters. With a 40 MHz bandwidth, the part can operate in the high-frequency analog section of an inspection instrument; its 170 V/µs slew rate supports rapid signal movement. Designers should account for probe-to-probe gain differences, control-voltage settling, and noise referenced to the selected preamplifier before calibrating the instrument.
Önerilen
Dynamic-Signal Instrumentation
The AD604ARS can serve as the variable-gain element in instrumentation that receives signals spanning several orders of magnitude. A control system can increase attenuation for strong events and reduce it for weak events before the signal reaches a high-resolution converter. The dual-channel architecture supports two signal paths without duplicating the VGA, while the 40 MHz bandwidth covers demanding laboratory and industrial waveforms. The 170 V/µs slew rate helps preserve large-signal behavior, but actual settling and gain accuracy depend on the control network. Keep the gain-control trace away from high-current switching paths and verify the complete control-voltage range in the manufacturer datasheet.
Önerilen
Communications Receive Attenuator
The AD604ARS can provide controlled attenuation in a communications receiver when the incoming level changes across a wide range. Placing variable gain before a mixer or converter helps maintain usable signal amplitude and can reduce the dynamic-range burden on later stages. The dual-channel implementation supports paired receiver paths, and the 40 MHz bandwidth is adequate for many intermediate-frequency or baseband signal chains. The 40 mA output current and 170 V/µs slew rate support downstream drive, subject to the load and supply limits specified by Analog Devices. RF-layout practices, controlled grounding, and separation of the analog gain-control line remain necessary in a multi-channel communications assembly.
Önerilen
Vibration and Acoustic Analysis
The AD604ARS fits vibration-monitoring and acoustic-analysis systems in which sensor outputs may vary substantially as operating conditions change. The analog VGA can attenuate strong transient events before they overload an ADC, while its two channels can handle simultaneous measurements. A 40 MHz bandwidth accommodates many sensor and instrumentation signals, and the 170 V/µs slew rate preserves fast transients better than a bandwidth-limited low-speed amplifier. For reliable measurements, establish the required attenuation range and control settling time, then use shielded or guarded gain-control routing to prevent environmental pickup. The complete signal path must also meet the selected ADC's input range and sampling requirements.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: AD604ARS — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | AD604ARSZ | AD604ARSZ-RL | AD604ARS-REEL |
|---|---|---|---|---|
| Package | SSOP-24 | SSOP-24 | SSOP-24 | SSOP-24 |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Type | Dual variable gain amplifier | Dual variable gain amplifier | Dual variable gain amplifier | Dual variable gain amplifier |
| Number of Channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Gain Control | Linear in dB | Linear in dB | Linear in dB | Linear in dB |
| Signal Bandwidth | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Slew Rate | 170 V/µs | 170 V/µs | 170 V/µs | 170 V/µs |
| Signal Output Current | 40 mA | 40 mA | 40 mA | 40 mA |
Ana Farklılayıcılar
- Documented same-footprint substitution path (karşılaştırma:AD604ARSZ)
- Dual 40 MHz variable-gain channels in one package (karşılaştırma:AD604AR)
- Linear-in-dB gain control for time-based attenuation (karşılaştırma:AD604ARSZ-RL)
Tasarım Notları
Route the gain-control input as a short, guarded analog trace and keep it away from switching-node copper, clocks, and high-current return paths. Because gain-control noise can modulate the attenuation ratio, use a quiet reference source, solid ground-plane continuity, and the decoupling arrangement shown in the AD604 datasheet. Confirm the control-voltage range and grounding configuration before defining the external network.
Place the required input, output, and supply-decoupling capacitors close to their corresponding SSOP-24 pins. Keep the analog return current beneath the device where practical and avoid splitting the ground plane under the package. The AD604's 40 MHz bandwidth and 170 V/µs slew rate mean that package lead inductance and long supply routes can degrade stability or introduce coupling into the gain-control path.
Do not treat AD604ARS, AD604ARSZ, AD604ARSZ-RL, and AD604ARS-REEL as identical without checking the suffix-specific ordering information. The documented variants share the SSOP-24 format and are described as functionally consistent, but lead finish, packing, and ordering conditions can differ. Before substitution, verify supply limits, gain-control range, gain accuracy, noise, pin names, and the applicable lifecycle and compliance statements.
Uyumluluk Bilgisi
The manufacturer identifies the AD604 as a production product, but exact suffix-specific environmental and material compliance declarations must be confirmed in the AD604 product documentation or the relevant manufacturer declaration.