ATTINY424-XU - 20MHz AVR Microcontroller | Microchip Technology
MPN: ATTINY424-XU ✓ AktifATTINY424-XU Genel Bakış
A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals on one device. The ATTINY424-XU belongs to the hierarchy of microcontrollers, embedded processors, and semiconductors. Its small memory footprint and 14-pin package make it suitable for compact control, sensing, and communication modules where board area and energy efficiency are important constraints.
The device provides 4 KB of in-system programmable Flash organized as 4K by 16-bit pages, together with 512 bytes of SRAM and 128 bytes of EEPROM. The AVR CPU supports 16-bit and 32-bit instructions and executes at up to 20 MHz. Core-independent peripherals reduce interrupt overhead and allow timing, serial communication, and other functions to operate with limited CPU involvement.
The ATTINY424 family also includes devices with 8 KB of Flash, providing a common platform for applications that require more program storage. The ATTINY424-XU is specifically identified as a 14-pin TSSOP industrial-temperature device rated to 85°C. Its compact package supports conventional surface-mount assembly while exposing the mixed-signal and digital resources required by embedded systems.
Typical uses include industrial control modules, compact sensor nodes, LED-control circuits, small motor controllers, and communication equipment. A design can use the 20 MHz clock for responsive control logic, utilize Flash for firmware, and place frequently changed configuration data in EEPROM. Serial-interface and timing peripherals can reduce firmware complexity when their core-independent functions match the application.
PCB design should preserve short return paths for digital and analog signals, place decoupling capacitors close to the supply pins, and route sensitive inputs away from fast-switching nodes. Designers should also verify the exact peripheral multiplexing and pin functions in the manufacturer pin-description table before assigning external circuitry. The 14-pin TSSOP footprint requires careful solder-paste and reflow design to achieve reliable fine-pitch joints.
This product page combines the manufacturer device information, exact-orderable-part identification, package details, and practical engineering guidance. It also distinguishes genuine drop-in replacements from related tinyAVR devices that use different packages or memory configurations, helping engineers make a defensible sourcing or replacement decision without assuming compatibility.
Drop-in alternatifler için ATTINY424-XU — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
ATTINY424-XF
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ATTINY424-XU Maksimum Değerlendirmeler & Elektriksel Özellikler
| Microcontroller Type | 8-bit AVR tinyAVR 2-series microcontroller |
| Maximum CPU Frequency | 20 MHz |
| Flash Memory | 4 KB |
| Flash Organization | 4K x 16-bit pages |
| Program Memory Type | In-system programmable Flash |
| SRAM | 512 bytes |
| EEPROM | 128 bytes |
| CPU Architecture | AVR with hardware multiplier |
| Instruction Word Length | 16-bit or 32-bit |
| Paket | 14-pin TSSOP |
| Maximum Operating Temperature | 85°C |
| Temperature Grade | Industrial |
| Montaj Türü | Surface mount |
| Green Indicator | Green |
| Core-Independent Peripherals | Yes |
ATTINY424-XU 14-pin tssop Pin Yapısı Kılavuzu
ATTINY424-XU (14-pin tssop paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: ATTINY424-XU.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
ATTINY424-XU için uygundur 6 uygulamas: Compact Industrial Control Module, Battery-Powered Sensor Node, LED Lighting Controller, Small Motor Control Controller, Serial Communication Equipment, Embedded Data Acquisition Front End.
Compact Industrial Control Module
The ATTINY424-XU fits compact industrial control modules where a 20 MHz control loop must operate from a 14-pin surface-mount footprint. Its 4 KB of in-system programmable Flash provides space for event sequencing, state-machine logic, and communication handling, while 512 bytes of SRAM supports working variables. The industrial-temperature marking and 85°C maximum rating distinguish it from extended-temperature variants. Use the mixed-signal inputs only after confirming their analog and digital multiplexing in the pin table, and isolate sensitive measurement paths from switching nodes to preserve control accuracy.
Önerilen
Battery-Powered Sensor Node
For a battery-powered sensor node, the ATTINY424-XU provides an 8-bit AVR processor running at up to 20 MHz while offering a compact 4 KB Flash and 512-byte SRAM footprint. Its EEPROM can hold small calibration or configuration records, reducing the need for external nonvolatile storage. Core-independent peripherals can offload repetitive timing or communication tasks and reduce active CPU time. Power savings still depend on the selected clock mode, peripheral activity, and external sensor load. Keep the supply path efficient and place the decoupling network close to the device.
Önerilen
LED Lighting Controller
The ATTINY424-XU is suitable for LED lighting controllers that combine timing logic, user commands, and multiple low-power outputs. Its 20 MHz execution rate supports responsive menu handling and animation updates, while the hardware multiplier and core-independent peripherals can accelerate compatible operations. The 4 KB program-memory limit is adequate for compact lighting patterns and communication protocols but requires disciplined code organization for larger feature sets. Ensure LED current is handled outside the microcontroller, use suitable drive transistors, and provide local decoupling at the device supply pins.
Önerilen
Small Motor Control Controller
The ATTINY424-XU can serve as the supervisory controller in a small motor system when the application needs compact firmware, fast event handling, and a limited pin count. Its AVR CPU runs at up to 20 MHz and its core-independent peripherals support deterministic control functions. The MCU should command a suitable power stage rather than drive motor current directly. Add fault handling for stalled or overloaded motors, separate noisy motor returns from analog references, and verify the operating-temperature requirement against the enclosure’s worst-case ambient temperature.
Önerilen
Serial Communication Equipment
The ATTINY424-XU is appropriate for compact serial-interface equipment that translates commands, updates a local display, or coordinates peripheral actions. Its 20 MHz AVR core can support responsive protocol handling, and the tinyAVR 2-series core-independent peripherals can reduce processor intervention for eligible communication functions. The 512-byte SRAM limit requires attention when buffering messages, while 4 KB of Flash constrains protocol stacks and feature complexity. Match the external transceiver levels and connector requirements, and route communications traces away from noisy power-conversion paths.
Önerilen
Embedded Data Acquisition Front End
The ATTINY424-XU can control a compact data-acquisition front end when measurements can be sampled and processed within the limits of a 20 MHz 8-bit AVR core and 512 bytes of SRAM. Its mixed-signal resources make it useful for supervisory conversion, thresholding, and configuration tasks when the selected analog channels and acquisition timing meet the application requirements. Use the shortest practical input traces, maintain a quiet reference return, and separate analog and digital return currents where the board layout allows. Confirm conversion timing and input limits from the datasheet rather than assuming performance from CPU frequency.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: ATTINY424-XU — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | ATTINY424-XF |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 14-pin TSSOP | 14-pin TSSOP |
| Flash Memory | 4 KB | 4 KB |
| Ordering Suffix | ATTINY424-XU | ATTINY424-XF |
Ana Farklılayıcılar
- Exact 4 KB Flash configuration in a compact 14-pin package (karşılaştırma:ATTINY426-XU)
- 20 MHz operation for responsive embedded control (karşılaştırma:ATTINY424-XF)
- Identified industrial-temperature orderable variant (karşılaştırma:ATTINY424-XF)
Tasarım Notları
Place the required supply-decoupling capacitors immediately adjacent to the ATTINY424-XU supply and ground pins. Keep the high-frequency return path continuous beneath or close to the device, and route analog inputs and references away from switching-node copper. Because the controller uses a 14-pin TSSOP package, its fine-pitch leads and limited pin count require careful land-pattern and paste-volume review before production.
Design the supply and grounding around the maximum 20 MHz operating condition rather than the idle state. External sensor loads, communication transceivers, and output drivers can create transient demand that is not represented by the microcontroller’s own current consumption. Include local bulk capacitance where the load changes rapidly, maintain a stable reference return, and verify brownout and startup behavior against the actual supply ramp.
Do not treat ATtiny424-family devices with different flash sizes, package pin counts, or suffix codes as automatic replacements. ATTINY426-XU uses a different package from ATTINY424-XU, while ATTINY424-XF requires ordering-information verification. Before substitution, compare the complete ordering code, pin-by-pin function, power pins, programming interface, memory limits, and maximum temperature rating, then recompile and test the firmware.
Uyumluluk Bilgisi
The distributor listing identifies ATTINY424-XU as Green, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified. The Green designation should not be treated as a substitute for those individual compliance statements.
