ADV7280WBCPZ-RL - 10-Bit 4x Oversampled SDTV Video Decoder | Analog Devices
MPN: ADV7280WBCPZ-RL ✓ AktifADV7280WBCPZ-RL Genel Bakış
A video decoder is an interface IC that sits between an analog video source - camera, CCTV DVR, set-top box analog front end or legacy broadcast chain - and a digital processor. In the product taxonomy it belongs to video interface ICs, a sub-class of interface ICs, which in turn are integrated circuits dedicated to moving and conditioning data between a sensor or source and a host processor. The decoder's job is sampling the analog waveform with adequate resolution and timing recovery, then serializing the result into a standard digital stream the host can consume.
Key features of the ADV7280 family include automatic format detection without host intervention, a 10-bit ADC that delivers more headroom than 8-bit converters for color rendition and gradient smoothness, 4x oversampling that places analog Nyquist filtering and anti-alias behavior on-chip, and a line-locked clock (LLC) output plus horizontal and vertical synchronization outputs for downstream framing. The serial output is the standard ITU-R BT.656 format, so existing BT.656-capable SoCs, FPGAs and USB capture engines can be connected with minimal glue logic.
Technically the device combines a differential-to-single-ended input stage, a 10-bit successive-approximation style ADC, an automatic gain control and chroma decoding path, a comb filter and motion-adaptive deinterlacer, and a digital output formatter. Because deinterlacing is performed on-chip, the host processor does not need field buffers, which reduces both system cost and software complexity. The part is designed for industrial temperature operation, and the family includes a portable/MIPI-oriented variant alongside the standard parallel BT.656 device described here.
Typical uses include CCTV and security camera DVR front ends, video capture cards for PC and industrial PC systems, industrial vision equipment, professional and consumer broadcast and video-conferencing hardware, and automotive or industrial video-distribution modules that ingest legacy composite video while an FPGA or SoC performs scaling and encoding.
A key design consideration is that the analog input stage determines image quality: correct termination, chroma and sync separation, and an unobstructed ground return to the composite or S-Video source matter as much as the converter itself. Place the analog traces short and away from high-speed digital and switching-supply nodes, keep the exposed pad solidly tied to ground with a solid thermal-via array, and follow the reference layout in the manufacturer datasheet for the crystal/clock and power-supply sections.
This page consolidates manufacturer and distributor information into a single engineering view: verified specification summary, a package and footprint reference, pin-level design notes, drop-in and near-drop-in replacement options with quantified differences, and application guidance that goes beyond the headline data sheet entries.
Drop-in alternatifler için ADV7280WBCPZ-RL — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
ADV7280WBCPZ
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ADV7280A
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
ADV7280WBCPZ-RL Özellikler
| Device Type | Multiformat analog video decoder with deinterlacer |
| ADC Resolution | 10 bit |
| Oversampling Rate | 4x oversampled |
| Supported Video Standards | NTSC, PAL, SECAM (automatic detection) |
| Input Formats | Composite and S-Video analog baseband |
| Digital Output Format | ITU-R BT.656 |
| Host Interface | I2C control |
| Synchronization Outputs | LLC (line-locked clock), HS, VS/FIELD/SFL |
| Paket | 32-lead LFCSP (5 mm x 5 mm) with exposed pad |
| Number of Terminals | 32 |
| Package Type | CSP (LFCSP), Tape & Reel (TR) |
| Montaj Stili | Surface mount |
| İşletim Sıcaklığı Aralığı | -40 °C to +105 °C |
| Part Status | Active |
| RoHS Durumu | Compliant |
| REACH Status | Compliant |
| JESD-609 (e3) Code | e3 |
| Deinterlacer Type | On-chip motion-adaptive deinterlacer |
ADV7280WBCPZ-RL csp (lfcsp), tape & reel (tr) Pin Yapısı Kılavuzu
ADV7280WBCPZ-RL (csp (lfcsp), tape & reel (tr) paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: ADV7280WBCPZ-RL.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
ADV7280WBCPZ-RL için uygundur 6 uygulamas: CCTV Camera and DVR Video Input Front End, Industrial Video Inspection and Machine Vision, USB Desktop and Industrial PC Video Capture, Video Conference and Videoconferencing Endpoint, Professional Broadcast and Video Distribution Infrastructure, Automotive and Industrial Vehicle Camera Retrofit Modules.
CCTV Camera and DVR Video Input Front End
The ADV7280WBCPZ-RL suits the analog stage of a CCTV camera or DVR because it takes composite or S-Video directly from the coax line and produces a digital BT.656 stream with no host-side format configuration. Automatic NTSC/PAL/SECAM detection removes the regional standard setting that usually forces field support for a single decoder model, and the 10-bit ADC preserves more chroma detail than an 8-bit path, which matters for low-light scenes where the composite signal is already amplitude-limited. The on-chip deinterlacer means the DVR's host processor does not need field buffers or a software comb pass. The tradeoff is that the composite signal still has to arrive on a clean, well-terminated analog trace, so layout discipline matters more than any host-side correction.
Önerilen
Industrial Video Inspection and Machine Vision
Factory inspection cells often still receive analog composite video from legacy cameras, and the ADV7280WBCPZ-RL converts that source into a digital stream an FPGA or industrial PC can process for edge detection and measurement. The 4x oversampled 10-bit converter places analog anti-alias filtering on-chip, so the external input network stays simple and the resulting digitisation is less sensitive to noise pickup than a low-resolution path. Operating from -40 °C to +105 °C supports unheated enclosures and cabinets near process equipment. Because the deinterlacer runs inside the part, a frame grabber can accept the output directly, freeing host resources for measurement algorithms.
Önerilen
USB Desktop and Industrial PC Video Capture
For a USB capture card, the ADV7280WBCPZ-RL is the natural analogue-to-digital stage in front of a USB capture controller: it converts composite or S-Video into BT.656 with a line-locked clock, and the controller streams frames to the host over USB. The 10-bit ADC gives the capture path more tonal headroom than a typical 8-bit converter, which reduces visible banding on gradients and improves colour reproduction for streaming and conferencing use. On-chip deinterlacing also cuts host CPU usage and latency. Where a single board must accept a camera, a game console or a legacy AV source, the automatic format detection removes per-source jumper or firmware configuration.
Önerilen
Video Conference and Videoconferencing Endpoint
Videoconferencing endpoints and camera modules that still ingest composite or S-Video benefit from the ADV7280WBCPZ-RL because the decoder outputs a standard BT.656 stream that any ISP or SoC can consume, and it adds no switching noise of its own. The 10-bit, 4x oversampled front end cleans up the signal before the host encoder, which matters when the link budget is tight and re-encoding artifacts would otherwise be amplified. On-chip deinterlacing keeps the pipeline short and reduces the frame latency that users perceive in a call. The main design consideration is to keep the analog section physically separate from the host's high-speed digital and power-switching regions.
Önerilen
Professional Broadcast and Video Distribution Infrastructure
In broadcast and video-distribution racks where legacy composite feeds still arrive alongside digital sources, the ADV7280WBCPZ-RL provides a compact conversion path into a common digital backbone. Its 10-bit converter produces a more accurate digitisation of composite than an 8-bit decoder, which matters when the material is re-encoded at high bit rates, and the automatic NTSC/PAL/SECAM detection supports mixed-region feeds without operator intervention. The on-chip deinterlacer reduces the frame-processing burden on the frame synchroniser and scaler downstream. In a multi-channel frame, the small 5 mm x 5 mm LFCSP footprint allows several decoders to fit behind a single rack unit, provided the exposed pad has adequate copper and thermal vias.
Önerilen
Automotive and Industrial Vehicle Camera Retrofit Modules
Retrofit camera modules that must accept an analogue composite feed into a modern domain controller can use the ADV7280WBCPZ-RL as the conversion stage ahead of an automotive Ethernet or LVDS link. The -40 °C to +105 °C industrial temperature range covers the typical vehicle cabin and external camera housing envelope, and the surface-mount LFCSP package suits automated assembly. The 10-bit conversion preserves more image detail before the module's encoder compresses the stream, which directly improves picture quality at low bit rates. Because the decoder is a linear part with no switching regulator, it adds no switching hash to the analog input; the design focus is instead on protecting the composite trace from the module's noisy power environment.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: ADV7280WBCPZ-RL — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | ADV7280WBCPZ | ADV7280A |
|---|---|---|---|
| Package | 32-LFCSP (5 mm x 5 mm) with exposed pad | 32-LFCSP (5 mm x 5 mm) with exposed pad - identical | 32-LFCSP (5 mm x 5 mm) with exposed pad - identical |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Device Type | Multiformat analog video decoder with on-chip deinterlacer | Same device, alternate packaging code | Same device with revised silicon revision ID and crystal circuit |
| ADC Resolution | 10 bit | 10 bit | 10 bit |
| Oversampling | 4x oversampled | 4x oversampled | 4x oversampled |
| Supported Standards | NTSC, PAL, SECAM with automatic detection | NTSC, PAL, SECAM with automatic detection | NTSC, PAL, SECAM with automatic detection |
| Digital Output Interface | ITU-R BT.656 parallel data with LLC, HS and VS/FIELD/SFL | ITU-R BT.656 parallel data with LLC, HS and VS/FIELD/SFL | ITU-R BT.656 parallel data with LLC, HS and VS/FIELD/SFL |
| Host Control Interface | I2C | I2C | I2C |
| Deinterlacer | On-chip, motion-adaptive | On-chip, motion-adaptive | On-chip, motion-adaptive |
| Crystal / Clock Support | Internal oscillator with crystal support per the ADV7280 datasheet | Internal oscillator with crystal support per the ADV7280 datasheet | Enhanced external crystal oscillator support, requires an additional crystal-circuit resistor |
| Operating Temperature Range | -40 °C to +105 °C (industrial) | -40 °C to +105 °C (industrial) | -40 °C to +105 °C (industrial) |
| Pin Compatibility | Baseline 32-terminal LFCSP assignment | Pin-to-pin identical, 100% match | Same pinout, software compatible, 90% match |
Ana Farklılayıcılar
- Complete multiformat front end in one device, with no host configuration of video standard (karşılaştırma:ADV7280WBCPZ)
- Pin-to-pin identical behaviour enables drop-in substitution between orderable codes (karşılaştırma:ADV7280WBCPZ)
- Revised crystal circuit in the newer silicon for external crystal oscillators (karşılaştırma:ADV7280WBCPZ)
- 10-bit conversion with 4x oversampling versus 8-bit class decoders (karşılaştırma:ADV7280A)
Tasarım Notları
Composite and S-Video are amplitude-modulated carriers with sync and chroma information in the frequency domain, so the analog input section is the most noise-sensitive part of the board. Route the video inputs as short, direct traces over a continuous ground plane, keep them away from switching regulator outputs, inductors and high-speed digital nets, and provide an uninterrupted ground return path from the source connector to the device. Use the recommended termination and coupling network values from the manufacturer datasheet reference design rather than generic values; incorrect input attenuation or missing termination is a common cause of poor chroma and sync errors that look like decoder faults.
The decoder mixes a precision 10-bit ADC, a deinterlacer and a digital output formatter, so supply quality directly affects the conversion. Provide clean analogue and digital supplies as recommended in the datasheet, place bulk and high-frequency decoupling capacitors at the package pins rather than at the power entry point, and keep the switching supply's hot loop away from the device ground reference. Because there is no internal switching regulator in this part, supply-induced noise reaches the converter unattenuated, unlike in a mixed-signal part with an integrated regulator.
Estimated: with a 3.3 V analog and 1.8 V digital supply split across the package, a practical consumption of roughly 200 mW to 400 mW total is typical for a 10-bit 4x oversampled decoder with on-chip deinterlacing. At 300 mW the heat is modest, but the 5 mm x 5 mm LFCSP conducts mostly through the exposed pad, so the thermal path is the pad. Tie the exposed pad to a solid ground pour with a via array inside the pad footprint; in an enclosed camera housing with no airflow, verify the case temperature margin using the maximum ambient plus the estimated dissipation.
Three mistakes recur in designs using this decoder family. First, omitting the crystal or clock network or mis-sizing the load capacitors, which destabilises the sampling clock and corrupts the line-locked clock output. Second, assuming the digital output is self-synchronising: BT.656 data must be taken in step with the LLC signal, so route the clock and data with matched length and keep them away from the analog section. Third, expecting the part to handle composite video that has already been amplified or attenuated by an uncompensated distribution stage, which pushes the input outside the linear range and shows up as a crushed sync level rather than a decoder error.
Uyumluluk Bilgisi
RoHS compliance and REACH status are reported for this orderable part in third-party component comparison data, and the JESD-609 assembly code is e3 (RoHS-compliant lead-free termination). AEC-Q100 qualification, halogen-free status and conflict-minerals reporting are not stated for this part; confirm with the manufacturer if your application requires them.