ADF4216BRUZ - 1.2GHz Dual PLL Synthesizer | Analog Devices
MPN: ADF4216BRUZ ✓ AktifADF4216BRUZ Genel Bakış
A frequency synthesizer is a clock-generation and timing component that locks an output signal to a stable reference frequency. In a programmable PLL, a phase-frequency detector compares the divided output with the reference signal, while a charge pump and loop filter convert phase error into a control voltage that tunes the voltage-controlled oscillator. This architecture belongs to the hierarchy of PLL frequency synthesizer, clock generator, timing IC, and semiconductor.
The ADF4216 family supports selectable charge-pump currents and dual-modulus prescalers. The listed RF prescaler is 64/65, with an IF prescaler option of 16/17. Its maximum synthesis frequency is 1.2 GHz, while the family also supports a 550 MHz operating mode. The 3-wire serial interface allows a host processor to set divider, reference, charge-pump, and prescaler parameters for the target channel plan.
The device is intended for wireless receiver and transmitter architectures that require local oscillators for RF up-conversion, RF down-conversion, or IF sections. Its dual-channel architecture can supply separate RF and IF local-oscillator signals, reducing the number of synthesis paths required in a multi-band transceiver. Reference-divider flexibility allows the reference frequency to be accommodated without redesigning the complete PLL configuration.
Typical uses include microwave radio equipment, wireless transceiver modules, IF-generating receiver chains, and instrumentation requiring programmable frequency generation. Design work should account for loop-filter bandwidth, reference phase noise, charge-pump settings, prescaler selection, and output-divider ratios. The voltage-controlled oscillator and charge-pump loop must be optimized together to achieve the required phase noise and lock behavior.
Because the PLL reference, feedback divider, and output divider determine the synthesized frequency, verify every ratio against the programming table in the manufacturer datasheet before releasing a PCB. Keep the serial programming traces away from sensitive RF and reference paths, provide stable decoupling at the supply pins, and follow the manufacturer’s recommended loop-filter component values to avoid changing lock time or phase-noise performance.
This page combines the family-level technical specifications, package and interface details, application guidance, and drop-in replacement analysis needed to evaluate the ADF4216BRUZ before it is placed into an RF or IF clock-generation design.
Drop-in alternatifler için ADF4216BRUZ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller ADF4216BRUZ (aynı form faktörü ve ayağa oturma) — farklı olan Package, RF Prescaler, Charge Pump, Device Type, IF Prescaler.
ADF4216BRUZ-RL
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ADF4216BRUZ-RL7
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
ADF4216BRU
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ADF4217BRUZ
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
ADF4218BRUZ
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
ADF4216BRUZ Özellikler
| Device Type | Clock/frequency synthesizer (RF/IF) IC |
| Architecture | Dual RF PLL frequency synthesizer |
| Maximum Output Frequency | 1.2 GHz |
| Maximum Output Frequency | 1.2 GHz |
| Minimum Supply Voltage | 2.7 V |
| Maximum Supply Voltage | 5.5 V |
| RF Prescaler | 64/65 |
| IF Prescaler | 16/17 |
| Programming Interface | 3-wire serial interface |
| Phase-Frequency Detector | Low-noise digital PFD |
| Charge Pump | Precision charge pump with selectable current |
| Reference Divider | Programmable |
| Number of Circuits | 1 |
| Paket | 20-lead TSSOP |
| Package Width | 4.40 mm |
| Montaj Türü | Surface mount |
ADF4216BRUZ 4.40 mm Pin Yapısı Kılavuzu
ADF4216BRUZ (4.40 mm paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: ADF4216BRUZ.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
ADF4216BRUZ için uygundur 6 uygulamas: Wireless Transmitter Local Oscillator, Wireless Receiver RF Down-Conversion, IF Section Local Oscillator, Instrumentation Signal Source, Microwave Radio Equipment, Frequency-Programmable Communication Module.
Wireless Transmitter Local Oscillator
ADF4216BRUZ fits a wireless transmitter requiring programmable local-oscillator generation for RF up-conversion. Its maximum synthesis frequency of 1.2 GHz supports RF-channel generation within the listed operating range, while the programmable reference divider adapts the relationship between the system reference and output frequency. The dual RF/IF architecture can reduce the number of separate synthesis paths in a transceiver, and the 3-wire interface allows a host controller to configure divider and charge-pump parameters. The principal design trade-off is loop performance: reference phase noise, selected charge-pump current, and the external loop filter determine phase noise and lock behavior.
Önerilen
Wireless Receiver RF Down-Conversion
ADF4216BRUZ can generate the RF local oscillator used during receiver down-conversion. The 1.2 GHz maximum output frequency defines the upper end of the listed synthesis range, while the programmable reference and dual-modulus prescaler paths provide flexibility for translating a stable reference into a channel-specific local-oscillator frequency. The low-noise digital phase-frequency detector and selectable charge-pump currents are central to achieving a stable lock. Designers should optimize the loop filter for the intended reference, divider ratios, acquisition time, and phase-noise target rather than treating the synthesizer as a fixed-frequency clock source.
Önerilen
IF Section Local Oscillator
ADF4216BRUZ is suitable for generating an intermediate-frequency local oscillator because the ADF4216 family is explicitly intended to provide LO signals for RF and IF sections of wireless receivers and transmitters. The 16/17 IF prescaler option, programmable reference divider, and 3-wire control interface support flexible frequency planning across multiple channels. The 2.7 V to 5.5 V operating range also allows integration with low-voltage radio logic. A practical implementation still requires careful loop-filter design, stable reference routing, and isolation between the charge-pump path and sensitive receiver circuitry.
Önerilen
Instrumentation Signal Source
ADF4216BRUZ can serve as a programmable RF signal-source element in test and measurement equipment. Its maximum output frequency of 1.2 GHz, selectable dual-modulus prescaler, and programmable reference divider permit synthesis of multiple frequencies from a common reference. The 3-wire interface simplifies integration with laboratory controllers or embedded test electronics, while the dual architecture can generate separate RF and IF-related outputs. The key engineering constraint is phase-noise performance: use a low-noise reference, select the charge-pump current intentionally, and calculate the loop bandwidth against the required settling time and spectral purity.
Önerilen
Microwave Radio Equipment
ADF4216BRUZ fits programmable microwave-radio local-oscillator blocks that require an output range extending to 1.2 GHz. Its dual RF/IF synthesizer organization can support a receiver, transmitter, or combined transceiver by generating coherent channel-related outputs from the same reference. The programmable reference divider and RF prescaler simplify the relationship between the system reference and channel plan. Because RF synthesizers are sensitive to reference and loop-filter noise, route the reference input carefully, decouple the supply locally, and follow the manufacturer’s reference layout to preserve the intended phase-noise and lock-time behavior.
Önerilen
Frequency-Programmable Communication Module
ADF4216BRUZ can provide programmable local-oscillator generation in compact communication modules whose operating channel changes in the field. A controller can use the 3-wire interface to update divider and prescaler-related settings, allowing one synthesizer design to support multiple operating frequencies. The 20-lead TSSOP package supports compact surface-mount construction, and the listed 2.7 V minimum supply voltage is suitable for low-voltage radio designs. Before deployment, verify that the selected reference frequency, output divider, and loop filter provide adequate lock time and phase noise under temperature, supply, and aging conditions.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: ADF4216BRUZ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Consider ADF4217BRUZ or ADF4218BRUZ only when their higher-frequency capability is needed and their complete register, divider, prescaler, and electrical characteristics have been checked against the target design. ADF4212LBRUZ should be treated as a redesign candidate rather than a drop-in choice because the comparison information does not prove pin and register compatibility. For every substitution, verify the manufacturer ordering guide, package drawing, pin description, programming map, loop-filter requirements, lifecycle status, and operating-temperature range before releasing the PCB.
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | ADF4216BRUZ-RL | ADF4216BRUZ-RL7 | ADF4216BRU | ADF4217BRUZ | ADF4218BRUZ |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 20-lead TSSOP | 20-lead TSSOP | 20-lead TSSOP | 20-lead TSSOP | 20-lead TSSOP | 20-lead TSSOP |
| Device Type | Dual RF PLL frequency synthesizer | Clock/frequency synthesizer (RF/IF) IC | Clock/frequency synthesizer (RF/IF) IC | Clock/frequency synthesizer (RF/IF) IC | Dual RF PLL frequency synthesizer | Dual RF PLL frequency synthesizer |
Ana Farklılayıcılar
- Exact ADF4216 family 1.2 GHz maximum output frequency (karşılaştırma:ADF4217BRUZ)
- Documented 20-lead TSSOP package continuity (karşılaştırma:ADF4212LBRUZ)
- Programmable RF and IF synthesis functions (karşılaştırma:ADF4216BRUZ-RL)
Tasarım Notları
Follow the manufacturer’s reference layout for the charge-pump output, loop filter, reference input, VCO connections, and supply bypass components. Keep input and output capacitors close to their designated pins, provide an uninterrupted ground path, and avoid routing the 3-wire programming signals adjacent to sensitive reference and charge-pump nodes. The 20-lead TSSOP footprint is compact, so small component spacing can increase coupling between the digital control path and the PLL loop.
Treat the reference input as a precision signal path even though it is programmed through a divider. Use short traces, a continuous reference ground, and decoupling appropriate to the reference source. The listed low-noise digital phase-frequency detector supports low-noise synthesis, but the resulting phase-noise performance also depends on reference quality, divider ratios, charge-pump selection, and loop-filter design. Validate those choices together instead of optimizing the loop filter in isolation.
Confirm the complete frequency equation using the programmed reference divider, RF or IF prescaler, N-divider, and output-divider settings before configuring the device. A valid integer-N relationship does not guarantee acceptable lock behavior or phase noise. Review the manufacturer’s register definitions and programming sequence, and avoid treating ADF4212LBRUZ as an automatic replacement merely because both products use a 20-lead TSSOP package.
Uyumluluk Bilgisi
The component is a frequency-synthesizer IC, so AEC-Q100 qualification is not treated as an automotive qualification. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer’s current product documentation or declaration.