C8051F300P - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs
MPN: C8051F300P ✓ AktifC8051F300P Genel Bakış
A mixed-signal microcontroller is an integrated circuit that combines a digital processor and analog measurement functions in one device. In the product hierarchy, the C8051F300P belongs to the C8051 family of 8-bit microcontrollers, combining embedded control, in-system programming, and mixed-signal sensing. This integration lets a compact embedded system perform local control, signal acquisition, and digital processing without requiring several separate analog and digital devices.
Key features include 8 KB of flash program memory, 256 bytes of RAM, an 8-bit ADC operating at up to 500 ksps, and support for eight external ADC inputs. The ADC includes programmable amplifier gains referenced to an external VREF pin or the device supply voltage. Additional analog resources include a comparator with programmable hysteresis and response time, an external conversion-start input, and a built-in temperature sensor.
The C8051F300P is designed for compact embedded-control systems where moderate processing speed and fast analog conversion are more important than large memory capacity. Its 25 MHz core supports deterministic control tasks, while the integrated converter can capture changing analog inputs without requiring a separate ADC. The temperature-sensor output is described as extremely linear and suitable for relative temperature measurements, although calibration is recommended when absolute temperature accuracy is required.
Typical applications include industrial process monitoring, thermostat and environmental control, sensor-conditioning systems, analog signal acquisition, digital potentiometer control, and small embedded control platforms. The eight-input ADC is especially useful for multi-channel measurement systems, while the comparator supports threshold detection, supervision, and simple waveform functions.
Designers should use the manufacturer’s pin-description table when assigning analog inputs, reference voltage, comparator connections, programming signals, and supply pins. Decoupling, grounding, and analog trace layout should follow the recommended application circuit because the ADC and temperature sensor require careful treatment of reference and supply noise. The 14-pin DIP format also requires adequate through-hole spacing and appropriate board-clearance planning.
This product page combines the manufacturer’s device characteristics with practical mixed-signal design guidance, application-focused explanations, and a structured comparison of the documented resource set. These engineering details help simplify component selection while keeping final design decisions tied to the official C8051F30x data sheet.
Drop-in alternatifler için C8051F300P — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
C8051F301P
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
C8051F302P
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
C8051F303P
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
C8051F304P
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
C8051F305P
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
C8051F300P Maksimum Değerlendirmeler & Elektriksel Özellikler
| Microcontroller Type | 8-bit mixed-signal microcontroller |
| Processor Architecture | 8051-compatible 8-bit CPU |
| Azami Saat Hızı | 25 MHz |
| Flash Memory | 8 KB (8K x 8) |
| RAM | 256 bytes |
| ADC Resolution | 8 bit |
| Maximum ADC Conversion Rate | 500 ksps |
| External ADC Inputs | 8 inputs |
| ADC Programmable Gain | Programmable; reference selectable from external VREF or VDD |
| Comparator | 1 comparator with programmable hysteresis and response time |
| Temperature Sensor | Built-in uncalibrated sensor suitable for relative temperature measurement |
| ADC Trigger | External conversion-start input |
| Paket | 14-pin DIP |
| Montaj Türü | Through-hole |
| Programming Interface | In-system programming supported |
C8051F300P 14-pin dip Pin Yapısı Kılavuzu
C8051F300P (14-pin dip paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: C8051F300P.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
C8051F300P için uygundur 6 uygulamas: Industrial Process Monitoring, Thermostat and Environmental Control, Multichannel Sensor Acquisition, Analog Signal Threshold Detection, Embedded Control and Instrumentation, Digital Potentiometer Control.
Industrial Process Monitoring
The C8051F300P fits compact process-monitoring equipment that must acquire several analog signals while performing local control in real time. Its 8-bit ADC supports eight external inputs at rates up to 500 ksps, while the 25 MHz 8051-compatible core handles sampling sequencing, filtering, alarms, and communication tasks. The 256-byte RAM supports working variables, and the 14-pin DIP package simplifies through-hole industrial controller layouts. Use the recommended decoupling and grounding arrangement to keep reference and supply noise from degrading measurements.
Önerilen
Thermostat and Environmental Control
The C8051F300P is appropriate for thermostats and environmental-control panels that combine temperature sensing with direct actuator or interface control. Its built-in temperature sensor supports relative temperature measurement, and the manufacturer describes the uncalibrated output as extremely linear. A calibration step can improve absolute accuracy. The comparator can assist with threshold detection, while the ADC and digital control logic can supervise environmental inputs in a compact embedded platform.
Önerilen
Multichannel Sensor Acquisition
The C8051F300P can serve as the acquisition controller for a small, multichannel sensor node because its ADC accepts eight external inputs and converts at up to 500 ksps. Programmable amplifier gains allow the analog front end to accommodate different signal ranges, while VREF or VDD can serve as the ADC reference according to the design configuration. The 25 MHz processor can perform averaging, filtering, threshold checks, and data preparation without a separate digital controller.
Önerilen
Analog Signal Threshold Detection
The integrated comparator makes the C8051F300P useful for fast threshold and supervision functions where an input must be checked against a reference or limit. Programmable hysteresis and response time allow the behavior to be adapted to signals with different noise characteristics. The microcontroller can combine comparator events with ADC measurements and its 8051-compatible control logic, making it suitable for compact limit detectors, protection controllers, and simple edge-aware monitoring systems.
Önerilen
Embedded Control and Instrumentation
The C8051F300P supports small embedded instruments that require local control, analog measurement, and programmable flash storage without the complexity of a larger processor. Its 25 MHz operating frequency provides capacity for control loops and data processing, while 8 KB of flash stores firmware and 256 bytes of RAM holds immediate state. The 14-pin DIP package is particularly convenient for prototypes, educational systems, and legacy through-hole control boards that benefit from easy replacement.
Önerilen
Digital Potentiometer Control
The C8051F300P can control a digital potentiometer or similar resistive actuator through a mixed-signal embedded-control arrangement. The 8-bit ADC can monitor the resulting analog condition, the comparator can detect selected thresholds, and the 25 MHz core can calculate adjustment steps and manage timing. This combination is useful in calibration, test equipment, and compact set-point controllers where a dedicated communications processor would add unnecessary complexity.
Önerilen
Mühendislik referans verileri: C8051F300P — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Package | 14-pin DIP |
| Brand | Silicon Labs |
| CPU Architecture | 8051-compatible 8-bit |
| Maximum Clock Frequency | 25 MHz |
| Flash Memory | 8 KB |
| RAM | 256 bytes |
| ADC Resolution | 8 bit |
| Maximum ADC Conversion Rate | 500 ksps |
| External ADC Inputs | 8 inputs |
| Integrated Analog Resources | 8-bit ADC, comparator, and built-in temperature sensor |
Tasarım Notları
Place input and output decoupling capacitors close to their associated supply pins and preserve the manufacturer’s recommended ground arrangement. Because the ADC reference may be VREF or VDD, a stable supply and controlled reference routing are essential. Keep analog input traces away from fast digital transitions where practical, and use a common ground plane with short return paths rather than routing analog signals over split-plane boundaries.
Treat ADC acquisition as a settling-time problem as well as a sampling-rate problem. The Silicon Labs data sheet describes separate differential and single-ended ADC input circuits and provides settling-time guidance for a specified settling accuracy. Select external source impedances accordingly, allow each input to settle before conversion, and avoid unusually high source resistance unless the application circuit compensates for it.
Do not reuse the pin arrangement of another C8051F30x package. The C8051F300P is a 14-pin DIP device, and package ordering options such as C8051F300-GMR use a different physical format. Assign pins from the package-specific diagram, verify analog multiplexing and programming signals, and confirm the external crystal, reset, and programming connections against the official data sheet.
Uyumluluk Bilgisi
No explicit compliance declaration for the exact C8051F300P ordering option was identified in the available manufacturer and distributor records.