ADSP-SC573KBCZ-4 - 450MHz SHARC+ DSP | Analog Devices
MPN: ADSP-SC573KBCZ-4 ✓ AktifADSP-SC573KBCZ-4 Genel Bakış
A digital signal processor is a specialized microprocessor architecture optimized for repetitive mathematical operations on streaming data. Within the product hierarchy, this device belongs to the SHARC family of DSPs and uses the Super Harvard Architecture with single-instruction, multiple-data operation. The ADSP-SC573 also belongs to the ADSP-SC57x processor family, whose architecture combines real-time DSP execution with an Arm Cortex-A5 application processor.
According to the Analog Devices product page, the ADSP-SC573KBCZ-4 integrates dual SHARC+ processing cores with 768 KB of L1 memory and a shared 1 MB L2 cache. A listed performance figure of 720 MIPS complements the 450 MHz operating frequency. Its integrated connectivity includes DDR memory support, Gigabit Ethernet, USB, and SDIO, allowing it to manage high-bandwidth data transfer without requiring a separate network interface controller.
The fixed-point and floating-point DSP capability makes the processor suitable for real-time filtering, fast Fourier transform processing, communications waveform generation, audio analysis, and industrial control loops. The Arm Cortex-A5 core provides a conventional application-processing environment for control software, networking stacks, and supervisory tasks, while the SHARC+ cores handle computation-intensive sampling and signal-processing workloads.
Typical deployments include professional audio processing, communications infrastructure, industrial automation, radar and test equipment, and embedded systems with Ethernet or USB connectivity. Because the processor includes a 400-ball BGA footprint and DDR interfaces, it requires multilayer PCB design with controlled-impedance routing, extensive BGA fanout, and careful power-supply decoupling.
The main design constraint is package complexity. A 400-CSPBGA package is difficult to inspect after soldering, so X-ray inspection, stencil control, and land-pattern validation are important during production. The board should also provide stable, low-noise supplies because DSP clocking, DDR signaling, and high-speed Ethernet links can amplify power-integrity problems.
This page consolidates the core processor identity, package details, connectivity, comparison points, and design guidance needed to evaluate the ADSP-SC573KBCZ-4 for a new high-performance embedded control platform. It also identifies the package and pin-information limitations that must be resolved against the manufacturer documentation before layout release.
Drop-in alternatifler için ADSP-SC573KBCZ-4 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
ADSP-SC573BBCZ-4
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ADSP-SC573KBCZ-5
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
ADSP-SC573KBCZ-4 Özellikler
| Product Type | Fixed/Floating Point Digital Signal Processor |
| Processor Architecture | Dual-core SHARC+ with Arm Cortex-A5 |
| Azami Saat Hızı | 450 MHz |
| DSP Performance | 720 MIPS |
| SHARC+ Core Count | 2 |
| Application Processor | Arm Cortex-A5 |
| L1 Cache Memory | 768 KB |
| Shared L2 Cache Memory | 1 MB |
| External Memory Support | DDR |
| Ethernet Interface | Gigabit Ethernet |
| USB Interface | USB |
| Storage Interface | SDIO |
| Package Type | 400-CSPBGA, 17 x 17 mm |
| Montaj Türü | Surface Mount |
| Instruction Set | SIMD SHARC with fixed-point and floating-point operation |
| RoHS Durumu | Compliant |
ADSP-SC573KBCZ-4 400-cspbga, 17 x 17 mm Pin Yapısı Kılavuzu
ADSP-SC573KBCZ-4 (400-cspbga, 17 x 17 mm paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: ADSP-SC573KBCZ-4.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
ADSP-SC573KBCZ-4 için uygundur 6 uygulamas: Industrial Automation and Motion Control, Professional Audio and Speech Processing, Communications and Modem Baseband, Test and Measurement Instrumentation, Radar and Sensor Fusion, Industrial IoT and Edge Gateways.
Industrial Automation and Motion Control
The ADSP-SC573KBCZ-4 fits real-time industrial automation because its two SHARC+ cores can execute SIMD filtering, feedback calculations, and sensor-conditioning algorithms at a 450 MHz clock rate, while the Arm Cortex-A5 handles sequencing and communications. DDR support accommodates larger working sets, and Gigabit Ethernet enables rapid connection to supervisory systems. The 720 MIPS figure indicates substantial parallel throughput for acquisition and control tasks. A practical implementation places the processor at the center of a layered control board, with the SHARC+ cores servicing deterministic loops and the Cortex-A5 core managing data exchange over Ethernet or USB. Validate DDR timing and clock jitter on the first article because the computational headroom does not compensate for marginal power integrity.
Önerilen
Professional Audio and Speech Processing
The ADSP-SC573KBCZ-4 is suitable for multichannel audio, speech, and acoustic-processing platforms because its dual SHARC+ cores can perform fixed-point and floating-point filtering in parallel at 450 MHz. The 768 KB L1 and 1 MB shared L2 structure support short audio buffers and time-domain processing, while the Arm Cortex-A5 core can run control software and network-facing tasks. Use DDR for longer recordings and Gigabit Ethernet for streaming to a host or workstation. Compared with a conventional microcontroller, the SIMD architecture increases the number of samples processed per instruction and reduces the computation required for transforms, equalization, and noise reduction.
Önerilen
Communications and Modem Baseband
The ADSP-SC573KBCZ-4 supports communications baseband and signal-processing designs that combine deterministic DSP with a networked control environment. The two SHARC+ cores provide 720 MIPS of advertised throughput for filtering, modulation, spectral analysis, and packet-buffer processing at 450 MHz. DDR support is valuable for wideband waveforms and protocol stacks, while Gigabit Ethernet, USB, and SDIO provide several paths for host connectivity. Partition the software so deterministic sampling and filtering remain on the SHARC+ cores while the Cortex-A5 core handles configuration and non-real-time traffic. Confirm DDR memory timing and interrupt latency during system integration, because sustained throughput depends on both computation and memory bandwidth.
Önerilen
Test and Measurement Instrumentation
The ADSP-SC573KBCZ-4 is appropriate for signal-analysis and measurement instruments where high-rate sampling, real-time transforms, and high-speed data transfer must coexist in one processor. Its SHARC+ cores can accelerate filtering, correlation, and frequency-domain operations, while the Cortex-A5 core supports the user interface, instrument control, and file management. The 1 MB shared L2 cache and DDR interface help separate active processing from bulk transfer, and Gigabit Ethernet can accelerate export of measurement results. A sound design separates analog acquisition from digital processing, then uses controlled-impedance routing for clocks and DDR. Validate sustained acquisition rates against memory bandwidth rather than relying only on the 450 MHz core frequency.
Önerilen
Radar and Sensor Fusion
The ADSP-SC573KBCZ-4 suits radar, acoustic-sensing, and sensor-fusion systems that require parallel filtering and real-time data reduction. Two SHARC+ cores operating at 450 MHz can support independent signal chains or coordinated SIMD transforms, while the Arm Cortex-A5 core handles higher-level state management and communication. SDR interfaces are also enabled through DDR, Gigabit Ethernet, USB, and SDIO, allowing the processor to accept sensor data and send reduced results to a higher-level controller. For multi-channel radar, place each acquisition path close to its converter and keep DDR routing constrained to reduce timing margin loss. The processor's arithmetic capability supports the algorithm, but synchronization accuracy still depends on clock distribution and deterministic interrupt design.
Önerilen
Industrial IoT and Edge Gateways
The ADSP-SC573KBCZ-4 can serve as an edge-computing gateway when local signal processing must occur close to sensors or actuators. Its 450 MHz dual-SHARC+ configuration handles filtering and feature extraction without first transferring every raw sample over the network, and the Cortex-A5 core supports protocol management and secure device control functions. DDR accommodates buffered sensor history, while Gigabit Ethernet, USB, and SDIO enable diverse peripheral connections. A practical partition runs low-latency sampling on the SHARC+ side and publishes summarized data over Ethernet. This architecture reduces host-network traffic and improves response time. Ensure the enclosure has adequate thermal paths because sustained DSP and DDR activity can create a thermal ceiling independent of the processor's headline frequency.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: ADSP-SC573KBCZ-4 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | ADSP-SC573BBCZ-4 | ADSP-SC573KBCZ-5 |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 400-CSPBGA, 17 x 17 mm | 400-CSPBGA | 400-CSPBGA |
| Processing Architecture | Dual-core SHARC+ with Arm Cortex-A5 | ADSP-SC573 family | ADSP-SC573 family |
| Instruction Set | SIMD SHARC with fixed-point and floating-point operation | ADSP-SC573 family architecture | ADSP-SC573 family architecture |
Ana Farklılayıcılar
- Heterogeneous dual-core architecture (karşılaştırma:ADSP-SC573BBCZ-4)
- Integrated high-speed connectivity (karşılaştırma:ADSP-SC573KBCZ-5)
- Dedicated cache hierarchy for mixed workloads (karşılaştırma:ADSP-SC573BBCZ-4)
- SIMD fixed-point and floating-point throughput (karşılaştırma:ADSP-SC573KBCZ-5)
Tasarım Notları
Treat the 400-CSPBGA land pattern as a high-density routing problem. Follow the manufacturer pin-description and ball-assignment tables exactly, define a complete power-and-ground plane strategy, and reserve escape routing for DDR and high-speed interfaces. A multilayer stack-up is required in practice for controlled-impedance clocks, DDR routing, and adequate power delivery. Validate the design with the manufacturer's EZ-KIT schematic and design files before releasing the first layout.
Separate the processor's core, I/O, DDR, and peripheral supply requirements according to the manufacturer power-supply design guidance. Place local high-frequency decoupling directly at the relevant power balls and keep supply and ground connections short through the BGA breakout. DDR reference voltage and clock distributions require dedicated attention because excess supply noise or jitter can undermine the nominal 450 MHz operating point even when the logic design is correct.
A 400-ball BGA offers substantial electrical connectivity but limited top-side heat-removal access. Estimate dissipation from measured core, DDR, and I/O activity, then use the manufacturer thermal model to select PCB copper area, thermal vias, and airflow. Do not use the 720 MIPS figure as a thermal rating; sustained utilization depends on the instruction mix and memory traffic. Perform board-level thermal testing with the intended processor package and enclosure.
Route DDR and Gigabit Ethernet signals as controlled-impedance interconnects with continuous reference planes and via matching. Keep clocks away from high-current switching nodes and terminate interfaces according to the manufacturer reference design. The ADSP-SC573 EZ-KIT board schematic is a useful starting point for identifying power, clock, and signal-routing relationships, but the final layout must be adapted to the target stack-up and enclosure.
Do not treat similarly suffixed ADSP-SC573 order codes as interchangeable without checking the complete ordering guide. Confirm ball assignments, supply rails, clock limits, temperature grade, memory initialization, peripheral multiplexing, and driver support. Also verify that the board supports BGA assembly inspection requirements; a 400-CSPBGA package cannot be visually inspected for solder-joint defects in the same way as a leaded package.
Uyumluluk Bilgisi
RoHS compliance is identified in the LCSC product listing. Additional environmental, automotive, and material-compliance declarations require confirmation from the manufacturer.