Microchip Technology

ATSAML10E14A-MF - 32MHz Cortex-M23 MCU | Microchip Technology

MPN: ATSAML10E14A-MF ✓ Aktif
<25 uA/MHz Id 32-lead VQFN, 5 mm x 5 mm Package 32 MHz Speed 16 KB (16K x 8) Memory
MOQ: 1 |

ATSAML10E14A-MF Genel Bakış

The Microchip Technology ATSAML10E14A-MF is a 32-bit Arm Cortex-M23 microcontroller operating at up to 32 MHz, with 16 KB of flash memory and 4 KB of SRAM, housed in a 32-lead VQFN package measuring 5 mm by 5 mm. The device belongs to the SAM L10 family and combines a low-power processor architecture with an enhanced peripheral touch controller, advanced analog resources, an ISO7816 smart-card interface, and an event system.

A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one compact device. The ATSAML10E14A-MF sits within the hierarchy of embedded controller, microcontroller, semiconductor, and power-management electronic system. Its Arm Cortex-M23 core provides a 32-bit processing architecture suitable for compact control, sensing, communications, and low-power embedded products.

According to Microchip Technology, active-mode current consumption is less than 25 uA/MHz and sleep-mode consumption is less than 100 nA. These figures make the device useful for battery-operated products in which average power, rather than peak processing speed, determines operating life. The 16 KB flash provides program storage, while the 4 KB SRAM supports working memory, stack operations, and peripheral data handling.

The ATSAML10E14A-MF integrates an enhanced peripheral touch controller for capacitive sensing and advanced analog peripherals for signal acquisition and control. Its ISO7816 interface supports smart-card communication, while the event system provides a hardware mechanism for routing events between peripherals. These resources allow designers to consolidate functions that might otherwise require separate interface or analog ICs.

Typical uses include capacitive touch panels, low-power sensor nodes, smart-card readers, industrial control modules, compact access-control equipment, and event-driven embedded controls. The 32 MHz Cortex-M23 core provides sufficient performance for protocol handling, state-machine control, and peripheral coordination while retaining the low-power characteristics of the SAM L10 family.

When designing the PCB, use the manufacturer's pin-description and land-pattern information to assign every VQFN lead and preserve the exposed-pad thermal and electrical requirements. Place decoupling capacitors close to their supply pins and route sensitive analog inputs away from fast-changing digital and touch-sensing nodes to reduce coupling and measurement error.

This page combines the manufacturer product overview, distributor package details, drop-in alternatives, application guidance, and practical PCB design notes to help engineers evaluate the ATSAML10E14A-MF for compact, low-power embedded systems.

Drop-in alternatifler için ATSAML10E14A-MF — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller ATSAML10E14A-MF (aynı form faktörü ve ayağa oturma) — farklı olan Package, Mounting Type, Core, Core Architecture, Event System.

Microchip Technology
Package: 32-VQFN (5x5 mm)
Mounting Type: Surface Mount
Core: ARM Cortex-M23
İle Karşılaştır ATSAML10E14A-MF →
Microchip Technology
Package: 32-pin VQFN (5x5 mm)
Mounting Type: Surface Mount
Core: ARM Cortex-M23 (Armv8-M baseline)
İle Karşılaştır ATSAML10E14A-MF →
Microchip Technology
Package: 32-pin VQFN (5x5 mm) with Exposed Pad
Mounting Type: Surface Mount
Core: ARM Cortex-M23
İle Karşılaştır ATSAML10E14A-MF →

ATSAML11E14A-MU

✅ Yerleştirme
Microchip Technology
📦 32-VQFN
ARM Cortex-M23 · ARMv8-M (TrustZone-M) · 32 MHz · 16 KB (16K x 8) Flash · 8 KB · 1.6 V to 3.6 V · -40 C to +85 C · 32-pin VQFN (5x5 mm) with Exposed Pad

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

ATSAML10E16A-MF

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Microchip Technology
📦 32-VQFN
ARM Cortex-M23 (Armv8-M baseline) · 32-bit · 32 MHz · 64 KB (64K x 8) · 16 KB · 32-pin VQFN (5x5 mm) · Surface Mount · 1.62 V to 3.63 V

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

ATSAML10E14A-MF Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type 32-bit ARM Cortex-M23 microcontroller
Product Family SAM L10
Processor Core Arm Cortex-M23
Maximum CPU Frequency 32 MHz
Flash Memory 16 KB (16K x 8)
Static RAM 4 KB
Architecture 32-bit single-core
Paket 32-lead VQFN, 5 mm x 5 mm
Montaj Türü Surface-mount, no-lead
Maximum Temperature Grade 125 °C
Active Current Consumption <25 uA/MHz
Sleep Current Consumption <100 nA
Touch Sensing Enhanced peripheral touch controller
Analog Features Advanced analog peripherals
Smart-Card Interface ISO7816 interface
Event System Hardware event system
Shipping Package Tray
Green Compliance Green

ATSAML10E14A-MF tray Pin Yapısı Kılavuzu

ATSAML10E14A-MF (tray paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

tray paket pin çizelgesi için ATSAML10E14A-MF

Ayrıntılı pin çıkış verisi mevcut değil: ATSAML10E14A-MF.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

ATSAML10E14A-MF için uygundur 6 uygulamas: Capacitive Touch Control Panels, Smart-Card Reader Interfaces, Low-Power Industrial Sensor Nodes, Smart Building Access Controls, Battery-Powered IoT Instruments, Event-Driven Embedded Control.

🧩

Capacitive Touch Control Panels

The ATSAML10E14A-MF is well suited to capacitive touch controls because it combines an enhanced peripheral touch controller with a 32 MHz Arm Cortex-M23 core. The MCU can scan sensor electrodes, apply filtering and debounce logic, detect gestures, and update a host interface while operating between less than 25 uA/MHz active and less than 100 nA sleep. Route sensitive capacitive-sensing traces away from switching power nodes, use a quiet ground reference, and follow the manufacturer’s recommended electrode and shielding layout to preserve touch accuracy.

🔒

Smart-Card Reader Interfaces

The ATSAML10E14A-MF can serve as the control MCU in a smart-card reader because it includes an ISO7816 interface alongside 16 KB of flash, 4 KB of SRAM, and an event system. Firmware can manage card-present detection, command exchange, state transitions, and status indication without requiring a separate protocol interface IC. Validate signal levels, clocking, and electrical timing against the applicable ISO7816 requirements, and keep the card interface return path away from noisy switching circuitry.

🏭

Low-Power Industrial Sensor Nodes

The ATSAML10E14A-MF fits compact industrial sensor nodes that spend most of their operating time asleep. Microchip Technology specifies less than 25 uA/MHz in active mode and less than 100 nA in sleep mode, allowing the 32 MHz Cortex-M23 core to perform sampling, filtering, and control with limited energy use. Its advanced analog resources support sensor conditioning, while the event system can reduce polling overhead. Overall battery life should also account for sensor excitation, communications, regulator efficiency, and external leakage.

🏠

Smart Building Access Controls

The ATSAML10E14A-MF can coordinate access-control functions such as credential reading, request evaluation, indicator control, and communications in a compact embedded controller. Its ISO7816 interface supports smart-card-oriented designs, while the advanced analog and event-system resources can help manage inputs and peripheral events. For security-sensitive access products, evaluate the related ATSAML11E14A-MU for its Arm TrustZone capability and establish an appropriate hardware root-of-trust and secure-update strategy.

🌐

Battery-Powered IoT Instruments

The ATSAML10E14A-MF supports battery-powered IoT instruments that require more processing capability than a simple timer but must preserve standby life. The 32-bit Cortex-M23 core handles protocol state machines and control logic, 16 KB flash stores application code, and 4 KB SRAM accommodates working data. Sleep current below 100 nA provides a useful baseline, although real battery life depends on radio duty cycle, sensor load, supply quiescent current, and the energy required during wake-up. Use the event system to minimize unnecessary processor polling.

⚙️

Event-Driven Embedded Control

The ATSAML10E14A-MF is appropriate for event-driven control systems that must react to peripherals without continuously polling every status register. The hardware event system can coordinate activity among the enhanced touch controller, analog resources, timers, and communications interfaces, while the 32 MHz core executes the associated control logic. This architecture can reduce processing activity and help meet low-power goals. Firmware designers should still define deterministic event priorities, timeout behavior, and diagnostic paths for missed or malformed peripheral events.

What are the key specifications of ATSAML10E14A-MF that engineers should know?
The ATSAML10E14A-MF is a 32-bit Arm Cortex-M23 microcontroller rated up to 32 MHz, with 16 KB of flash memory and 4 KB of SRAM, in a 32-lead VQFN package. According to the Microchip Technology product page, it consumes less than 25 uA/MHz in active mode and less than 100 nA in sleep mode. It also includes an enhanced touch controller, advanced analog resources, an ISO7816 interface, and an event system.
What is the operating voltage range of ATSAML10E14A-MF?
The ATSAML10E14A-MF operates from the supply-voltage range specified in the Microchip Technology SAM L10 documentation. The product overview identifies it as a 32 MHz, 16 KB-flash Cortex-M23 MCU with 4 KB SRAM, but it does not state the numerical input-voltage limits. Use the manufacturer electrical-characteristics table to confirm the operating and absolute-maximum voltage values for the specific package before finalizing the power architecture.
Where can I download the ATSAML10E14A-MF datasheet PDF?
The official ATSAML10E14A datasheet is accessible through Microchip Technology's product page at https://www.microchip.com/en-us/product/ATSAML10E14A. The document identifies the SAM L10 family, Arm Cortex-M23 architecture, 32 MHz operating speed, 16 KB flash, 4 KB SRAM, and 32-VQFN package. Use the pin-description, electrical-characteristics, and package-drawing sections when assigning PCB lands and checking supply limits.
Where can I find the ATSAML10E14A-MF pinout?
The ATSAML10E14A-MF pinout is defined in the pin-description table and package drawing in the Microchip Technology SAM L10 family documentation. The device uses a 32-lead VQFN package with a 5 mm by 5 mm body. Because individual lead functions are not listed on the product page, use the manufacturer pin table for exact numbering, exposed-pad connection, and alternate-function assignments before routing the PCB.
Where can I buy ATSAML10E14A-MF online?
Use the Request a Quote form on this page to request ATSAML10E14A-MF availability, lot conditions, and a delivered quotation. The component is listed as a 32 MHz Arm Cortex-M23 SAM L10 microcontroller with 16 KB flash and 4 KB SRAM in a 32-VQFN package. The quote request should specify the required quantity, tray or tape-and-reel preference, and any date-code or traceable-lot requirements.
What is the price of ATSAML10E14A-MF?
Pricing for the ATSAML10E14A-MF is quoted through the Request a Quote form on this page because commercial terms can change with quantity, packaging, and current component supply. When requesting a quotation, identify whether the order requires tray packaging, tape-and-reel packaging, factory-sealed reels, date-code limits, automotive qualification, or traceability documentation. These requirements determine the applicable supply channel and final commercial terms.
What is the lead time for ATSAML10E14A-MF?
The current ATSAML10E14A-MF lead time should be confirmed through the Request a Quote form on this page. Lead time may vary with order quantity, package format, production status, and allocation constraints. Include the target quantity, desired delivery date, and whether partial shipments are acceptable. A dated and traceable requirement may require a different sourcing plan than a standard non-traceable production order.
Is ATSAML10E14A-MF in stock?
Use the Request a Quote form on this page to check current ATSAML10E14A-MF stock and allocation status. The manufacturer page identifies the part as a 16 KB-flash, 4 KB-SRAM SAM L10 Cortex-M23 MCU in a 32-VQFN package, while availability can change independently of technical status. Provide the exact package suffix, required quantity, and delivery expectations so the response reflects the correct production variant.
ATSAML10E14A-MF vs ATSAML11E14A-MU - which is better for a secure application?
The ATSAML11E14A-MU is the better choice when Arm TrustZone security is required because the SAM L11 family adds that capability to the related Cortex-M23 architecture. The ATSAML10E14A-MF is otherwise positioned for low-power embedded control with its 32 MHz core, 16 KB flash, 4 KB SRAM, touch controller, and ISO7816 interface. Both are compared as 32-VQFN devices, but final peripheral and pin compatibility must be confirmed in the manufacturer pin tables.
What is the difference between ATSAML10E14A-MF and ATSAML10E14A-AF?
The ATSAML10E14A-MF uses a 32-VQFN package measuring 5 mm by 5 mm, while the ATSAML10E14A-AF uses a 32-TQFP package measuring 7 mm by 7 mm. The package suffix therefore changes the PCB footprint and prevents a direct drop-in substitution without redesign. Both belong to the ATSAML10E14A device family, so core and memory functions are closely related, but board layout, assembly, and pin availability must be reviewed separately.
When should I choose ATSAML10E14A-MF over ATSAML10E14A-AF?
Choose the ATSAML10E14A-MF when the PCB requires the smaller 5 mm by 5 mm 32-VQFN footprint. Choose the ATSAML10E14A-AF when a 7 mm by 7 mm 32-TQFP package is preferable for assembly, inspection, or board-layout requirements. The two suffixes are not drop-in alternatives because their land patterns differ; the device functions may be closely related, but the physical PCB design must match the selected package.
Is ATSAML10E14A-MF suitable for a battery-powered IoT sensor node?
The ATSAML10E14A-MF is suitable for a battery-powered IoT sensor node because Microchip Technology specifies less than 25 uA/MHz active consumption and less than 100 nA sleep consumption. Its 16 KB flash, 4 KB SRAM, advanced analog resources, and event system support compact sensing and control designs. Battery-life calculations should include sensor duty cycle, radio activity, regulator efficiency, and leakage outside the MCU operating modes.
What can replace ATSAML10E14A-MF?
The closest documented replacement candidate is the ATSAML11E14A-MU because it is presented as a 32-VQFN, 16 KB-flash Cortex-M23 MCU and adds the SAM L11 family's Arm TrustZone capability. It should not be treated as an unconditional pin-for-pin substitute until the two manufacturer pin tables, electrical characteristics, and peripheral assignments are compared. The ATSAML10E14A-AF is functionally related but uses a different 32-TQFP footprint.
Is ATSAML10E14A-MF the same as ATSAML11E14A-MU?
The ATSAML10E14A-MF and ATSAML11E14A-MU are related 32-VQFN Cortex-M23 MCUs, but they are not the same device. The SAM L10 part provides 16 KB flash and 4 KB SRAM with low-power operation, while the SAM L11 comparison emphasizes TrustZone support. Treat the SAM L11 as a design-review candidate rather than an automatic drop-in replacement until every lead assignment, peripheral function, clock feature, and power characteristic has been verified.
How is the ATSAML10E14A-MF used in a capacitive touch application?
The ATSAML10E14A-MF uses its enhanced peripheral touch controller to measure changes in capacitance from external sensor electrodes and convert them into touch events. The 32 MHz Cortex-M23 core can then apply thresholds, debounce logic, filtering, and interface updates while the event system routes peripheral events. Place sensor traces away from switching nodes and follow the manufacturer's recommended grounding and shielding techniques to maintain signal integrity.

Mühendislik referans verileri: ATSAML10E14A-MF — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the ATSAML10E14A-MF for a compact, low-power embedded design that specifically requires a 32 MHz Arm Cortex-M23 core, 16 KB flash, 4 KB SRAM, an enhanced touch controller, advanced analog resources, an ISO7816 interface, and a 32-VQFN footprint. Consider the ATSAML11E14A-MU when your design requires Arm TrustZone or other SAM L11 security functions, but verify the complete pin and peripheral configuration before treating it as a substitute. ATSAML10E16A-MF may be useful when the same-family architecture and package are required but more program memory is needed. Do not select ATSAML10E14A-AF for an existing 32-VQFN board because its 32-TQFP package requires a different footprint and PCB layout.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün ATSAML11E14A-MU ATSAML10E16A-MF
Brand Microchip Technology Microchip Technology Microchip Technology
Package 32-VQFN (5x5 mm) 32-VQFN 32-VQFN
Processor Core Arm Cortex-M23 Arm Cortex-M23 Arm Cortex-M23
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz
Security Architecture Arm Cortex-M23 Arm Cortex-M23 with Arm TrustZone Arm Cortex-M23

Ana Farklılayıcılar

  • Lower-power Cortex-M23 platform (karşılaştırma:ATSAML11E14A-MU)
  • Integrated smart-card connectivity (karşılaştırma:ATSAML10E16A-MF)
  • Compact 5 mm by 5 mm footprint (karşılaştırma:ATSAML10E14A-AF)

Tasarım Notları

Use the manufacturer's 32-VQFN land pattern and exposed-pad guidance rather than creating a footprint from the 5 mm body size alone. Confirm whether the thermal pad connects to ground, a supply rail, or another specified net, and follow the recommended via pattern. Place input and bulk decoupling capacitors close to their associated supply pins to minimize loop area and maintain low-impedance supply behavior during 32 MHz switching activity.

Keep capacitive-touch traces short, guarded, and separated from switching nodes, high-current returns, and antenna structures. Provide a quiet reference plane where the manufacturer layout guidance permits it, and connect analog and digital return currents deliberately. Touch accuracy and analog measurement noise are strongly affected by capacitive coupling, so inspect the final board with the product operating in its highest switching and radio-adjacent conditions.

Estimated low-power operation depends on duty cycle: at 32 MHz, the active-current ceiling of 25 uA/MHz corresponds to no more than 800 uA while the CPU is operating continuously. Actual consumption can differ with peripherals, flash execution, voltage, temperature, and sleep configuration. Use the Microchip current-consumption modes as design inputs, then measure the complete product because sensor, regulator, communication, and leakage loads may dominate standby energy.

Do not treat a related SAM L10 or SAM L11 order code as a drop-in replacement until all 32 package leads and exposed-pad connections have been compared. Pay particular attention to TrustZone, peripheral availability, clock features, analog channels, and default pin states. Also do not infer the operating voltage from the 32 MHz clock rating; confirm supply limits and decoupling requirements in the manufacturer electrical-characteristics table before power-up.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The distributor listing identifies the part as green, but specific RoHS, REACH, lead-free, halogen-free, AEC-Q100, and conflict-minerals declarations require confirmation from the Microchip Technology product documentation or declaration of compliance.

Veri doğrulanma tarihi: 2026-11-20 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

ATSAML10E14A-MF datasheet ATSAML10E14A-MF pinout ATSAML10E14A-MF datasheet pdf ATSAML10E14A-MF specifications ATSAML10E14A-MF price ATSAML10E14A-MF stock ATSAML10E14A-MF equivalent ATSAML10E14A-MF replacement ATSAML10E14A-MF vs ATSAML11E14A-MU ATSAML10E14A-MF footprint Microchip ATSAML10E14A-MF ATSAML10E14A-MF touch controller ATSAML10E14A-MF smart card ATSAML10E14A-MF application circuit

İlgili Bileşenler ve Terimler

Microchip Technology ATSAML10E14A-MF ATSAML10E14A ATSAML11E14A-MU ATSAML10E16A-MF ATSAML10E14A-AF Arm Cortex-M23 Arm TrustZone SAM L10 SAM L11 microcontroller embedded controller semiconductor 32-VQFN VQFN family surface mount SMD enhanced peripheral touch controller advanced analog peripherals ISO7816 smart-card interface event system active current sleep current 16 KB flash memory 4 KB SRAM
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle