BCM5395SIPB - 5-Port Gigabit Ethernet Switch | Broadcom
MPN: BCM5395SIPB ✓ AktifBCM5395SIPB Genel Bakış
An Ethernet switch is a semiconductor in the network-interface hierarchy: it connects multiple Ethernet ports, examines frame destinations, and forwards traffic only to the required output ports. A physical layer, or PHY, converts digital data into signals suitable for twisted-pair or optical media and recovers clock and data from incoming signals. By integrating five Gigabit PHYs with a switching engine and packet buffer, the BCM5395 family targets designs that need multiple Ethernet links without using five separate discrete PHY devices.
The principal verified feature is integration rather than a published numerical performance rating. The supplied sources identify the BCM5395 as a five-port Gigabit Ethernet switch with five integrated physical devices and a packet buffer. A corresponding distributor description also identifies BCM5395SIPB with an integrated GPHY and LIN-transceiver-related categorization, indicating Broadcom Ethernet connectivity expertise around the device. Exact line rate, media interface support, MAC count, packet-buffer depth, latency, and power figures require the original manufacturer datasheet before schematic or firmware decisions.
The integrated architecture can simplify a multi-port Ethernet design by consolidating five physical-layer blocks with switch resources in one package. Compared with a board made from discrete PHYs and a separate switching device, this integration can reduce board area, external PHY-management overhead, and the number of interconnects between the MAC-facing electronics and physical layers. The supplied sources do not confirm whether the SIPB suffix denotes a specific package, temperature grade, or production configuration, so the footprint must be confirmed from the official Broadcom ordering documentation before layout.
Typical BCM5395-family uses include industrial Ethernet gateways, network-interface controllers, embedded communications equipment, and multi-port LAN systems. Each of the five integrated PHYs can support a copper Ethernet connection when used with the appropriate magnetics, magnetics, and line-driver network. In an industrial gateway, the switching block can consolidate several field-bus or service ports into a single upstream processor interface. In embedded networking equipment, the integrated design can shorten board routing and reduce the number of separately managed Ethernet subsystems.
The critical design step is obtaining the full BCM5395SIPB datasheet and confirming the package, pin assignments, register model, reference clocks, PHY media support, and power-supply requirements. Do not assign PCB pads from distributor snippets alone. If the device includes LIN functionality, confirm the LIN electrical interface, transceiver pinout, wake-up behavior, and protection requirements independently. Broadcom's Ethernet devices also require careful separation between sensitive clock, reference-voltage, and analog supply networks, so the complete recommended decoupling and layout should be followed exactly.
Drop-in alternatifler için BCM5395SIPB — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinBCM5395SIPB Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | Integrated Ethernet switch and transceiver IC |
| Ethernet Switch Ports | 5 ports |
| Integrated Physical Layers | 5 integrated PHYs |
| Ethernet Data Rate | Gigabit Ethernet per verified product description |
| Integrated Packet Buffer | Yes |
| GPHY Integration | Integrated GPHY |
| LIN Transceiver Association | Distributor listing identifies BCM5395SIPB with LIN transceiver categorization |
| Manufacturer | Broadcom |
| Ordering Code | BCM5395SIPB |
BCM5395SIPB standard Pin Yapısı Kılavuzu
BCM5395SIPB (standard paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: BCM5395SIPB.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
BCM5395SIPB için uygundur 6 uygulamas: Industrial Ethernet Gateway, Embedded Network Interface Controller, Multi-Port Communication Equipment, Industrial LIN and Ethernet Gateway, Network Attached Storage Front End, Industrial Control Panel and HMI.
Industrial Ethernet Gateway
The BCM5395SIPB fits gateways that must consolidate several wired network endpoints into an upstream processor interface. Its verified five Gigabit Ethernet ports and five integrated PHYs reduce the number of separate Ethernet physical-layer subsystems that must be designed, powered, and managed. The internal packet buffer can support frame buffering within the switching fabric, although its exact depth must be confirmed from the Broadcom datasheet. Engineers should reserve magnetic-network footprints, isolated communication lines, and high-speed differential routing directly from the manufacturer reference layout. Confirm register support, PHY auto-negotiation behavior, and the available software driver before committing to this device.
Önerilen
Embedded Network Interface Controller
The BCM5395SIPB can serve as the multi-port network front end of an embedded controller when the host must communicate through several Ethernet links. Five integrated PHYs avoid designing a board populated with five unrelated copper-interface subsystems, while the integrated packet buffer supports centralized switching between ports. The relevant design tradeoff is that the host-facing interface, register model, and software support are not confirmed in the supplied snippets. Before schematic capture, obtain the full datasheet to identify the host bus, required reference clocks, PHY strap resistors, reset behavior, and firmware dependencies. Board layout should closely follow Broadcom's analog-supply and differential-pair guidance.
Önerilen
Multi-Port Communication Equipment
The five Gigabit ports and integrated packet buffer make the BCM5395SIPB relevant to communication equipment that presents several Ethernet service ports through one switching silicon platform. Such systems can use the integrated PHYs for copper links while centralizing frame forwarding in the Broadcom device. Integration can reduce component count and simplify enclosure space, but it does not eliminate the need for magnetics, protection, and controlled-impedance routing. The engineer should verify the actual supported copper PHY variant, auto-negotiation modes, and port isolation features from the official documentation. Firmware selection and managed-switch features must also be checked because the distributor snippets do not describe the software feature set.
Önerilen
Industrial LIN and Ethernet Gateway
A distributor listing associates BCM5395SIPB with LIN transceiver functionality alongside integrated GPHY capability, making it a candidate for gateway equipment bridging industrial LIN networks and Ethernet backbones. This combination could reduce interface-controller count when both network types terminate on one board. The association must nevertheless be validated against the official SIPB datasheet because the supplied source does not publish the LIN data rate, protection level, wake-up features, or pinout. Engineers should therefore treat the Ethernet integration as verified and the LIN specifics as provisional. Check isolation strategy, bus termination, transceiver supply, fault handling, and firmware driver requirements before approving the design.
Önerilen
Network Attached Storage Front End
The BCM5395SIPB is relevant to storage appliances that require several Ethernet service ports for shared storage access, management, and replication. Five integrated Gigabit PHYs can provide a compact switching front end, while the packet buffer assists frame handling within the Broadcom switching architecture. Actual throughput and latency cannot be claimed because the verified sources provide no switching-performance figures. Benchmarking must use the official media specification, packet sizes, and host configuration. Storage designers should also verify thermal performance at sustained port activity, connector placement, magnetics selection, and the availability of a qualified driver before committing to a storage platform.
Önerilen
Industrial Control Panel and HMI
A human-machine interface or industrial control panel may need several isolated network links for supervisory stations, service tools, plant-floor devices, and an upstream controller. The BCM5395SIPB's five integrated Gigabit PHYs can consolidate those copper interfaces while reducing the number of separate PHY packages. Because the SIPB package, pin count, power rails, and digital I/O tolerance remain unverified in the supplied data, a prototype should not begin until the official package drawing and electrical tables are reviewed. Pay particular attention to conducted-noise immunity, grounding, surge protection, and separation between plant-floor ports. Confirm whether Broadcom supplies evaluation material or a reference design for the exact ordering code.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: BCM5395SIPB — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Brand | Broadcom |
| Ethernet Switch Ports | 5 ports |
| Integrated Physical Layers | 5 integrated PHYs |
| Packet Buffer | Integrated |
| GPHY Integration | Integrated GPHY |
| LIN Transceiver Association | Listed by Mouser as LIN transceiver-related connectivity |
| Ethernet Data Rate | Gigabit Ethernet |
| Lifecycle Status | Not explicitly stated in the supplied sources |
Ana Farklılayıcılar
- Five-port integration in one BCM5395-family device (karşılaştırma:A discrete five-PHY network interface implementation)
- Centralized packet buffering (karşılaştırma:A board using independent Ethernet interfaces without a shared switching buffer)
- Multi-network-interface positioning (karşılaştırma:A single-port Ethernet interface design)
Tasarım Notları
Do not begin pad placement from the SIPB ordering code alone. The supplied sources do not identify the package, pin count, or land pattern, and the suffix could encode package, temperature, or production information. Secure the current Broadcom ordering table and package drawing, map every ball or lead, then follow the manufacturer's differential-pair and analog-layout reference. Verify PHY center-of-PCB placement and magnetics clearance against the official guidelines rather than generic Ethernet examples.
Separate the BCM5395SIPB's digital, analog, and PHY-related supplies exactly as directed by the full datasheet; the verified data supplies no voltage range, current rating, or power-consumption figure. Add only the recommended bulk and high-frequency decoupling, and provide clean return paths for each supply domain. Because five integrated PHYs can share switching transients, review the power-supply impedance, startup sequencing, and thermal rise under full-port traffic rather than sizing the rail from a nominal current figure alone.
The most likely sourcing error is treating BCM5395 as an unqualified substitute for BCM5395SIPB. The SIPB suffix's meaning, package, temperature grade, and electrical configuration were not confirmed by the supplied sources. Likewise, distributor association with LIN transceivers does not establish the complete LIN feature set. Before schematic release, compare the exact Broadcom ordering table, check for obsolete or discontinued notices, and request a manufacturer-approved alternative if the standard configuration is unavailable.
Uyumluluk Bilgisi
The supplied web results do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for BCM5395SIPB. These fields must be confirmed from the current Broadcom product declaration or material compliance documentation.