ADSP-SC571BSWZ-3 - 300MHz SHARC DSP | Analog Devices
MPN: ADSP-SC571BSWZ-3 ✓ AktifADSP-SC571BSWZ-3 Genel Bakış
A digital signal processor is a semiconductor optimized for high-throughput mathematical operations on continuously sampled data. The ADSP-SC571 belongs to the SHARC family and extends the classic Super Harvard Architecture with SIMD-oriented signal-processing cores and an Arm control core. This DSP-to-real-time-signal-processing hierarchy combines deterministic arithmetic performance with conventional control-oriented processing in one device.
Principal features include two 300 MHz SHARC+ processor cores, an Arm Cortex-A5 core, and support for both fixed-point and floating-point arithmetic. The listed interfaces include CAN, EBI/EMI, Ethernet, DAI, I²C, MMC/SD/SDIO, SPI, SPORT, UART/USART, and USB OTG. These interfaces allow the processor to connect converters, memory, network interfaces, audio codecs, and control peripherals without requiring a separate host processor.
The ADSP-SC57x architecture is intended for intensive real-time workloads in which data must be filtered, transformed, analyzed, or decoded with deterministic timing. Its dual-SHARC configuration distributes parallel signal-processing tasks, while the Arm Cortex-A5 core can handle supervisory code, networking, control flow, and system services. The combination is particularly useful when a system must process multiple real-time streams while also supporting Ethernet-connected equipment.
Typical applications include industrial audio and communications equipment, real-time spectrum and signal analysis, communications infrastructure, industrial control, and networked embedded processing. The available peripheral mix supports designs that combine high-rate data conversion with an Ethernet management interface. Product status is listed as active, making the device suitable for ongoing industrial and communications system development.
Board design must account for the 176-pin exposed-pad package, separate 3.3 V and 1.10 V supply requirements, and high-speed signal routing. Follow the Analog Devices hardware design guide and evaluation-board layouts for power-plane geometry, exposed-pad thermal management, and interface routing. Confirm the complete pin assignment, voltage limits, clock requirements, and decoupling network against the manufacturer documentation before releasing a PCB layout.
This page consolidates the processor architecture, package characteristics, interface coverage, practical application guidance, and qualified same-package alternatives. It also identifies where a new processor selection can reuse the existing 176-lead footprint and where differences in core frequency or device configuration require additional hardware and firmware verification.
Drop-in alternatifler için ADSP-SC571BSWZ-3 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller ADSP-SC571BSWZ-3 (aynı form faktörü ve ayağa oturma) — farklı olan Maximum Clock Frequency, Package, Processor Type, Package Type, Control Core.
ADSP-SC571KSWZ-3
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ADSP-SC571BSWZ-4
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ADSP-SC571BSWZ-3 Özellikler
| Processor Type | Fixed/Floating-Point Digital Signal Processor |
| Maximum Clock Speed | 300 MHz |
| DSP Core Configuration | 2x SHARC+ cores |
| Control Core | Arm Cortex-A5 core |
| Architecture | SHARC+ dual-core with Arm Cortex-A5 |
| Arithmetic Support | Fixed-point and floating-point |
| Besleme Gerilimi | 3.3 V and 1.10 V |
| Package Type | 176-LQFP exposed-pad |
| Package Size | 24 mm x 24 mm |
| Pin Sayısı | 176 pins |
| Terminal Form | Gull wing |
| Package Shape | Square |
| İşletim Sıcaklığı Aralığı | -40°C to +85°C |
| Temperature Grade | Industrial |
| Interface Support | CAN, EBI/EMI, Ethernet, DAI, I²C, MMC/SD/SDIO, SPI, SPORT, UART/USART, USB OTG |
| Montaj Türü | Surface mount |
ADSP-SC571BSWZ-3 square Pin Yapısı Kılavuzu
ADSP-SC571BSWZ-3 (square paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: ADSP-SC571BSWZ-3.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
ADSP-SC571BSWZ-3 için uygundur 6 uygulamas: Industrial Audio Processing, Real-Time Signal Analysis, Industrial Control Systems, Communications Infrastructure, Networked Test and Measurement, Embedded Data Processing.
Industrial Audio Processing
The ADSP-SC571BSWZ-3 fits industrial audio equipment that requires parallel real-time filtering and system-level control in one processor. Its two 300 MHz SHARC+ cores can execute fixed- or floating-point signal-processing tasks, while the Arm Cortex-A5 core can manage configuration and supervisory functions. The listed DAI, SPI, SPORT, I²C, and UART/USART interfaces support audio codecs, converters, control peripherals, and diagnostics. This separation can reduce the need for a separate host processor. Confirm codec timing, supported sample rates, and clock requirements against the hardware design guide.
Önerilen
Real-Time Signal Analysis
The ADSP-SC571BSWZ-3 is appropriate for real-time spectrum analysis, filtering, and signal-decomposition systems because two 300 MHz SHARC+ cores can execute parallel arithmetic while the Arm Cortex-A5 core controls acquisition and reporting. The processor supports fixed- and floating-point arithmetic, allowing algorithms to be selected according to numerical range, resolution, and throughput requirements. Ethernet, USB OTG, UART/USART, and SPI support communication with remote consoles, storage, and converters. Firmware must schedule deterministic DSP tasks and verify latency against the acquisition system.
Önerilen
Industrial Control Systems
The ADSP-SC571BSWZ-3 can serve as the high-performance control processor in equipment combining fast-loop computation with network supervision. The two SHARC+ cores handle motion, vibration, acoustic, or other time-critical numerical loops, while the Arm Cortex-A5 core manages higher-level logic and external communications. The industrial -40°C to +85°C temperature range and listed CAN, Ethernet, SPI, UART/USART, and timer-oriented peripheral capabilities support industrial controller architectures. Power, reset, boot media, watchdog behavior, and functional-safety requirements must be addressed independently in the final system design.
Önerilen
Communications Infrastructure
The ADSP-SC571BSWZ-3 fits communications equipment that must combine real-time processing with managed network connectivity. Its SHARC+ cores can execute filtering, modulation-related computation, or other streaming algorithms, and the Arm Cortex-A5 core can support control-plane functions and Ethernet-based management. Listed CAN, Ethernet, USB OTG, UART/USART, SPI, and SD interfaces enable connection to radio hardware, service ports, and nonvolatile storage. Exact Ethernet MAC, protocol, timing, and firmware support must be confirmed for the selected board design and Analog Devices software configuration.
Önerilen
Networked Test and Measurement
The ADSP-SC571BSWZ-3 is suitable for networked measurement equipment where acquisition, mathematical processing, and remote control must operate concurrently. Two 300 MHz SHARC+ cores can process sample streams, filters, or transforms, while the Arm Cortex-A5 core can handle instrument control, Ethernet management, and user interfaces. The listed Ethernet, USB OTG, UART/USART, SPI, and storage interfaces support diverse laboratory architectures. Clock jitter, converter latency, sampling synchronization, and real-time deadline margins should be evaluated at the system level rather than inferred solely from processor clock frequency.
Önerilen
Embedded Data Processing
The ADSP-SC571BSWZ-3 supports embedded systems that process large real-time datasets without relying on a separate computational processor. Its dual SHARC+ configuration provides parallel arithmetic resources, while the Arm Cortex-A5 core executes control software and manages data movement. EBI/EMI, MMC/SD/SDIO, USB OTG, Ethernet, and SPI create options for external memory, storage, converters, and network attachments. Designers should plan memory bandwidth, cache behavior, boot support, thermal dissipation through the exposed pad, and 3.3 V versus 1.10 V rail sequencing before hardware release.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: ADSP-SC571BSWZ-3 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | ADSP-SC571KSWZ-3 | ADSP-SC571BSWZ-4 |
|---|---|---|---|
| Package | 176-LQFP exposed-pad (24x24 mm) | 176-LQFP exposed-pad (24x24 mm) | 176-LQFP exposed-pad (24x24 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Processor Type | Fixed/Floating-Point Digital Signal Processor | Fixed/Floating-Point Digital Signal Processor | Fixed/Floating-Point Digital Signal Processor |
| Clock Speed | 300 MHz | 300 MHz | 450 MHz |
| DSP Cores | 2x SHARC+ | 2x SHARC+ | 2x SHARC+ |
| Control Core | Arm Cortex-A5 | Arm Cortex-A5 | Arm Cortex-A5 |
| Interface Support | CAN, EBI/EMI, Ethernet, DAI, I²C, MMC/SD/SDIO, SPI, SPORT, UART/USART, USB OTG | CAN, EBI/EMI, Ethernet, DAI, I²C, MMC/SD/SDIO, SPI, SPORT, UART/USART, USB OTG | CAN, EBI/EMI, Ethernet, DAI, I²C, MMC/SD/SDIO, SPI, SPORT, UART/USART, USB OTG |
| Lifecycle Status | Active | Active | Active |
Ana Farklılayıcılar
- Matches the 300 MHz ADSP-SC571 family configuration (karşılaştırma:ADSP-SC571KSWZ-3)
- Lower nominal clock rate supports a different power and timing design point (karşılaştırma:ADSP-SC571BSWZ-4)
- Combines DSP execution and control processing (karşılaştırma:ADSP-SC571BSWZ-4)
Tasarım Notları
Route the exposed thermal pad to a properly designed ground or power structure using the Analog Devices hardware design guidance. The 176-lead LQFP package concentrates heat dissipation through its exposed pad, so thermal performance depends on top-side and bottom-side copper, via distribution, board thickness, enclosure airflow, and nearby heat sources. Calculate the maximum expected processor dissipation under the selected clock and peripheral load, then verify the resulting junction temperature across ambient conditions.
Implement separate, low-impedance distribution for the 3.3 V and 1.10 V rails and place their decoupling networks close to the associated power pins. Follow the manufacturer's recommended capacitor values, ESR characteristics, and placement because high-speed processors can create transient current demands during clock changes and intensive arithmetic. Validate the rail sequencing, startup behavior, and power-supply tolerance against the exact device documentation rather than copying a generic DSP power tree.
Use the manufacturer's reference layout as the basis for high-speed clock, memory, and serial-interface routing. Keep clocks away from noisy switching nodes, provide continuous return paths, and apply the documented impedance and termination rules to external memory and communication interfaces. The Arm Cortex-A5 and SHARC+ cores can interact with high-bandwidth peripherals, making signal-integrity simulation valuable when traces are long, connectors are involved, or external memories operate beyond direct board access.
Uyumluluk Bilgisi
The processor is identified as an industrial-grade component, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact MPN.