Analog Devices

ADF4153ABCPZ - 4GHz Fractional-N PLL | Analog Devices

MPN: ADF4153ABCPZ ✓ Aktif
20-WFQFN exposed-pad CSP Package 4 GHz Speed
MOQ: 1 |

ADF4153ABCPZ Genel Bakış

Analog Devices ADF4153ABCPZ is a 4 GHz fractional-N frequency synthesizer used to create local-oscillator signals in wireless receiver and transmitter upconversion and downconversion paths. The device combines a low-noise digital phase-frequency detector, a precision charge pump, and a programmable reference divider. A sigma-delta fractional interpolator enables programmable fractional-N operation, supporting flexible frequency planning where a conventional integer-N synthesizer would require an impractical division ratio. The component is packaged in a 20-WFQFN exposed-pad CSP package.

A fractional-N frequency synthesizer is a phase-locked-loop device that synthesizes an adjustable output frequency from a stable reference. In a wireless transceiver, a local oscillator drives mixers in the RF signal path. The ADF4153A family combines integer-N and fractional-N synthesis in one RF PLL, while its programmable reference divider and low-noise phase detector support the phase-noise and spur trade-offs inherent in fractional-N architectures. The result is a flexible frequency-generation block suitable for RF systems where the required channel spacing and output range must coexist within a compact circuit.

The ADF4153ABCPZ reaches an upper operating frequency of 4 GHz. Its fractional-N architecture provides a practical way to obtain fine frequency increments without relying solely on integer division. Designers must still account for fractional spurs, reference phase noise, loop bandwidth, charge-pump settings, and filtering requirements. The PFD, charge pump, reference divider, and sigma-delta fractional interpolator form the core control path, while external passive and RF networks provide reference conditioning, loop filtering, and impedance matching.

Typical uses include wireless receiver and transmitter local oscillators, upconversion and downconversion sections, and other RF communication systems requiring programmable frequency generation. The same synthesis principles apply in instrumentation, test equipment, and frequency-generation subsystems, although each application needs its own phase-noise, spur, tuning-speed, and output-drive evaluation. The manufacturer product page specifically identifies wireless receiver and transmitter local oscillators as core applications.

A critical implementation step is to preserve the reference-signal quality presented to the synthesizer because reference phase noise and unwanted modulation can propagate into the generated output. The exposed thermal pad also requires a deliberate PCB thermal strategy, including suitable copper and via placement, so that heat from the synthesizer is removed effectively. Loop-filter component selection should be completed against the intended channel spacing and phase-noise target rather than by copying values without checking fractional spur behavior.

This page summarizes the verified product identity, RF synthesizer function, frequency capability, package, and family alternatives. It also adds application guidance, drop-in-replacement assessment, and engineering design notes intended to help engineers evaluate the ADF4153ABCPZ before committing it to an RF board design.

Drop-in alternatifler için ADF4153ABCPZ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller ADF4153ABCPZ (aynı form faktörü ve ayağa oturma) — farklı olan Package, Charge Pump, Operating Temperature Range.

Analog Devices
Package: 20-pin VFQFN with exposed pad
Operating Temperature Range: -40 °C to +85 °C
İle Karşılaştır ADF4153ABCPZ →
Analog Devices
Package: 20-lead WFQFN with exposed pad
Charge Pump: Precision charge pump with programmable current
Operating Temperature Range: -40°C to +80°C
İle Karşılaştır ADF4153ABCPZ →

ADF4153BCPZ

✅ Yerleştirme
Analog Devices
📦 20-lead WFQFN exposed pad
Fractional-N frequency synthesizer · 4 GHz · 10 MHz · 3.3 V · Fractional-N phase-locked loop · Low-noise digital phase-frequency detector · Precision charge pump · 20 pins

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

ADF4154BCPZ

✅ Yerleştirme
Analog Devices
📦 20-lead WFQFN exposed pad
Fractional-N frequency synthesizer · 4 GHz · 500 MHz · 2.7 V to 3.3 V · 2.7 V to 3.3 V · 2.7 V to 3.3 V · AVDD to 5.5 V · 4/5 and 8/9

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

ADF4152BCPZ

✅ Yerleştirme
📦 20-lead WFQFN exposed pad
Same 20-lead WFQFN footprint and fractional-N architecture from the same synthesizer family, but different divider ranges and feature set, so N and fractional programming must be reworked for the target frequency plan

📋 Katalogda Olmayan Referans Alternatifi

ADF4153ABCPZ Özellikler

Product Type Fractional-N frequency synthesizer
Maximum Synthesized Frequency 4 GHz
Input Frequency Range 10 MHz to 4 GHz
Architecture Fractional-N phase-locked loop
Phase Detector Low-noise digital phase-frequency detector
Charge Pump Precision charge pump
Reference Divider Programmable
Fractional Interpolator Programmable sigma-delta fractional interpolator
Number of Channels 1 channel
Paket 20-WFQFN exposed-pad CSP
Pin Sayısı 20 pins
Montaj Türü Surface mount

ADF4153ABCPZ 20-wfqfn exposed-pad csp Pin Yapısı Kılavuzu

ADF4153ABCPZ (20-wfqfn exposed-pad csp paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

20-wfqfn exposed-pad csp paket pin çizelgesi için ADF4153ABCPZ

Ayrıntılı pin çıkış verisi mevcut değil: ADF4153ABCPZ.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

ADF4153ABCPZ için uygundur 6 uygulamas: Wireless Receiver Local Oscillator, Wireless Transmitter Upconversion, RF Downconversion and Upconversion, Programmable RF Signal Source, Test and Measurement Instrumentation, RF Communication Test Modules.

🌐

Wireless Receiver Local Oscillator

The ADF4153ABCPZ fits a wireless receiver because it generates a programmable local-oscillator signal for the mixers used in RF downconversion. Its fractional-N architecture provides finer frequency increments than ordinary integer-N division, which helps reconcile narrow channel spacing with a synthesizer operating up to 4 GHz. The design should use a low-phase-noise reference, a correctly calculated loop filter, and matched RF routing between the synthesizer output and the receiver mixer. Particular attention belongs on fractional spurs, mixer drive level, image rejection, and isolation between the oscillator and sensitive receiver nodes.

📡

Wireless Transmitter Upconversion

In a wireless transmitter, the ADF4153ABCPZ can supply the programmable RF local oscillator used to translate a modulated intermediate-frequency signal toward the transmit band. Fractional-N synthesis makes practical channel placement possible without relying on an extreme integer feedback divider, while operation extending to 4 GHz covers many RF transmit architectures. The synthesizer's reference quality, loop-filter response, output matching, and filtering directly affect phase noise and unwanted modulation products. Power-supply layout, VCO isolation, and thermal management also require verification because oscillator phase noise can degrade adjacent-channel performance.

📶

RF Downconversion and Upconversion

The ADF4153ABCPZ is appropriate for RF conversion systems that need a stable, digitally controlled oscillator at the input of a mixer. Its 4 GHz capability supports common microwave signal chains, while the fractional-N divider allows the synthesized frequency to be placed with relatively fine resolution. Depending on the architecture, the synthesizer can drive an external VCO or provide the reference associated with the RF conversion function. Engineers should evaluate the complete synchronization path, reference multiplication strategy, output amplitude, spur levels, and behavior during reference loss before fixing the system architecture.

📟

Programmable RF Signal Source

A laboratory or production RF signal source can use the ADF4153ABCPZ to create a programmable oscillator with fractional frequency resolution up to 4 GHz. The device is especially useful when a system requires controlled channel changes without redesigning a fixed integer divider ratio. Practical implementation needs a stable reference, a frequency-programming interface, an output leveling or attenuation network, and calibration for amplitude accuracy. The loop settings should support the required settling time, while the output chain must control harmonics and spurious signals that could distort measurements or interfere with the equipment under test.

🖥️

Test and Measurement Instrumentation

The ADF4153ABCPZ can serve as the programmable RF source inside a test instrument that generates coherent excitation or conversion references. Fractional-N operation makes it easier to cover discrete frequencies or narrow channel steps, and the 4 GHz upper limit supports many microwave test scenarios. Measurement accuracy still depends on the reference oscillator, calibration method, output-power flatness, and path delay. Designers should include programmable attenuation or closed-loop leveling, characterize harmonics and spurs, and isolate the synthesizer from sensitive measurement channels to prevent phase noise or unwanted coupling from raising the noise floor.

🧩

RF Communication Test Modules

The ADF4153ABCPZ is suitable for compact communication test modules that need to generate programmable local-oscillator signals during receiver or transmitter characterization. Its fractional-N operation supports fine frequency offsets, and its programmable architecture simplifies automated channel selection over a broad RF range. The module should use a low-noise reference and carefully terminated RF output so reflections, cables, and mismatched test fixtures do not alter the synthesizer's phase-noise or spur performance. Software should also manage lock-state monitoring, valid tuning sequences, and calibration data so that an unlocked condition cannot be mistaken for a valid measurement.

Önerilen Ürünler Özeti

ADF4152 Analog Devices RF synthesizer family member Kullanıldığı Yer: Wireless Receiver Local Oscillator, RF Downconversion and Upconversion, Test and Measurement Instrumentation ADF4153ABCPZ Analog Devices Kullanıldığı Yer: Wireless Receiver Local Oscillator, Wireless Transmitter Upconversion, Test and Measurement Instrumentation ADF4154 Analog Devices RF synthesizer family member Kullanıldığı Yer: Wireless Transmitter Upconversion, Programmable RF Signal Source, RF Communication Test Modules ADF4156 Analog Devices RF synthesizer family member Kullanıldığı Yer: RF Downconversion and Upconversion, Programmable RF Signal Source, RF Communication Test Modules
What is the ADF4153ABCPZ?
The ADF4153ABCPZ is a single-channel, 4 GHz fractional-N frequency synthesizer from Analog Devices. It generates an RF output from a reference signal for use as a local oscillator in wireless receivers and transmitters. According to the Analog Devices ADF4153A product information, the circuit includes a low-noise digital phase-frequency detector, a precision charge pump, a programmable reference divider, and a sigma-delta fractional interpolator. Its defining feature is fractional-N synthesis, which provides finer frequency increments than integer-N division while supporting operation up to 4 GHz.
What are the key specifications of ADF4153ABCPZ that engineers should know?
The ADF4153ABCPZ is a 4 GHz, single-channel fractional-N RF synthesizer in a 20-WFQFN exposed-pad CSP package. Its principal architecture includes a low-noise digital phase-frequency detector, a precision charge pump, a programmable reference divider, and a sigma-delta fractional interpolator. According to the Analog Devices ADF4153A product page, these blocks support local-oscillator generation in wireless upconversion and downconversion paths. Engineers should evaluate reference-input requirements, phase noise, fractional spur behavior, loop-filter design, output matching, and exposed-pad thermal management for the intended RF operating conditions.
Where can I download the ADF4153ABCPZ datasheet PDF?
The official ADF4153ABCPZ datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/adf4153.pdf. The document covers the ADF4153 fractional-N frequency synthesizer family and includes the electrical specifications, pin descriptions, applications information, and reference circuitry needed for board-level evaluation. Because the ADF4153ABCPZ includes the A revision and automotive-related ordering options, designers should check the package, temperature, and qualification suffixes carefully before applying every family-level condition to their exact ordering code.
Where can I find the ADF4153ABCPZ pinout?
The ADF4153ABCPZ pinout is shown in the Analog Devices ADF4153 manufacturer datasheet, which uses the official 20-WFQFN exposed-pad package drawing. The exposed pad is part of the thermal and electrical package arrangement and must be connected according to the manufacturer's land pattern and assembly guidance. Use the pin-description table in that datasheet when assigning PCB tracks, programming the synthesizer, connecting the reference signal, and defining the exposed-pad copper area. The device is a 20-pin surface-mount component, but no complete pin table is duplicated here to avoid introducing transcription errors into a safety- and signal-sensitive RF layout.
What is the operating frequency of ADF4153ABCPZ?
The ADF4153ABCPZ supports synthesized RF operation up to 4 GHz. Product listings also identify a 10 MHz to 4 GHz input range for the fractional-N synthesizer family. According to the Analog Devices manufacturer datasheet, the exact operating limits depend on the power supply, reference configuration, VCO characteristics, and register settings used in the external loop. When evaluating the 4 GHz upper limit, include headroom for RF matching, filtering, PCB loss, and the amplitude required by the receiving or transmitting mixer rather than assuming that every downstream stage can be driven directly.
Can ADF4153ABCPZ be used in wireless transmitters and receivers?
Yes, the ADF4153ABCPZ is specifically intended for local-oscillator generation in wireless receiver and transmitter upconversion and downconversion sections. Analog Devices describes the ADF4153A as a fractional-N frequency synthesizer for those signal paths. In a receiver, it can tune the oscillator presented to a mixer, while in a transmitter it supplies a programmable RF reference used for upconversion. Practical implementation still requires a suitable reference source, loop filter, RF matching network, output filtering, and phase-noise and spur analysis against the modulation requirements of the complete transceiver.
What is the difference between integer-N and fractional-N operation in ADF4153ABCPZ?
The principal difference is frequency resolution and synthesizer architecture. An integer-N PLL divides the feedback frequency by a whole number, while the ADF4153ABCPZ uses a sigma-delta fractional interpolator to implement fractional-N operation and obtain finer tuning increments. This is useful when a required channel spacing would otherwise require an impractically large integer division ratio. The trade-off is additional consideration of fractional spurs and loop dynamics. According to the Analog Devices ADF4153A product information, both integer-N and fractional-N synthesis are supported within the same family architecture.
How should I design the loop filter for ADF4153ABCPZ?
The loop filter should be selected against the required phase noise, reference phase noise, channel spacing, tuning time, and fractional-spur limits rather than copied from a generic example. The ADF4153ABCPZ combines a precision charge pump with a sigma-delta fractional interpolator, so charge-pump current, reference-divider settings, fractional divider value, and PFD frequency all influence the closed-loop response. Use the manufacturer datasheet and reference design guidance to establish a valid starting point, then verify the chosen filter in simulation. Include temperature, component tolerance, and intended reference-clock variation when evaluating spur and lock-performance margins.
What thermal and PCB considerations apply to the ADF4153ABCPZ?
The ADF4153ABCPZ uses a 20-WFQFN exposed-pad package, so its PCB land pattern must provide both electrical and thermal paths under the device. Place input, output, and decoupling connections according to the manufacturer's pinout and recommended layout, and connect the exposed pad to the specified ground-plane structure. Use multiple thermal vias where the package guidance permits them, maintain solder-mask and paste control, and avoid placing thermally restrictive assembly hardware over the pad unless the package instructions explicitly allow it. Validate the final assembly under the maximum expected ambient temperature and RF operating condition.
When should I choose ADF4153ABCPZ instead of ADF4152, ADF4154, or ADF4156?
Choose the ADF4153ABCPZ when the design needs a fractional-N synthesizer with operation extending to 4 GHz and when its exact electrical and pin configuration match the target board. The ADF4152, ADF4154, and ADF4156 appear as functional alternatives in the same Analog Devices RF-synthesizer family, but a similar function does not establish pin-to-pin compatibility. Compare maximum RF frequency, channel count, reference input, required control interface, package, divider architecture, and register behavior before choosing a substitute. If any of those conditions differ, treat the change as a redesign and review the schematic, firmware, layout, and RF calibration together.
Is ADF4153ABCPZ the same as ADF4152?
No, the ADF4153ABCPZ should not be assumed to be interchangeable with the ADF4152 merely because both are Analog Devices RF frequency synthesizers. The ADF4153ABCPZ has a 4 GHz maximum operating frequency and includes the PFD, precision charge pump, programmable reference divider, and sigma-delta fractional interpolator architecture associated with the ADF4153A family. An ADF4152 may differ in frequency range, channel count, divider arrangement, programming model, package, or lead assignment. Confirm pin compatibility and register compatibility from each manufacturer's datasheet before treating either device as a drop-in replacement.
What is the best drop-in replacement for ADF4153ABCPZ?
The only confirmed same-footprint ordering variant identified for the exact device is ADF4153ABCPZ-RL7, which represents a different reel packing arrangement rather than an electrically distinct replacement. No other part in the retrieved cross-reference material was established as both pin-to-pin compatible and parametrically equivalent in the 20-WFQFN footprint. Therefore, no cross-family MPN should be described as a guaranteed drop-in replacement without a manufacturer-level pin and register comparison. For a board already designed around ADF4153ABCPZ, verify a proposed substitute against supply frequency, supply voltage, register map, RF output range, package dimensions, and exposed-pad requirements.
Where can I buy ADF4153ABCPZ and what is its current price?
Use the Request a Quote form on this page to request the current ADF4153ABCPZ price, stock position, minimum order quantity, and lead time. The product is listed by multiple authorized channels, but the retrieved records do not provide a qualifying quantity-break price table for the exact ADF4153ABCPZ ordering code. A separate ADF4153ABCPZ-RL7 listing is not interchangeable for pricing extraction because its packing suffix differs. A written quote tied to the exact 20-WFQFN ordering code is the appropriate way to confirm commercial availability and avoid mixing product variants.
What is the lead time for ADF4153ABCPZ?
The current lead time for ADF4153ABCPZ should be confirmed through the Request a Quote form on this page. The manufacturer product page and distributor records identify the component, but the retrieved information does not establish a dated, orderable lead-time commitment for the exact suffix. Lead time can vary with order quantity, production status, regional inventory, and packaging requirements, so a general availability statement is insufficient for project planning. When requesting a quote, specify the required quantity and whether the parts must be supplied in the standard ADF4153ABCPZ tray configuration or another approved packing arrangement.
Is ADF4153ABCPZ in stock?
Current stock for the exact ADF4153ABCPZ ordering code should be confirmed through the Request a Quote form on this page. Distributor product pages indicate that the component is offered, but the retrieved records do not contain a reliable quantity-specific stock statement for this exact suffix. Do not treat the existence of a listing or a related reel-packed variant as proof that the requested package form is immediately available. Provide the required order quantity and target delivery date with the quote request so that allocation, packaging, and logistics can be confirmed for the precise 20-WFQFN component.
Is ADF4153ABCPZ suitable for automotive RF applications?
The ADF4153 datasheet notes that automotive models can have specifications that differ from commercial models and directs designers to review the Specifications section carefully. The retrieved material does not explicitly identify ADF4153ABCPZ as an automotive-qualified ordering code, so its qualification status should be confirmed against the manufacturer's ordering table before it is placed in an automotive design. Automotive use may impose requirements for temperature range, quality grade, traceability, change control, and production longevity beyond ordinary industrial operation. Confirm the exact suffix and qualification rather than inferring status from the device family alone.
What is the best Analog Devices equivalent for ADF4153ABCPZ?
The closest confirmed Analog Devices functional alternatives identified are ADF4152, ADF4154, and ADF4156, all from the same RF-synthesizer family. None is established here as a guaranteed drop-in replacement because the retrieved material does not prove identical package dimensions, pin assignment, supply architecture, register compatibility, and operating limits. ADF4153ABCPZ is the preferred choice when its 4 GHz upper frequency and exact interface are required. Use ADF4154 or ADF4156 only when their additional range or features justify a full redesign, and use ADF4152 only when its particular specifications meet the complete RF and control requirements.

Mühendislik referans verileri: ADF4153ABCPZ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the ADF4153ABCPZ when the RF design specifically requires a single-channel fractional-N synthesizer with operation extending to 4 GHz and compatibility with the 20-WFQFN exposed-pad implementation. It is well suited to programmable local oscillators in wireless receivers and transmitters because the architecture combines a low-noise digital PFD, precision charge pump, programmable reference divider, and sigma-delta fractional interpolator. Consider ADF4152 when its lower-range family characteristics better match the intended design, and consider ADF4154 or ADF4156 when their additional specifications provide a clear system benefit. These family members are not established as guaranteed drop-in replacements: verify package dimensions, pin assignment, supply voltages, reference requirements, RF limits, and register compatibility before approving a substitution. For an existing ADF4153ABCPZ PCB, changing to another family member may require schematic, layout, firmware, and RF calibration changes.

Ana Farklılayıcılar

  • Up to 4 GHz fractional-N RF synthesis (karşılaştırma:ADF4152)
  • Sigma-delta fractional interpolator in the synthesizer architecture (karşılaştırma:ADF4154)
  • Single-channel 20-WFQFN implementation (karşılaştırma:ADF4156)

Tasarım Notları

Implement the 20-WFQFN land pattern exactly as specified by Analog Devices, including the exposed-pad geometry, solder-mask opening, and paste pattern. Connect the exposed pad to the package's designated ground structure rather than treating it only as an optional thermal feature. Use short RF traces, controlled impedance where applicable, and minimal parasitic loading between the synthesizer output and the next RF stage. Place the phase-frequency detector and charge-pump loop-filter components close to their associated pins to reduce sensitivity to board noise and distributed inductance.

Begin the reference and loop design with the required reference frequency, phase noise, channel spacing, and settling-time targets. The programmable reference divider, fractional divider, PFD frequency, charge-pump current, and loop-filter components collectively determine phase noise and fractional-spur performance. Simulate the intended settings before fabrication, then include tolerances and temperature variation rather than evaluating only nominal values. A stable reference is essential because reference phase noise and spur content propagate through the PLL and can dominate the synthesizer output in low-noise systems.

The exposed pad requires deliberate thermal construction. Provide the manufacturer-recommended copper area and via arrangement beneath the device, while avoiding unintended voids in the ground and thermal path. Assess temperature rise using the actual PCB stack-up, copper coverage, via count, airflow, and adjacent heat sources. The manufacturer's datasheet and package information should define allowable reflow and absolute-temperature limits; do not infer those limits from the generic package name. Verify thermal performance in the final assembly because RF operating conditions can increase device dissipation.

Do not treat the ADF4152, ADF4154, and ADF4156 family alternatives as automatic substitutions for the ADF4153ABCPZ. Similar RF-synthesizer functions do not guarantee identical supply pins, reference-divider ranges, register maps, package dimensions, or RF limits. Also avoid confusing ADF4153ABCPZ with ADF4153ABCPZ-RL7 when creating a purchasing or assembly plan: the latter denotes a different packing arrangement. For any proposed substitute, perform a pin-by-pin, voltage-by-voltage, register-by-register, and RF-layout review before approving a drop-in claim.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The retrieved manufacturer material notes that automotive models may have different specifications, but it does not explicitly establish the qualification status of the exact ADF4153ABCPZ ordering code. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product declaration.

İlgili Aramalar

ADF4153ABCPZ datasheet ADF4153ABCPZ datasheet pdf ADF4153ABCPZ pinout ADF4153ABCPZ specifications ADF4153ABCPZ equivalent ADF4153ABCPZ replacement ADF4153ABCPZ cross reference ADF4153ABCPZ price ADF4153ABCPZ stock Analog Devices ADF4153ABCPZ ADF4153ABCPZ 4GHz fractional N ADF4153ABCPZ 20-WFQFN pinout ADF4153ABCPZ wireless local oscillator ADF4153ABCPZ vs ADF4154 ADF4153ABCPZ footprint

İlgili Bileşenler ve Terimler

Analog Devices ADF4153ABCPZ ADF4153A ADF4152 ADF4154 ADF4156 fractional-N frequency synthesizer phase-locked loop PLL local oscillator wireless receiver wireless transmitter RF upconversion RF downconversion phase-frequency detector PFD precision charge pump programmable reference divider sigma-delta fractional interpolator 20-WFQFN exposed-pad CSP QFN package family surface-mount technology fractional spur phase noise reference clock
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle