ATSAMS70N21A-AN - 300MHz Cortex-M7 MCU | Microchip
MPN: ATSAMS70N21A-AN ✓ AktifATSAMS70N21A-AN Genel Bakış
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces onto one device. Within the product hierarchy, the ATSAMS70N21A-AN is an ARM Cortex-M7 MCU, a 32-bit embedded processor, and a flash-based microcontroller designed to execute control software and handle real-time peripheral operations without a separate external memory interface for its program storage.
The device operates at up to 300 MHz and includes a Floating Point Unit for accelerated single-precision floating-point calculations. Its 2048 KB embedded Flash supports application firmware, while 384 KB of SRAM provides working memory for real-time data processing. The 100-LQFP package exposes 100 device pins and supports compact surface-mount PCB construction. A 1.2 V or 3.3 V supply is identified for this device in product-listing information.
The Cortex-M7 architecture is suited to compute-intensive embedded workloads that need deterministic control together with greater arithmetic throughput than smaller microcontroller cores. Its integrated memory reduces the need for external program storage, while the parallel peripheral set allows the device to service communications, timers, analog interfaces, and external memory-control functions. The 300 MHz operating limit should be treated as a maximum device rating, with actual clocking determined by the power configuration and operating conditions.
Typical uses include industrial control equipment, connected factory nodes, audio processing, high-speed communications infrastructure, test and measurement systems, robotics, and embedded IoT controllers. Engineers commonly pair this MCU with external transceivers, memory, sensors, and power regulators when the application requires connectivity or precision analog measurement beyond the integrated peripherals.
Board design must preserve the LQFP land pattern, power and decoupling requirements, clock stability, and exposed signal constraints specified by Microchip. Confirm pin multiplexing, peripheral availability, voltage tolerances, and package dimensions against the manufacturer documentation before committing a PCB footprint. The ATSAMS70N21A-AN should be selected when its Cortex-M7 performance, memory capacity, and 100-LQFP interface set match the required embedded architecture.
Drop-in alternatifler için ATSAMS70N21A-AN — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller ATSAMS70N21A-AN (aynı form faktörü ve ayağa oturma) — farklı olan SRAM, ADC, Package, Program Memory (Flash), Supply Voltage.
ATSAME70N21A-AN
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ATSAME70N19A-AN
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ATSAMS70N21A-AN Maksimum Değerlendirmeler & Elektriksel Özellikler
| Processor Core | ARM Cortex-M7 |
| Architecture | 32-bit |
| Maximum CPU Frequency | 300 MHz |
| Floating Point Unit | Yes |
| Flash Memory | 2048 KB |
| Flash Organization | 2M x 8 bits |
| SRAM | 384 KB |
| Besleme Gerilimi | 1.2 V or 3.3 V |
| Paket | 100-pin LQFP (14 x 14 mm) |
| Pin Sayısı | 100 pins |
| Montaj Türü | Surface mount |
| Product Family | SAM S70 |
| Product Type | Flash microcontroller |
ATSAMS70N21A-AN 100-pin lqfp (14 x 14 mm) Pin Yapısı Kılavuzu
ATSAMS70N21A-AN (100-pin lqfp (14 x 14 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: ATSAMS70N21A-AN.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
ATSAMS70N21A-AN için uygundur 6 uygulamas: Industrial Automation Controller, Connected IoT Edge Node, Audio Signal Processing, Robotics and Motor Control, Test and Measurement Instrument, Communications Gateway.
Industrial Automation Controller
The ATSAMS70N21A-AN fits industrial automation controllers that combine deterministic machine control with communication-intensive supervisory software. Its 300 MHz ARM Cortex-M7 processor and Floating Point Unit provide computational headroom for motion algorithms, diagnostics, and data processing, while 2048 KB of Flash provides room for a control application and network stack. The 100-LQFP package exposes a broad peripheral set for sensors, actuators, and communications. Designers should verify the exact pin multiplexing and industrial temperature requirements against the Microchip documentation before layout release.
Önerilen
Connected IoT Edge Node
The ATSAMS70N21A-AN is suitable for a connected edge node that aggregates local sensor data, applies filtering, and prepares information for network transmission. Its 384 KB of SRAM supports concurrent protocol buffers and real-time application state, while the Cortex-M7 FPU accelerates floating-point workload processing at up to 300 MHz. The 2048 KB embedded Flash stores firmware, configuration, and update logic. The exact serial, Ethernet, USB, or transceiver interface should be matched against the device pin table, with separate network hardware added when required.
Önerilen
Audio Signal Processing
The ATSAMS70N21A-AN can serve as the control and signal-processing core in an embedded audio system because the Cortex-M7 Floating Point Unit supports real-time numerical operations at up to 300 MHz. The 384 KB SRAM provides working space for sampling buffers and mixing or filtering stages, while 2048 KB of Flash accommodates control code and configuration. Actual audio performance still depends on the selected codec interface, sample rate, external memory, and buffering architecture. Verify that the required I2S, SAI, or other audio signals are assigned to accessible pins.
Önerilen
Robotics and Motor Control
The ATSAMS70N21A-AN is appropriate for robotics subsystems that combine motion-control timing with higher-level sensor fusion or communication logic. The 300 MHz Cortex-M7 core can execute control loops while the Floating Point Unit handles filter and transform calculations, and 384 KB of SRAM accommodates real-time state. Its 100-pin LQFP package offers sufficient physical connections for multiple timer, serial, and debug functions. External motor drivers, position sensors, and a regulated power architecture remain necessary; pin-mux and timing checks should precede schematic capture.
Önerilen
Test and Measurement Instrument
The ATSAMS70N21A-AN fits a high-performance embedded measurement instrument when the product needs substantial firmware storage, deterministic peripheral control, and real-time numerical processing. Its 2048 KB of Flash and 384 KB of SRAM are suitable for acquisition logic, calibration data, and instrument control, while the Cortex-M7 FPU accelerates filter and transform operations. Designers should use the 100-LQFP footprint only after confirming lead pitch, exposed pad requirements, and signal assignments. External precision converters, amplifiers, and communication transceivers will define much of the final signal chain.
Önerilen
Communications Gateway
The ATSAMS70N21A-AN can serve as the local processor in a communications gateway that manages protocols, routes data, and monitors equipment status. A 300 MHz Cortex-M7 core provides capacity for concurrent protocol processing, and the 384 KB SRAM supports packet buffering and stateful network applications. The 2048 KB Flash partition gives firmware developers room for protocol stacks and management logic. Since the listed device does not by itself specify every external network interface, the design may require Ethernet, USB, or RF transceivers connected through the available serial and communication peripherals.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: ATSAMS70N21A-AN — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | ATSAME70N21A-AN | ATSAME70N19A-AN |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-LQFP (14 x 14 mm) | 100-LQFP | 100-LQFP |
| Product Family | SAM S70 | SAM E70 | SAM E70 |
| Processor Core | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 |
| Maximum CPU Frequency | 300 MHz | 300 MHz | 300 MHz |
| Architecture | 32-bit | 32-bit | 32-bit |
Ana Farklılayıcılar
- SAM S70 family alignment (karşılaştırma:ATSAME70N21A-AN)
- Documented 384 KB SRAM configuration (karşılaştırma:ATSAME70N19A-AN)
- 300 MHz Cortex-M7 with Floating Point Unit (karşılaştırma:ATSAME70N19A-AN)
Tasarım Notları
Use the manufacturer's recommended power, decoupling, and clock configuration when assigning the ATSAMS70N21A-AN. Place bulk capacitance near the device supply pins and high-frequency decoupling close to each relevant power terminal to control supply impedance at 300 MHz. Separate analog, digital, and I/O supply paths where the device configuration permits, and avoid routing switching-regulator or high-current motor-return paths beneath the MCU.
Confirm the 100-LQFP land pattern, terminal pitch, courtyard, solder mask, and paste apertures before PCB release. Pay particular attention to thermal and power connections described by Microchip rather than assuming that every 100-pin package has an exposed thermal pad. Use a thermal-aware escape strategy and adequate copper around power pins while preserving clean return paths for high-speed signals.
Do not approve a replacement solely because the processor speed, memory size, and package appear similar. ATSAMS70N21A-AN is a SAM S70 device, while the listed alternatives are from the SAM E70 family. Compare every used pin, alternate-function mapping, interrupt assignment, power pin, ground pin, and peripheral instance, then review boot, debug, and firmware startup behavior for each candidate.
Apply the manufacturer clock and signal-integrity guidance to all high-speed interfaces. Keep clock routing short and symmetrical, provide continuous return references beneath routed signals, and terminate unused interface pins according to the device documentation. For external memory or communications paths, validate edge-rate and crosstalk margins in the PCB stack-up rather than relying only on nominal clock frequency.
Uyumluluk Bilgisi
The current manufacturer product page should be consulted for material-declaration, lead-free, and product-qualification documents covering the exact ordering configuration.