AKM (Asahi Kasei Microdevices)

AK4205EN - Stereo Headphone Amp, 36-QFN | Asahi Kasei

MPN: AK4205EN ✓ Aktif
4.5 V to 6.5 V Vdss 36-QFN (5 x 5 mm) Package
MOQ: 1 |

AK4205EN Genel Bakış

The Asahi Kasei Microdevices AK4205EN is a stereo headphone amplifier interface designed for high-resolution mobile audio, with a 36-QFN 5 x 5 mm package and a 4.5 V to 6.5 V supply range. It combines a built-in analog switch, ultra-low-noise operation, and exceptional signal purity, including a specified THD+N of -118 dB.

A headphone amplifier is a specialized audio interface IC that accepts left and right analog signals, provides the voltage gain and output drive required by stereo headphones, and can include switching functions for shared audio paths. Within the semiconductor hierarchy, the AK4205EN belongs to the interface IC family within integrated circuits and audio signal-chain devices. Its built-in analog switch helps reduce the need for separate routing hardware in compact mobile equipment.

The AK4205EN's principal features include stereo headphone output, a 4.5 V to 6.5 V operating supply range, a 36-WFQFN exposed-pad package measuring 5 x 5 mm, and THD+N of -118 dB. The built-in analog switch is a particularly useful integration feature for portable devices that must route audio among internal playback, headset, or external-accessory paths while maintaining a compact component count.

From an architectural perspective, the device is designed around low-noise, low-distortion signal handling for Hi-Fi mobile applications. The -118 dB THD+N figure indicates that the manufacturer emphasizes high-fidelity reproduction rather than basic playback capability. Because the AK4205EN includes both headphone amplification and analog switching, PCB design must treat the audio signal path, supply connections, exposed pad, and switching-control nets as a single integrated analog subsystem.

Typical uses include high-resolution mobile phones, portable music players, digital audio players, compact headphones, and battery-powered consumer devices. Its 36-QFN format supports space-constrained designs, while the low-distortion target benefits portable equipment intended to reproduce subtle high-frequency and low-level audio content. The integrated analog switch may also simplify designs requiring a managed transition between playback and headset connections.

Careful PCB implementation is essential because a 5 x 5 mm QFN leaves limited clearance between pads and the exposed thermal pad. Place input, output, supply, and ground connections according to the manufacturer pin-description table, maintain short analog traces, provide local supply bypassing, and connect the exposed pad to the intended ground or thermal plane. Confirm the exact exposed-pad connection and recommended decoupling network in the manufacturer datasheet before release to production.

This product record combines the AK4205EN's verified package, voltage, distortion, and switching characteristics with application-oriented implementation guidance. It also identifies the scarcity of qualified same-footprint drop-in replacements, helping engineers distinguish a true production substitution from a merely similar headphone-amplifier product that would require different routing, pin assignment, or board-level redesign.

Drop-in alternatifler için AK4205EN — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

AK4205

✅ Yerleştirme
📦 36-QFN (5 x 5 mm)
AK4205 is the family-level base designation; voltage, distortion, and switching ratings are not separately stated, so the match is treated as the nearest same-family candidate pending suffix-level validation

📋 Katalogda Olmayan Referans Alternatifi

AK4205EN Özellikler

Device Type Stereo headphone amplifier interface
Number of Channels 2 channels
Supply Voltage Range 4.5 V to 6.5 V
THD+N -118 dB
Built-In Analog Switch Yes
Target Application High-resolution Hi-Fi mobile audio
Paket 36-QFN (5 x 5 mm)
Package Type 36-WFQFN exposed-pad package
Montaj Türü Surface mount
RoHS Durumu Compliant

AK4205EN 36-wfqfn exposed-pad package Pin Yapısı Kılavuzu

AK4205EN (36-wfqfn exposed-pad package paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

36-wfqfn exposed-pad package paket pin çizelgesi için AK4205EN

Ayrıntılı pin çıkış verisi mevcut değil: AK4205EN.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

AK4205EN için uygundur 6 uygulamas: High-Resolution Mobile Phone Audio, Portable Digital Audio Player, Battery-Powered Headphone Output, Compact Stereo Headset Interface, High-Fidelity Mobile Audio Platform, Analog Switch-Integrated Audio Routing.

📱

High-Resolution Mobile Phone Audio

The AK4205EN fits high-resolution mobile-phone audio because it combines a two-channel headphone amplifier with a built-in analog switch in a 36-QFN 5 x 5 mm package. Its specified THD+N of -118 dB supports low-distortion playback, while the 4.5 V to 6.5 V operating range aligns with common portable-device rails. Place the device near the headphone connector and switching components, keep input and output routes short, and follow the recommended bypass network. The integrated switch can reduce external routing hardware when the system must move between internal playback and headset signals, although switching timing and insertion behavior must be checked before final signal-path design.

🎧

Portable Digital Audio Player

The AK4205EN is appropriate for a portable digital audio player that prioritizes clean headphone output without allocating substantial board area to a separate analog switch. The 36-QFN package measures 5 x 5 mm, and the integrated stereo topology supports left and right headphone channels. Its -118 dB THD+N specification is useful for preserving low-level musical detail, while operation from 4.5 V to 6.5 V supports portable supply architectures. Designers should verify output swing and drive against the selected headphone impedance, decouple the supply locally, and route the analog return through a quiet reference plane to avoid injecting switch and charger noise into the audio path.

🔋

Battery-Powered Headphone Output

The AK4205EN can support battery-powered headphone outputs when the available rail is within its 4.5 V to 6.5 V operating range. The integrated analog switch is useful in battery-powered products that share an audio path between internal sources and a headset connection, while the 36-QFN format limits board footprint. The low -118 dB THD+N target supports high-fidelity listening without changing the physical design for a larger analog package. Validate current draw in every operating mode, check startup behavior when the supply crosses the valid range, and use the manufacturer's recommended input, output, and supply capacitances to maintain stable low-noise operation.

🎧

Compact Stereo Headset Interface

The AK4205EN is well matched to compact stereo headset interfaces that require low distortion and integrated signal routing. Its two-channel amplifier arrangement supports conventional left and right headphones, and the built-in analog switch can simplify control of headset-related paths. The 5 x 5 mm 36-QFN package enables dense placement near a connector, although exposed-pad layout and assembly process control remain important. Confirm output impedance, maximum output voltage, and the switch's effect on idle-channel behavior against the intended headset. Keep the headphone outputs away from high-current charging paths and use a continuous ground reference to reduce noise and pop during mode transitions.

📱

High-Fidelity Mobile Audio Platform

The AK4205EN can serve as the headphone-output stage of a high-fidelity mobile audio platform built around a premium converter. The -118 dB THD+N specification preserves low-level detail after digital-to-analog conversion, while the integrated analog switch helps manage source routing. Its 36-QFN package allows placement close to the converter and connector, reducing sensitive analog trace length. The 4.5 V to 6.5 V supply range must remain valid under every audio mode and battery condition. System designers should also confirm channel synchronization, mute timing, switch click performance, and ground separation because those system-level details can influence the final listening experience.

🔧

Analog Switch-Integrated Audio Routing

The AK4205EN is useful where an audio design needs both headphone amplification and local analog routing in one compact device. Its built-in analog switch reduces the need for separate routing logic near the headphone output, while the stereo amplifier supports conventional two-channel listening. The device's 36-QFN 5 x 5 mm package preserves board area, and its -118 dB THD+N specification maintains low distortion through the shared path. Use the manufacturer switch configuration to establish control polarity and signal direction, avoid placing noisy digital nets beside the audio inputs, and test mode transitions for clicks, pops, and off-channel attenuation. The switch should not be assumed to be a substitute for a general-purpose high-voltage multiplexer.

Önerilen Ürünler Özeti

AK4205EN AKM (Asahi Kasei Microdevices) Kullanıldığı Yer: High-Resolution Mobile Phone Audio, Portable Digital Audio Player, Battery-Powered Headphone Output, Compact Stereo Headset Interface, High-Fidelity Mobile Audio Platform, Analog Switch-Integrated Audio Routing AK4492 High-resolution audio converter family referenced with the AK4205 Kullanıldığı Yer: High-Resolution Mobile Phone Audio, Battery-Powered Headphone Output, High-Fidelity Mobile Audio Platform AK4205 AK4205 family headphone amplifier Kullanıldığı Yer: Portable Digital Audio Player, Compact Stereo Headset Interface, Analog Switch-Integrated Audio Routing
What is the AK4205EN?
The AK4205EN is a two-channel stereo headphone amplifier interface from Asahi Kasei Microdevices with a built-in analog switch. According to the manufacturer datasheet, it is intended for high-resolution Hi-Fi mobile equipment and specifies THD+N of -118 dB. The device operates from a 4.5 V to 6.5 V supply and is packaged in a 36-QFN measuring 5 x 5 mm.
What are the key specifications of AK4205EN?
The AK4205EN provides stereo headphone amplification, an integrated analog switch, a 4.5 V to 6.5 V supply range, and THD+N of -118 dB in a 36-QFN 5 x 5 mm package. According to the manufacturer datasheet, these characteristics position the device for high-resolution mobile audio. Output impedance, gain settings, noise voltage, and temperature limits should be taken from the electrical-characteristics table for the final design.
Where can I download the AK4205EN datasheet PDF?
The AK4205EN datasheet PDF is available from the manufacturer-datasheet listing provided on this page. It describes the AK4205 as a stereo headphone amplifier for high-resolution mobile audio, including its built-in analog switch and -118 dB THD+N specification. Use the pin-description and application sections when assigning PCB tracks and selecting the exposed-pad connection.
Where is the AK4205EN pinout located?
The AK4205EN pinout is located in the pin-description section of the manufacturer datasheet. The component uses a 36-QFN package, so pin numbers must be checked directly against the exposed-pad drawing before PCB routing. The package diagram library does not contain a dedicated 36-pin QFN key, and a complete pin list is therefore not reproduced on this page.
What is the supply voltage of the AK4205EN?
The AK4205EN operates from 4.5 V to 6.5 V, as specified in the manufacturer datasheet and the AK4205EN technical listing. A system rail within that interval is therefore necessary. Keep the analog and power-supply routing compact, and use the datasheet's recommended bypass-capacitor values and layout to preserve the device's low-noise and low-distortion behavior.
What is the AK4205EN THD+N specification?
The AK4205EN specifies THD+N of -118 dB, according to the manufacturer datasheet. This very low total harmonic distortion plus noise value targets high-fidelity mobile playback rather than merely functional headphone drive. Actual system performance also depends on the selected gain, load impedance, supply condition, output network, PCB grounding, and the quality of the connected headphones.
What applications are suitable for the AK4205EN?
The AK4205EN is suitable for high-resolution mobile phones, portable music players, digital audio players, and compact stereo headsets. Its integrated analog switch can simplify audio-path routing in space-constrained equipment, while the 36-QFN package supports dense layouts. Confirm headphone impedance, output swing, gain configuration, and switch-control requirements before assigning the device to a product.
How is the AK4205EN package implemented on a PCB?
The AK4205EN should be implemented as a 36-QFN surface-mount device with its exposed pad connected according to the manufacturer datasheet. Place bypass capacitors and audio-path components close to their associated pins, maintain short return paths, and keep switching and digital-control traces away from sensitive audio inputs. The 5 x 5 mm footprint also requires careful assembly-process planning.
Does the AK4205EN include an analog switch?
Yes, the AK4205EN includes a built-in analog switch for integrated audio-path control. The manufacturer describes the part as a stereo headphone amplifier with an analog switch intended for high-resolution Hi-Fi mobile equipment. The exact switch topology, control logic, insertion performance, and allowed signal levels should be verified in the pin and electrical-characteristics tables before layout release.
What is the best drop-in replacement for the AK4205EN?
No independently qualified drop-in replacement for the AK4205EN is established by the available replacement information. The AK4205 family designation appears in the same 36-QFN product listing, but a family name alone does not prove an identical pinout, exposed-pad arrangement, gain configuration, and switching function. Any substitution must therefore undergo a manufacturer pin-by-pin and application-level review before being called drop-in compatible.
What can replace the AK4205EN on an existing PCB?
A device can replace the AK4205EN on an existing PCB only if it uses the same 36-QFN land pattern and reproduces the required power, ground, analog input, headphone output, and switch-control functions. No such candidate is confirmed here. Check the exposed pad, switching logic, gain configuration, output drive, and recommended layout against the manufacturer datasheet before authorizing a replacement.
AK4205EN versus AK4205: can one replace the other?
The AK4205 is the family designation associated with the AK4205EN 36-QFN listing, but the EN suffix identifies the ordered package or ordering configuration and should not be ignored. Because a full ordering table and suffix comparison are not established, the AK4205 cannot automatically be declared a drop-in replacement. Verify the exact package code, pin assignment, temperature grade, and tape-and-reel configuration.
When should I choose the AK4205EN for a mobile audio design?
Choose the AK4205EN when a compact design needs low-distortion stereo headphone drive, a 4.5 V to 6.5 V supply, and integrated analog switching. Its -118 dB THD+N target and 36-QFN 5 x 5 mm package are particularly relevant to high-resolution mobile equipment. Select it only after confirming headphone compatibility, output swing, gain options, switch timing, and exposed-pad requirements.
Is the AK4205EN suitable for battery-powered headphones?
The AK4205EN is suitable for battery-powered mobile audio when the system supply remains within 4.5 V to 6.5 V and the headphone load is electrically compatible. Its stereo topology and integrated analog switch can simplify portable equipment, while the -118 dB THD+N target supports high-fidelity playback. Power-consumption and battery-life calculations require the operating current under the selected mode and load.
Where can I request a quote and current lead time for the AK4205EN?
Use the Request a Quote form on this page to request current AK4205EN pricing, stock status, minimum order quantity, and lead time. Current commercial terms can change independently of the technical specifications, so confirm each quotation against the exact AK4205EN ordering code, 36-QFN package, and required delivery quantity. The form is the appropriate route for a production purchasing decision.

Mühendislik referans verileri: AK4205EN — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the AK4205EN when a portable or compact audio product needs a two-channel headphone amplifier, integrated analog switching, and a defined 36-QFN 5 x 5 mm implementation. Its 4.5 V to 6.5 V supply range and -118 dB THD+N target align well with high-resolution mobile equipment, provided the output stage is compatible with the selected headphone impedance. The AK4205 family designation is the nearest same-family option identified, but it should be treated as a candidate rather than an automatic replacement until suffix-level ordering and pin information are checked. No independently verified cross-brand 36-QFN drop-in substitute is established, so engineers should not substitute a generic headphone amplifier based on package dimensions alone. For an existing board, review the AK4205EN pin description, exposed-pad connection, switch-control logic, gain configuration, output drive, and recommended capacitors before making a component change.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün AK4205
Brand Asahi Kasei Microdevices Asahi Kasei Microdevices
Package 36-QFN (5 x 5 mm) 36-QFN (5 x 5 mm)
Device Type Stereo headphone amplifier interface Stereo headphone amplifier

Ana Farklılayıcılar

  • Integrated analog switching reduces adjacent routing hardware (karşılaştırma:AK4205)
  • High-resolution audio signal-performance target (karşılaştırma:AK4205)
  • Compact package integration for portable equipment (karşılaştırma:AK4205)

Tasarım Notları

Route the AK4205EN analog inputs and headphone outputs as short, direct paths, and place the input, output, and bypass capacitors close to the pins identified in the manufacturer pin-description table. The 36-QFN 5 x 5 mm footprint provides little routing room around the exposed pad, so finalize stackup and assembly constraints before placing sensitive traces. Keep charger-switching, display, and high-current return paths away from the audio input references.

Use the exposed-pad connection specified by the manufacturer and provide a low-impedance copper path beneath the device. Avoid cutting thermal or return-current paths through the pad region, and connect analog ground to the system reference strategy appropriate for the complete product. Inspect the recommended layout and grounding configuration in the datasheet before release, because changing pad connections can compromise noise and distortion performance.

Do not treat the AK4205 and AK4205EN designations as automatically interchangeable without checking the suffix, package code, pin table, exposed-pad connection, temperature grade, and ordering format. Similarly, a 36-QFN headphone amplifier from another manufacturer is not a drop-in substitute merely because its outline matches. Verify every signal, supply, control, and exposed-pad connection, then validate output swing and headphone-load compatibility on hardware.

The AK4205EN's -118 dB THD+N target makes quiet grounding and supply bypassing essential for achieving useful system performance. Keep the analog return continuous beneath the audio path, decouple the supply at the device, and isolate headphone outputs from noisy switching nodes. Confirm the supported headphone impedance and output-current limits from the manufacturer electrical characteristics before connecting demanding or low-impedance headsets.

Uyumluluk Bilgisi

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The RoHS status is identified as compliant in the component listing. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer documentation.

Veri doğrulanma tarihi: 2026-11-16 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

AK4205EN datasheet AK4205EN pinout AK4205EN datasheet pdf AK4205EN 36-QFN pinout AK4205EN THD+N -118 dB AK4205EN supply voltage AK4205EN headphone amplifier AK4205EN application circuit AK4205EN equivalent AK4205EN replacement AK4205EN vs AK4205 AK4205EN price AK4205EN stock Asahi Kasei AK4205EN

İlgili Bileşenler ve Terimler

Asahi Kasei Microdevices AK4205EN AK4205 AK4492 stereo headphone amplifier headphone amplifier interface audio interface IC integrated circuit semiconductor built-in analog switch THD+N 4.5 V to 6.5 V supply 36-QFN 36-WFQFN exposed-pad package QFN package family surface-mount package high-resolution Hi-Fi mobile audio battery-powered audio digital audio player mobile phone audio RoHS
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle