AT91FR40161-CI - 33MHz ARM7 MCU, 2MB Flash | Microchip
MPN: AT91FR40161-CI ✓ AktifAT91FR40161-CI Genel Bakış
A microcontroller is a programmable semiconductor device that integrates a processor core, memory, peripherals, and communication interfaces on one package. The AT91 family belongs to the broader hierarchy of embedded processors, microcontrollers, and semiconductor devices. It is appropriate for industrial controllers and embedded equipment where deterministic peripheral access, external bus connectivity, and a compact surface-mount footprint are more important than a highly integrated wireless interface.
The AT91FR40161-CI provides a 33 MHz clock, a 32-bit data bus with single-cycle access, and 256K-word Flash organized as 2 MB in a 1M x 16 arrangement. Its integration includes EBI/EMI, UART/USART, and a Watchdog Timer. Embedded ICE supports in-circuit debugging and emulation workflows, reducing the need for external debug infrastructure. The 120-terminal LBGA also provides substantially more connection density than a leaded or small-outline package.
The ARM7 processor executes 32-bit instructions while supporting the denser 16-bit Thumb instruction set. This combination provides access to a larger instruction space and more efficient compact code generation. The peripheral set is organized around embedded control rather than graphics or high-speed networking, making the device suitable for control loops, data acquisition, communication gateways, and supervisory systems that require deterministic behavior.
Typical applications include industrial data-acquisition equipment, serial-control panels, embedded test systems, communication controllers, and compact industrial controllers. The EBI/EMI interface is especially useful when the system needs external RAM, flash, or peripheral devices. UART/USART connections support external sensors, modems, service interfaces, and operator consoles, while the watchdog helps recover a system after a software or hardware fault.
PCB design should preserve the voltage and signal requirements of the 120-ball footprint, provide clean power distribution, and route the external-bus signals with appropriate timing margin. Software development should account for memory mapping, watchdog servicing, peripheral initialization, and the ARM7/Thumb execution mode. This page combines device characteristics, practical design considerations, application guidance, and verified sourcing information for engineers evaluating the AT91FR40161-CI.
Drop-in alternatifler için AT91FR40161-CI — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinAT91FR40161-CI Maksimum Değerlendirmeler & Elektriksel Özellikler
| Processor Core | ARM7, 16/32-bit RISC |
| Azami Saat Hızı | 33 MHz |
| Program Memory Type | Embedded Flash |
| Program Memory Capacity | 2 MB |
| Flash Organization | 1M x 16 |
| Data Bus | 32-bit, single-cycle access |
| Instruction Set | ARM Thumb, 16/32-bit |
| External Bus Interface | EBI/EMI |
| Serial Interface | UART/USART |
| Debug Support | Embedded ICE |
| Watchdog Timer | WDT peripheral |
| Paket | 120-LBGA, 17 x 11 mm |
| Terminal Count | 120 terminals |
| Package Shape | Rectangular |
| Temperature Grade | Industrial |
| Montaj Türü | Surface-mount BGA |
AT91FR40161-CI rectangular Pin Yapısı Kılavuzu
AT91FR40161-CI (rectangular paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: AT91FR40161-CI.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
AT91FR40161-CI için uygundur 6 uygulamas: Industrial Data-Acquisition Controller, Embedded Serial Control Panel, Communication Gateway Controller, Embedded Test and Measurement Controller, External Memory Expansion Controller, Industrial Sensor Controller.
Industrial Data-Acquisition Controller
The AT91FR40161-CI fits an industrial acquisition controller because its 33 MHz ARM7 core provides deterministic control while the EBI/EMI interface can connect external memory or bus peripherals. Its UART/USART channels support sensors, service ports, and operator interfaces, while the watchdog supervises a processor that may otherwise be left unattended. The 2 MB Flash accommodates embedded firmware, drivers, calibration tables, and protocol stacks. A typical design would use the EBI/EMI bus for external acquisition hardware and a UART for configuration or telemetry. The industrial temperature grade supports controlled industrial equipment, although the enclosure, EMC design, isolation, and thermal environment remain system-level requirements.
Önerilen
Embedded Serial Control Panel
The AT91FR40161-CI is appropriate for an embedded operator panel that must combine deterministic firmware with serial peripherals and external bus expansion. Its UART/USART interface can connect a local display controller, configuration computer, or service transceiver, while EBI/EMI provides access to external storage or dedicated peripheral logic. The 33 MHz ARM7 processor can manage state-machine behavior, keypad scanning, status indication, and communications without a separate host processor. Embedded ICE assists commissioning and field diagnostics. Layout must account for the 120-LBGA escape routing and keep serial and external-bus signals away from switching-power-supply nodes.
Önerilen
Communication Gateway Controller
The AT91FR40161-CI can serve as a communication gateway when a compact controller must combine protocol handling with external-memory connectivity. Its UART/USART peripherals suit serial links to field equipment, converters, or service equipment, while the EBI/EMI interface permits expansion through external RAM, flash, or bus peripherals. The 2 MB embedded Flash is useful for persistent firmware and configuration storage, and embedded ICE supports controlled firmware integration. A gateway design should define buffer sizes, timeout behavior, watchdog servicing, and brownout recovery before deployment. The industrial grade is appropriate for indoor industrial enclosures, but protection at external cable interfaces must be designed separately.
Önerilen
Embedded Test and Measurement Controller
The AT91FR40161-CI fits a compact test controller that needs a deterministic 33 MHz ARM7 processor, embedded program storage, and flexible external peripheral access. EBI/EMI can connect memory or acquisition logic, while UART/USART handles instrument commands and diagnostic output. Embedded ICE provides a practical development and debugging path, and the watchdog can restart a test sequence after a fault. Firmware architecture should isolate timing-critical acquisition from noncritical communications so that serial traffic does not disturb the measurement sequence. The 120-LBGA footprint requires careful high-density assembly, and analog measurement accuracy depends on separate front-end components and calibration.
Önerilen
External Memory Expansion Controller
The AT91FR40161-CI is appropriate when a compact control system needs to extend storage or peripheral access beyond its internal resources. The EBI/EMI interface provides the external-memory path, while the 32-bit data bus and single-cycle access support high-performance embedded workloads. The processor can coordinate flash storage, data buffers, and peripheral control without relying on a separate bus controller. Firmware should use the device memory map to avoid collisions and should include watchdog servicing that cannot be starved by blocking external transfers. PCB routing of the external-bus signals requires strict length control, defined reference planes, and termination appropriate to the selected bus topology and speed.
Önerilen
Industrial Sensor Controller
The AT91FR40161-CI can supervise compact industrial sensor assemblies that require local control, serial reporting, and external peripheral access. A UART/USART link can connect a digital sensor, radio, or service interface, while EBI/EMI allows an optional external memory device or bus peripheral. The 33 MHz ARM7 core supports filtering, calibration, diagnostics, and protocol processing, and the watchdog helps recover from stalled software. The industrial temperature grade supports use in protected indoor industrial environments. Signal conditioning, surge protection, grounding, and enclosure design must be handled outside the microcontroller and coordinated with the final field-cable environment.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: AT91FR40161-CI — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Brand | Microchip Technology |
| Package | 120-LBGA, 17 x 11 mm |
| Processor Core | ARM7, 16/32-bit RISC |
| Maximum Clock Frequency | 33 MHz |
| Program Memory | 2 MB embedded Flash |
| Flash Organization | 1M x 16 |
| External Bus | EBI/EMI |
| Serial Interface | UART/USART |
| Debug Support | Embedded ICE |
| Temperature Grade | Industrial |
Ana Farklılayıcılar
- Dense 120-ball integration in a 17 x 11 mm footprint (karşılaştırma:AT91FR40161)
- External peripheral expansion without a separate bus controller (karşılaştırma:AT91FR40161)
- Integrated debugging and fault supervision (karşılaştırma:AT91FR40161)
Tasarım Notları
Use the 120-ball drawing in the manufacturer datasheet as the authoritative footprint reference, and confirm ball-map changes before releasing the PCB. Place the BGA on a solid, continuous ground plane and route escape vias according to the PCB fabricator's capability. External EBI/EMI traces should use a referenced, uninterrupted plane and controlled geometry because these signals connect memory or bus peripherals at up to the controller's 33 MHz operating rate.
Partition the power and ground pins according to the manufacturer pin-description table rather than treating every ball as interchangeable. Keep switching-regulator routes and high-current output paths away from EBI/EMI, clock, and UART/USART signal areas. Place required bypass capacitors at the pins specified by the datasheet, provide a low-impedance return for each supply group, and verify startup, brownout, and reset behavior with worst-case load and peripheral activity.
Do not begin firmware development until the boot mode, interrupt vectors, memory regions, and peripheral pin multiplexing have been assigned against the manufacturer datasheet. In particular, a UART/USART function may depend on alternate pin routing, and incorrect early initialization can leave the external bus or watchdog unavailable. Keep bootloader and recovery paths consistent with the configured flash organization, and ensure the watchdog strategy cannot retrigger during legitimate long operations.
Preserve access to the embedded-debug interface and consider test-point requirements before routing the dense BGA escape field. UART/USART lines connected to external cables should receive the appropriate protection network at the connector or board edge, with its return path coordinated to the enclosure and chassis strategy. Keep the processor supply, external-bus interface, and debug signals on quiet internal regions, and use continuous reference planes to control impedance and reduce susceptibility to industrial EMI.
Uyumluluk Bilgisi
The AT91FR40161-CI is identified as an industrial-temperature-grade device, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration is stated in the accessible product information. AEC-Q100 qualification is not established for this ordering code.