Texas Instruments

ADS7862Y/2K - Dual 500kHz 12-Bit 4-Channel ADC | Texas Instruments

MPN: ADS7862Y/2K ✓ Aktif
32-pin TQFP (PBS), 5 mm x 5 mm Package
MOQ: 1 |

ADS7862Y/2K Genel Bakış

Texas Instruments ADS7862Y/2K is a dual 12-bit successive-approximation analog-to-digital converter delivering up to 500 kSPS per ADC while sampling four fully differential input channels. The two converters are organized as two simultaneous-sampling pairs, allowing two related signals to be captured under matched timing conditions. The device is packaged in a 32-pin TQFP (PBS) package measuring 5 mm by 5 mm and uses a parallel, 12-bit word-access interface.

An ADC converts continuously varying analog voltages into numerical values for processing by a microcontroller, DSP, FPGA, or other digital controller. Successive-approximation ADCs balance conversion speed, resolution, power consumption, and implementation complexity. The ADS7862 belongs to the data-converter IC hierarchy and is specifically structured for high-speed simultaneous signal acquisition, making it appropriate when relationships between paired analog channels must be preserved during measurement.

Three defining characteristics are its 12-bit conversion resolution, 500 kSPS sampling capability, and four fully differential analog inputs. Grouping the channels as two pairs permits simultaneous conversion within each pair. This architecture is useful for current-and-voltage sensing, differential transducer monitoring, multichannel instrumentation, and other systems where paired signals require coherent timing rather than sequential sampling.

The dual-converter organization supports parallel acquisition while the parallel data interface provides direct connection to suitable digital logic. Input conditioning remains important because differential measurements depend on correct common-mode voltage, input range, source impedance, and protection-network design. Designers should use the manufacturer datasheet for the complete electrical limits, reference configuration, acquisition timing, and recommended input-capacitor network.

Typical uses include industrial process monitoring, motor and drive diagnostics, power-converter feedback, laboratory measurement systems, and embedded data-acquisition equipment. The four-channel, simultaneous-pair format is particularly valuable when comparing a signal with its reference, sampling bridge outputs, or measuring complementary quantities from sensors and amplifiers.

PCB implementation should preserve clean analog signal paths, use a compact low-impedance layout around the converter, and decouple supply and reference nodes according to the datasheet. Differential routing must minimize mismatch and coupling to nearby switching circuits. Because this part uses a parallel interface, system-level timing and trace count should be evaluated before assigning connector pins and processor I/O.

This product page consolidates the confirmed converter architecture, package details, sourcing information, drop-in ordering variants, and practical selection guidance into one engineering-focused reference. It also identifies where a redesign should consult the full Texas Instruments datasheet rather than infer missing pin functions, acquisition timing, or electrical limits from abbreviated catalog summaries.

Drop-in alternatifler için ADS7862Y/2K — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

ADS7862Y/250

✅ Yerleştirme
📦 32-pin TQFP (PBS), 5 mm x 5 mm
Same 12-bit resolution, four differential inputs, and dual 500 kSPS conversion rate; electrical performance difference is 0%, while the ordering suffix changes reel quantity.

📋 Katalogda Olmayan Referans Alternatifi

ADS7862YB/2K

✅ Yerleştirme
📦 32-pin TQFP (PBS), 5 mm x 5 mm
Same 12-bit, 500 kSPS dual-ADC architecture and 32-pin TQFP footprint; key electrical difference is 0%, with the B ordering suffix indicating a distinct grade or device code.

📋 Katalogda Olmayan Referans Alternatifi

ADS7862Y/2K5

✅ Yerleştirme
📦 32-pin TQFP (PBS), 5 mm x 5 mm
Same 12-bit resolution, four differential channels, and dual 500 kSPS performance; electrical performance difference is 0%, with a different reel quantity indicated by the ordering suffix.

📋 Katalogda Olmayan Referans Alternatifi

ADS7862Y/2KG4

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 32-pin TQFP (PBS), 5 mm x 5 mm
Same 12-bit, 500 kSPS dual-converter family and 32-pin TQFP footprint; key electrical difference is 0%, while the G4 suffix denotes a distinct ordering configuration.

📋 Katalogda Olmayan Referans Alternatifi

ADS7862YB/250

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 32-pin TQFP (PBS), 5 mm x 5 mm
Same 12-bit resolution, four fully differential inputs, and dual 500 kSPS conversion rate; electrical performance difference is 0%, with distinct B and reel-quantity ordering codes.

📋 Katalogda Olmayan Referans Alternatifi

ADS7862Y/2K Maksimum Değerlendirmeler & Elektriksel Özellikler

ADC Type Successive-approximation ADC
Çözünürlük 12 bit
Conversion Rate 500 kSPS per ADC
Number of ADCs 2
Analog Input Channels 4 channels
Channel Organization 2 + 2 simultaneous-sampling pairs
Input Type Fully differential
Data Interface Parallel, 12-bit word access
Process Technology CMOS
Paket 32-pin TQFP (PBS), 5 mm x 5 mm
Montaj Türü Surface mount

ADS7862Y/2K 32-pin tqfp (pbs), 5 mm x 5 mm Pin Yapısı Kılavuzu

ADS7862Y/2K (32-pin tqfp (pbs), 5 mm x 5 mm paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

32-pin tqfp (pbs), 5 mm x 5 mm paket pin çizelgesi için ADS7862Y/2K

Ayrıntılı pin çıkış verisi mevcut değil: ADS7862Y/2K.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

ADS7862Y/2K için uygundur 6 uygulamas: Industrial Process Monitoring, Motor Drive Diagnostic Systems, Power Converter Feedback, Laboratory Data Acquisition, Sensor and Transducer Acquisition, Embedded Multi-Channel Control.

🏭

Industrial Process Monitoring

The ADS7862Y/2K suits industrial measurement systems that monitor two pairs of related analog signals. Its two 500 kSPS 12-bit ADC sections acquire the 2+2 channel groups simultaneously, improving timing alignment between each pair. This is useful when comparing a process variable with a feedback value, sensing a bridge output against its reference, or capturing complementary outputs from transducers. The fully differential inputs support noise-balanced signal conditioning, while the 5 mm by 5 mm TQFP package keeps the converter compact. Production designs must verify the exact input range, common-mode limits, and operating-temperature grade in the Texas Instruments datasheet.

🔧

Motor Drive Diagnostic Systems

ADS7862Y/2K can acquire paired motor-control signals such as phase current and corresponding voltage or temperature channels at up to 500 kSPS per ADC section. The simultaneous 2+2 organization helps preserve the timing relationship between signals used for control diagnostics or fault analysis. Its 12-bit resolution provides 4096 digital codes per conversion, while differential inputs can accept properly conditioned current-sense and voltage-feedback signals. In a motor-drive PCB, keep converter traces away from switching nodes, use the manufacturer input network, and validate bandwidth and settling before treating the nominal sampling rate as usable signal bandwidth.

⚡

Power Converter Feedback

The ADS7862Y/2K is appropriate for measuring paired feedback quantities in a power-converter control system. Two simultaneous-sampling pairs can capture related voltage and current information without sharing one sequentially multiplexed ADC, improving correspondence between feedback channels. Its 500 kSPS per-converter rate supports high-speed supervisory feedback, while 12-bit resolution provides 4096 code levels for software scaling. The converter still requires precise divider, current-sense, filtering, and common-mode design; differential input capability alone does not remove the need for protection around high-power switching nodes.

🖥️

Laboratory Data Acquisition

ADS7862Y/2K fits compact laboratory instruments that acquire four analog channels and need synchronized results from two differential pairs. The dual 12-bit converter architecture supports measurements involving a stimulus and response, sensor output and reference, or two axes of a slowly changing analog system. A 500 kSPS maximum conversion rate provides acquisition headroom for signal characterization, while the parallel output permits direct capture by compatible digital logic. For precision instruments, calculate noise, gain error, and nonlinearity for the complete front end rather than relying solely on the converter's nominal 12-bit resolution.

🧩

Sensor and Transducer Acquisition

The ADS7862Y/2K can digitize outputs from two differential sensor pairs when the design benefits from synchronized acquisition. Bridge, magnetic, pressure, or current transducers often produce small differential signals superimposed on a common-mode voltage; the converter's differential input architecture is compatible with suitable amplifiers and filters. With two 500 kSPS ADC sections and 12-bit codes, it can service continuous monitoring or triggered measurement tasks. Ensure the transducer output, amplifier bandwidth, input protection, and converter acquisition window form a complete settling chain so repeated sampling does not degrade effective resolution.

📱

Embedded Multi-Channel Control

ADS7862Y/2K can serve embedded controllers that must monitor four differential signals while a microcontroller or FPGA manages the acquisition system. Its 12-bit parallel interface exposes the converted word directly to digital logic, and the two-pair architecture supports paired measurements in control loops. The compact 32-pin TQFP package helps limit board area compared with larger converter packages. System designers should budget data-bus routing, account for settling time between acquisition and readback, and define interrupt or DMA behavior that prevents samples from being overwritten during sustained 500 kSPS operation.

What are the key specifications of ADS7862Y/2K that engineers should know?
The ADS7862Y/2K is a dual 12-bit successive-approximation ADC with four fully differential inputs, two 500 kSPS conversion channels, and simultaneous sampling organized as two 2-channel pairs. According to the Texas Instruments ADS7862 product page, the device uses a 12-bit parallel word-access interface and is offered in a 32-pin TQFP (PBS) package measuring 5 mm by 5 mm. Its paired architecture is the key engineering feature: each pair can capture related analog signals concurrently, helping preserve timing relationships in measurement systems.
How many channels can the ADS7862Y/2K sample simultaneously?
The ADS7862Y/2K contains four fully differential analog input channels divided into two simultaneous-sampling pairs. Texas Instruments describes the device as a dual 500 kSPS, 12-bit converter with a 2+2-channel arrangement, meaning the two internal ADC sections each handle a two-channel pair. This differs from a sequential multiplexer architecture: engineers should design paired inputs around the conversion timing of their respective ADC rather than assuming all four channels are captured in one conversion event.
What is the sampling rate of ADS7862Y/2K?
Each internal ADC in the ADS7862Y/2K can perform up to 500,000 conversions per second. According to the Texas Instruments ADS7862 product page, the converter is a dual 500 kSPS device, so the stated rate applies to each of the two ADC sections. The maximum throughput depends on valid acquisition timing, input settling, clocking, and digital-interface timing. Consult the manufacturer datasheet when using the 500 kSPS limit in a timing-critical acquisition system.
Where can I download the ADS7862Y/2K datasheet PDF?
The official ADS7862Y/2K technical information is available from the Texas Instruments product page at https://www.ti.com/product/ADS7862. The ordering information for the exact suffix is at https://www.ti.com/product/ADS7862/part-details/ADS7862Y/2K. Use the manufacturer datasheet for the complete 32-pin pin description, electrical characteristics, timing diagrams, input-reference configuration, and application circuit because abbreviated catalog pages do not provide every implementation detail.
Where can I find the ADS7862Y/2K pinout?
The ADS7862Y/2K pinout is found in the pin-configuration and pin-description sections of the Texas Instruments ADS7862 datasheet. The component uses a 32-pin TQFP (PBS) package with 5 mm by 5 mm dimensions. The official product page links directly to the family documentation, while the exact orderable part appears on the ADS7862Y/2K ordering page. Use the datasheet pin-description table when assigning PCB tracks and verifying signal, power, ground, and exposed-pad connections.
Is ADS7862Y/2K suitable for simultaneous differential measurements?
Yes, ADS7862Y/2K is specifically suited to simultaneous differential measurements because its four fully differential inputs are grouped into two pairs served by two 500 kSPS converter sections. According to the Texas Instruments ADS7862 product page, the 2+2 organization supports paired signal acquisition. It is well suited to current-versus-voltage sensing, complementary sensor outputs, amplifier outputs, and bridge measurements where timing consistency between the two signals in a pair is important.
What can replace ADS7862Y/2K without changing the PCB?
The closest drop-in choices are other ADS7862 orderable variants that retain the 32-pin TQFP (PBS) footprint, 12-bit resolution, four differential channels, and dual 500 kSPS architecture. ADS7862Y/250, ADS7862YB/2K, ADS7862Y/2K5, and ADS7862Y/2KG4 appear in family-related purchasing and cross-reference records. Before replacement, compare the exact temperature grade, reel quantity, acquisition timing, and electrical limits against the original BOM requirement; ordering-code packaging differences alone do not change the converter architecture.
ADS7862Y/2K vs ADS7862Y/250 — which one should I choose?
Both orderings identify the same ADS7862 dual 500 kSPS, 12-bit, four-channel converter family, but their ordering suffixes can encode different reel quantities or grade-related distinctions. The confirmed shared performance is 500 kSPS per ADC, 12-bit resolution, two simultaneous-sampling pairs, and a 32-pin TQFP (PBS) package. Choose according to the required incoming reel quantity, traceability, temperature grade, and assembly logistics rather than conversion performance. Check the current ordering table before treating either suffix as a universal substitute.
When should I choose ADS7862Y/2K over a sequential multi-channel ADC?
Choose ADS7862Y/2K when two related signals must be sampled concurrently within each of two differential pairs. Its two 500 kSPS successive-approximation sections avoid sequentially multiplexing all four inputs through one converter, which can improve temporal alignment between paired measurements. A sequential ADC may be appropriate when channel count, interface simplicity, or cost dominates and the signals are not time-critical. The choice should reflect the required channel-to-channel timing rather than conversion rate alone.
Is ADS7862Y/2K suitable for industrial instrumentation?
ADS7862Y/2K fits industrial instrumentation that requires four differential channels, 12-bit measurement resolution, and paired simultaneous acquisition at up to 500 kSPS per ADC. The fully differential inputs help reject common-mode noise when paired with suitable source circuits. For factory equipment, verify the exact operating-temperature grade, analog input range, reference configuration, and isolation requirements in the manufacturer datasheet before releasing the design for production.
Where can I buy ADS7862Y/2K and request current pricing?
Use the Request a Quote form on this page to request current ADS7862Y/2K pricing, stock status, and lead time. The part is a standard Texas Instruments ordering code with a 32-pin TQFP (PBS) package, so a quotation should specify the exact MPN, quantity, reel format, and assembly destination. Confirm whether any partial reels are acceptable before placing a multi-source production order.
What is the price of ADS7862Y/2K?
Current ADS7862Y/2K pricing is obtained through the Request a Quote form on this page rather than through a static price table. Quote terms can change with quantity, reel quantity, component sourcing status, and required delivery schedule. Submit the desired annual and prototype quantities, packaging requirement, and ship-to region so the returned commercial offer can be evaluated without relying on an outdated catalog amount.
What is the lead time and stock status for ADS7862Y/2K?
Request current ADS7862Y/2K stock, minimum order quantity, and lead time through the Request a Quote form on this page. The manufacturer lists the exact ADS7862Y/2K ordering code in a 32-pin TQFP (PBS) package, but production planning should use the quotation response for current availability. Include prototype, forecast, and production quantities so scheduling can reflect realistic assembly lead times.
Can ADS7862Y/2K replace ADS7862Y/2KG4?
ADS7862Y/2K and ADS7862Y/2KG4 belong to the same ADS7862 family and share the 32-pin TQFP (PBS), 12-bit, four-channel, dual-500 kSPS architecture. The G4 suffix identifies a distinct orderable version whose grade, traceability, or packaging terms must be checked against the installed design. Confirm the current ordering table and required manufacturing code before substitution, especially when production documentation or environmental qualification depends on the exact suffix.
What is the best cross-brand equivalent for ADS7862Y/2K?
No cross-brand drop-in equivalent can be confirmed from the available component information. The ADS7862Y/2K uses a specific 32-pin TQFP (PBS) arrangement with four fully differential inputs arranged as two simultaneous-sampling pairs. A converter with similar resolution and speed is not automatically interchangeable because parallel-interface timing, voltage reference, input range, pin assignment, and acquisition architecture must all match. Use the exact Texas Instruments family variants when PCB compatibility is mandatory unless a manufacturer confirms pin-for-pin equivalence.
Are ADS7862Y/2K and ADS7862Y/2K5 electrically identical?
ADS7862Y/2K and ADS7862Y/2K5 are orderable members of the same ADS7862 converter family, with the confirmed family specifications of 12-bit resolution, four fully differential inputs, two 500 kSPS ADC sections, and a 32-pin TQFP (PBS) package. The primary visible distinction is the ordering suffix, which can reflect different packing quantities or commercial conditions. Review the current ordering table for grade and reel information, and do not assume a packaging-code change introduces an electrical performance change.

Mühendislik referans verileri: ADS7862Y/2K — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose ADS7862Y/2K when the design needs two 500 kSPS, 12-bit converter sections with four fully differential inputs arranged as simultaneous-sampling pairs. It is a strong fit for paired industrial measurements, transducer monitoring, power-converter feedback, and embedded control systems where temporal correspondence between two signals matters. Select ADS7862Y/250 when its reel quantity better matches procurement; select ADS7862YB/2K when its specific device or grade code is required; and consider ADS7862Y/2K5 or ADS7862Y/2KG4 when their ordering configuration matches production needs. These family variants preserve the principal converter architecture and package, but the exact suffix must be checked for grade, packaging, and assembly requirements. Do not substitute a generic 12-bit ADC solely by resolution and speed: pin assignment, input range, reference behavior, acquisition timing, parallel-interface timing, and simultaneous-pair operation must also match.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün ADS7862Y/250 ADS7862YB/2K ADS7862Y/2K5 ADS7862Y/2KG4
Package 32-pin TQFP (PBS), 5 mm x 5 mm 32-pin TQFP (PBS), 5 mm x 5 mm 32-pin TQFP (PBS), 5 mm x 5 mm 32-pin TQFP (PBS), 5 mm x 5 mm 32-pin TQFP (PBS), 5 mm x 5 mm
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Resolution 12 bit 12 bit 12 bit 12 bit 12 bit
Conversion Rate 500 kSPS per ADC 500 kSPS per ADC 500 kSPS per ADC 500 kSPS per ADC 500 kSPS per ADC
Number of ADCs 2 2 2 2 2
Analog Input Channels 4 fully differential channels 4 fully differential channels 4 fully differential channels 4 fully differential channels 4 fully differential channels
Channel Organization 2 + 2 simultaneous-sampling pairs 2 + 2 simultaneous-sampling pairs 2 + 2 simultaneous-sampling pairs 2 + 2 simultaneous-sampling pairs 2 + 2 simultaneous-sampling pairs
Data Interface 12-bit parallel word access 12-bit parallel word access 12-bit parallel word access 12-bit parallel word access 12-bit parallel word access
Converter Architecture Successive-approximation ADC Successive-approximation ADC Successive-approximation ADC Successive-approximation ADC Successive-approximation ADC

Ana Farklılayıcılar

  • Two simultaneous-sampling converter pairs (karşılaştırma:ADS7862Y/250)
  • Compact 5 mm by 5 mm TQFP implementation (karşılaştırma:ADS7862YB/2K)
  • Parallel word-access interface for direct acquisition (karşılaştırma:ADS7862Y/2K5)
  • Same-family ordering flexibility (karşılaştırma:ADS7862Y/2KG4)

Tasarım Notları

Route each fully differential input as a tightly coupled pair, with matched input networks and symmetric component placement where practical. Keep the converter and analog traces away from switching nodes, high-current paths, clocks, and display or communication interfaces. Ground and supply return paths should be short and follow the manufacturer reference layout. Differential symmetry reduces susceptibility to common-mode pickup, but it cannot correct unequal source impedances or bandwidths in the analog front end.

Verify input settling before using the full 500 kSPS conversion capability. The acquisition network must bring each source impedance and input capacitance within the limits defined by the datasheet, and the selected amplifier must settle within the available conversion interval. For paired measurements, maintain consistent channel bandwidths and component tolerances because differences in gain, delay, and settling can reduce the benefit of simultaneous sampling. Measure the complete front end for noise and nonlinearity rather than assuming converter accuracy alone determines system accuracy.

Place input, reference, and supply decoupling components directly beside their associated package pins with short, low-inductance connections. Follow the manufacturer footprint and exposed-pad connection recommendations, including the required copper area and thermal-via pattern. The parallel interface may require a substantial number of routing resources; check board-layer capacity and escape routing for the 32-pin TQFP before committing the component placement. Keep test points accessible without extending sensitive analog traces into noisy areas.

Do not interpret the four-channel arrangement as four channels converted simultaneously. The architecture consists of two 500 kSPS converter sections, each assigned to a two-channel simultaneous-sampling pair. Confirm acquisition sequencing, conversion-result latency, and output multiplexing behavior from the timing diagrams. Also verify the exact orderable suffix when using a family alternative, because reel quantity, device code, or grade-related ordering distinctions can affect procurement and qualification even when the core converter specifications remain unchanged.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

No specific RoHS, REACH, automotive-qualification, lead-free, halogen-free, or conflict-minerals statements were identified for the exact ordering code. AEC-Q100 is not applicable because this converter is not identified as an automotive-qualified component.

Veri doğrulanma tarihi: 2026-11-18 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

ADS7862Y/2K ADS7862Y/2K datasheet ADS7862Y/2K datasheet pdf ADS7862Y/2K pinout ADS7862Y/2K equivalent ADS7862Y/2K replacement ADS7862Y/2K vs ADS7862Y/250 ADS7862Y/2K price ADS7862Y/2K stock Texas Instruments ADS7862Y/2K ADS7862 dual 500kHz ADC ADS7862 32-TQFP pinout ADS7862 simultaneous sampling application ADS7862 differential input ADC

İlgili Bileşenler ve Terimler

Texas Instruments ADS7862Y/2K ADS7862 ADS7862Y/250 ADS7862YB/2K ADS7862Y/2K5 ADS7862Y/2KG4 ADS7862YB/250 analog-to-digital converter ADC successive-approximation ADC data-converter IC semiconductor dual ADC 12-bit resolution 500 kSPS conversion rate fully differential input simultaneous sampling parallel word-access interface TQFP-32 TQFP package family surface-mount package SMD industrial process monitoring motor drive diagnostics
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle