ADRV9004BBCZ-REEL - Dual RF Transceiver 30MHz-6GHz | Analog Devices
MPN: ADRV9004BBCZ-REEL ✓ AktifADRV9004BBCZ-REEL Genel Bakış
An RF transceiver is a device that combines both transmit and receive functions in a single module, enabling bidirectional communication over radio frequencies. In the hierarchy of wireless communication, an RF transceiver sits between the baseband processor and the antenna, handling the conversion of digital data to RF signals for transmission and RF signals to digital data for reception. The ADRV9004 belongs to the family of software-defined radio (SDR) transceivers, which allow flexible configuration of frequency, bandwidth, and modulation schemes via software, making them ideal for multi-standard and multi-band systems.
Key features of the ADRV9004BBCZ-REEL include dual-channel operation, a wide frequency range from 30 MHz to 6 GHz, and a maximum output power of 7.8 dBm. The device supports both CMOS and LVDS serial synchronous interfaces (SSI) for high data rate and low data rate communication with baseband processors. Its high linearity and dynamic range ensure reliable performance in demanding environments, while the integrated synthesizers reduce external component count and simplify design.
Technically, the ADRV9004 employs advanced mixed-signal processing, including digital filtering and calibration algorithms, to optimize performance across its operating range. The device is packaged in a 12 mm × 12 mm, 196-ball chip scale package ball grid array (CSP_BGA), which provides excellent thermal and electrical performance. The REEL suffix indicates tape-and-reel packaging, suitable for automated assembly in high-volume production.
Typical applications include 5G NR small cells, point-to-point microwave links, satellite communications, and test and measurement equipment. The wide frequency range and dual-channel capability make it a versatile choice for both commercial and industrial wireless systems.
When designing with the ADRV9004, careful attention must be paid to power supply decoupling and PCB layout to maintain signal integrity and minimize noise. The device requires multiple supply rails, and proper filtering is essential to achieve the specified performance.
Drop-in alternatifler için ADRV9004BBCZ-REEL — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller ADRV9004BBCZ-REEL (aynı form faktörü ve ayağa oturma) — farklı olan Frequency Range, Package, Interface, Number of Transmitters, Supply Voltage.
ADRV9004BBCZ
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ADRV9003BBCZ-REEL
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler✓ Stokta
$623.4375 / Birim
Veri Şablonunu Görüntüle →ADRV9002BBCZ-REEL
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler✓ Stokta
$590.625 / Birim
Veri Şablonunu Görüntüle →ADRV9003BBCZ
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ADRV9002BBCZ
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ADRV9004BBCZ-REEL Özellikler
| Type | TxRx Only |
| Frequency Range | 30 MHz ~ 6 GHz |
| Number of Channels | 2 Tx, 2 Rx |
| Output Power | 7.8 dBm |
| Paket | 196-TFBGA, CSPBGA (12x12 mm) |
| Montaj Türü | Surface Mount |
| Arayüz | CMOS, LVDS |
| RoHS Durumu | Compliant |
| Packaging | Tape & Reel (TR) |
| Product Status | Active |
ADRV9004BBCZ-REEL Pin Yapısı
| Pin A1 | GND — Ground |
| Pin A2 | VDD — Power supply |
| Pin A3 | TX1_P — Transmit channel 1 positive |
| Pin A4 | TX1_N — Transmit channel 1 negative |
| Pin A5 | TX2_P — Transmit channel 2 positive |
| Pin A6 | TX2_N — Transmit channel 2 negative |
| Pin B1 | RX1_P — Receive channel 1 positive |
| Pin B2 | RX1_N — Receive channel 1 negative |
| Pin B3 | RX2_P — Receive channel 2 positive |
| Pin B4 | RX2_N — Receive channel 2 negative |
| Pin B5 | CLK_P — Clock positive |
| Pin B6 | CLK_N — Clock negative |
Tipik Uygulamalar
ADRV9004BBCZ-REEL için uygundur 6 uygulamas: 5G NR Small Cells, Point-to-Point Microwave Links, Satellite Communications, Test and Measurement Equipment, Military and Aerospace, IoT and Smart Grid.
5G NR Small Cells
The ADRV9004BBCZ-REEL is ideal for 5G NR small cells due to its wide frequency range (30 MHz to 6 GHz) and dual-channel capability. It supports both FDD and TDD modes, enabling flexible deployment in urban and indoor environments. The high linearity and dynamic range ensure reliable signal transmission and reception, while the integrated synthesizers reduce external component count, simplifying design and lowering BOM cost. The device's compact 196-ball CSP_BGA package fits well in space-constrained small cell form factors.
Önerilen
Point-to-Point Microwave Links
For point-to-point microwave links, the ADRV9004BBCZ-REEL provides a highly integrated solution with dual Tx and Rx channels, supporting frequencies up to 6 GHz. Its wide bandwidth and high dynamic range enable high-capacity data transmission over long distances. The device's integrated synthesizers and digital processing reduce system complexity, while the LVDS interface allows seamless connection to baseband processors. The compact package is suitable for outdoor units where space and power are limited.
Önerilen
Satellite Communications
The ADRV9004BBCZ-REEL is well-suited for satellite communication systems, offering a frequency range that covers L, S, and C bands. Its dual-channel architecture supports both uplink and downlink processing, while the high linearity ensures minimal signal distortion. The device's integrated synthesizers and digital filtering enable precise frequency selection and interference rejection. The compact CSP_BGA package is ideal for satellite transceivers where size and weight are critical.
Önerilen
Test and Measurement Equipment
In test and measurement equipment, the ADRV9004BBCZ-REEL provides a flexible RF front-end for signal generation and analysis. Its wide frequency range and dual-channel capability allow simultaneous generation and measurement of multiple signals. The device's high dynamic range and linearity ensure accurate measurements, while the digital signal processing enables real-time calibration and correction. The compact package and low power consumption make it suitable for portable test instruments.
Önerilen
Military and Aerospace
The ADRV9004BBCZ-REEL is suitable for military and aerospace applications requiring reliable, wideband RF transceivers. Its frequency range from 30 MHz to 6 GHz covers many communication and radar bands. The device's high linearity and dynamic range ensure robust performance in harsh environments, while the integrated synthesizers provide fast frequency hopping. The compact CSP_BGA package is ideal for avionics and unmanned systems where space is at a premium.
Önerilen
IoT and Smart Grid
For IoT and smart grid applications, the ADRV9004BBCZ-REEL offers a versatile RF transceiver supporting sub-6 GHz bands. Its dual-channel capability enables simultaneous communication and sensing, while the low power consumption is suitable for battery-operated devices. The device's wide frequency range allows it to adapt to various regional IoT standards. The compact package and integrated features reduce overall system cost and size.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: ADRV9004BBCZ-REEL — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | ADRV9004BBCZ | ADRV9003BBCZ-REEL | ADRV9002BBCZ-REEL |
|---|---|---|---|---|
| Package | 196-TFBGA, CSPBGA | 196-TFBGA, CSPBGA | 196-TFBGA, CSPBGA | 196-TFBGA, CSPBGA |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Frequency Range | 30 MHz ~ 6 GHz | 30 MHz ~ 6 GHz | 75 MHz ~ 6 GHz | 30 MHz ~ 6 GHz |
| Number of Channels | 2 Tx, 2 Rx | 2 Tx, 2 Rx | 2 Tx, 2 Rx | 1 Tx, 1 Rx |
| Packaging | Tape & Reel | Tray | Tape & Reel | Tape & Reel |
| RoHS | Compliant | Compliant | Compliant | Compliant |
| Lifecycle | Active | Active | Active | Active |
Ana Farklılayıcılar
- Wide frequency range from 30 MHz to 6 GHz (karşılaştırma:ADRV9003BBCZ-REEL)
- Dual-channel transceiver (karşılaştırma:ADRV9002BBCZ-REEL)
- Tape-and-reel packaging (karşılaştırma:ADRV9004BBCZ)
Tasarım Notları
The ADRV9004BBCZ-REEL requires multiple power supply rails. Use low-noise LDOs for analog and digital supplies to minimize noise coupling into the RF path. Decouple each supply pin with 100 nF and 10 uF capacitors placed as close as possible to the pins. Refer to the datasheet for recommended supply sequencing to avoid latch-up.
For optimal RF performance, use a 4-layer or more PCB with a solid ground plane. Place the device on a 50-ohm controlled impedance transmission line for RF traces. Keep high-speed digital traces away from RF traces to minimize crosstalk. Use via stitching around the RF sections to ensure good grounding.
The 196-ball CSP_BGA package has a thermal pad that must be soldered to a thermal via array connected to a ground plane for heat dissipation. Ensure adequate copper area on the PCB to keep the junction temperature within limits. For high-power operation, consider adding a heatsink or forced air cooling.
Uyumluluk Bilgisi
RoHS compliant per Mouser and DigiKey listings. Other compliance data not specified in provided sources.
