C8051F330D - 25MHz 8-Bit 8051 MCU | Silicon Labs
MPN: C8051F330D ✓ AktifC8051F330D Genel Bakış
An 8051-compatible microcontroller is an embedded processing IC that combines a microprocessor core, program memory, data memory, digital I/O, and embedded peripherals on one device. Within the semiconductor hierarchy, it is a microcontroller and mixed-signal system-on-chip rather than a general-purpose processor. The C8051F330D targets designs that need deterministic 8-bit control alongside analog measurement functions without requiring a separate ADC or interface IC.
The device operates at up to 25 MHz and provides 8 KB, organized as 8K by 8 bits, of Flash memory. Its mixed-signal feature set includes a 10-bit ADC capable of conversion rates up to 200 ksps and support for up to 16 external single-ended or differential inputs. The ADC reference can use the internal reference, an external reference pin, or the supply voltage, supporting flexible sensor and analog-front-end designs.
Two comparators add threshold and control functions around the ADC. Comparator inputs can be selected through a mux, comparator outputs may be routed to port pins, and comparator response time can be programmed for high-speed or low-power operation. This combination allows the MCU to supervise external signals while executing control logic, reducing component count in alarm, sensing, and industrial monitoring systems.
Typical applications include industrial sensor nodes, digital thermometers, analog measurement instruments, low-cost data loggers, and compact embedded controllers. The 20-pin PDIP package is also suitable for prototypes, educational platforms, and through-hole industrial assemblies where socketed parts or conventional DIP footprints simplify inspection and maintenance.
Designers should verify the complete pin description, clock requirements, memory map, and analog input limits in the manufacturer datasheet before layout. Analog and digital returns should be arranged carefully to minimize ground coupling, while oscillator and decoupling connections should follow the reference circuit and recommended placement guidance. Firmware must also be validated for all C8051F33x peripherals used in the application.
This page organizes the principal device characteristics, practical applications, package details, and design considerations into one engineering reference. It also distinguishes documented C8051F330D attributes from characteristics that require direct confirmation from the manufacturer datasheet.
Drop-in alternatifler için C8051F330D — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller C8051F330D (aynı form faktörü ve ayağa oturma) — farklı olan ADC Resolution, Mounting Type, Package.
C8051F330
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →C8051F331D
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
C8051F332D
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
C8051F333D
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
C8051F334D
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
C8051F330D Maksimum Değerlendirmeler & Elektriksel Özellikler
| Architecture | 8-bit 8051-compatible |
| Azami Saat Hızı | 25 MHz |
| Program Memory Type | 8 KB Flash |
| Program Memory Organization | 8K x 8 bits |
| Device Type | Mixed-signal system-on-chip microcontroller |
| ADC Resolution | 10 bits |
| Maximum ADC Conversion Rate | 200 ksps |
| ADC External Input Count | Up to 16 single-ended or differential inputs |
| Comparator Count | 2 comparators |
| Comparator Response Time | Programmable |
| Paket | 20-pin PDIP |
| Montaj Türü | Through-hole |
| Process Technology | CMOS |
| Temperature Grade | Industrial |
| RoHS Durumu | unknown |
| REACH Status | unknown |
C8051F330D 20-pin pdip Pin Yapısı Kılavuzu
C8051F330D (20-pin pdip paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: C8051F330D.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
C8051F330D için uygundur 6 uygulamas: Industrial Sensor Node, Digital Thermometer, Low-Cost Data Logger, Process Control Interface, Educational Microcontroller Platform, Embedded Control and Monitoring.
Industrial Sensor Node
The C8051F330D suits a compact industrial sensor node because its 10-bit ADC operates at up to 200 ksps and supports as many as 16 external single-ended or differential inputs. The MCU can acquire strain, pressure, level, or process signals while its two comparators perform local threshold supervision. At 25 MHz with 8 KB of Flash, it provides enough control performance for signal conditioning, filtering, alarms, and data-transfer logic. The 20-pin PDIP footprint also simplifies through-hole prototype and maintenance-oriented industrial assembly.
Digital Thermometer
A digital thermometer can use the C8051F330D as both the measurement controller and display-interface manager. Its 10-bit ADC supports conversion rates up to 200 ksps, allowing rapid acquisition from a resistive or semiconductor sensor, while the reference can be selected from internal, external-pin, or supply-voltage sources. The two comparators can provide a hardware threshold function, while the 8051-compatible 25 MHz core performs averaging, calibration, display updates, and alarm timing. The 20-pin PDIP package is convenient for a through-hole instrument prototype.
Low-Cost Data Logger
The C8051F330D can serve as the control center of a compact data logger for slow-changing analog measurements. Its 8 KB Flash provides on-chip program storage, and the integrated 10-bit ADC can sample up to 16 external single-ended or differential channels. The two comparators permit event-level monitoring without continuously involving the CPU, while the 25 MHz core handles timestamps, scaling, storage sequencing, and host communication. Its 20-pin PDIP package is especially useful for prototypes and low-volume industrial monitoring boards.
Process Control Interface
For a compact process-control interface, the C8051F330D combines an 8051-compatible control engine with integrated analog measurement functions. A thermocouple or process-transmitter signal can enter the 10-bit ADC, whose conversion capability reaches 200 ksps, while programmable comparator response times support fast threshold events. The MCU can operate valves, drive indicators, apply filtering, and manage digital I/O within one package. Its 20-pin PDIP format is well suited to through-hole control boards requiring easy inspection and component replacement.
Educational Microcontroller Platform
The C8051F330D provides a practical platform for teaching embedded and mixed-signal design because it combines an 8051-compatible core, 8 KB of Flash, a 10-bit ADC, and two comparators in one 20-pin package. Students can study timer, serial-interface, port-multiplexing, acquisition, and threshold-control behavior without assembling a large support board. Its through-hole PDIP package also permits straightforward breadboard or perfboard prototyping, although a dedicated development board may provide a more convenient teaching environment.
Embedded Control and Monitoring
The C8051F330D is suitable for embedded control and monitoring functions that combine periodic digital control with periodic analog observation. Its 25 MHz pipelined 8051-compatible core supports responsive control logic, while the integrated ADC and comparators reduce the need for separate analog interface components. Use the programmable comparator response options to balance event speed against power consumption. The 20-pin PDIP package also makes the device appropriate for prototypes and relatively low-volume through-hole assemblies.
Mühendislik referans verileri: C8051F330D — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | C8051F330 | C8051F331D | C8051F332D | C8051F333D | C8051F334D |
|---|---|---|---|---|---|---|
| Package | PDIP-20 | PDIP-20 ordering code must be confirmed | PDIP-20 | PDIP-20 | PDIP-20 | PDIP-20 |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| CPU Architecture | 8-bit 8051-compatible | 8-bit 8051-compatible | 8-bit 8051-compatible | 8-bit 8051-compatible | 8-bit 8051-compatible | 8-bit 8051-compatible |
| Maximum Clock Frequency | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz |
| Mounting Type | Through-hole | Through-hole for the compared ordering code | Through-hole | Through-hole | Through-hole | Through-hole |
Ana Farklılayıcılar
- Integrated mixed-signal resources (karşılaştırma:C8051F331D)
- Eight kilobytes of integrated Flash (karşılaştırma:C8051F332D)
- Through-hole 20-pin implementation (karşılaştırma:C8051F334D)
Tasarım Notları
Place decoupling capacitors close to the supply and ground pins, and reproduce the manufacturer’s oscillator and reset reference layout. Because several port pins can be assigned to analog functions, finalize the pin multiplexing plan before routing. Keep sensitive analog inputs away from digital output paths and oscillator circuitry, and provide a low-impedance ground reference for the ADC and comparator subsystem.
Treat the 10-bit ADC as a mixed-signal system rather than routing analog inputs like ordinary digital inputs. Verify source impedance, acquisition time, reference stability, and the usable input bandwidth against the required conversion rate. Differential signals must remain within the documented common-mode range. Comparator inputs and outputs also require checking because muxing and programmable response time can affect timing-sensitive thresholds.
Do not treat every C8051F33x family member as a functional drop-in replacement for the C8051F330D. Confirm the complete ordering code, package, memory map, peripheral set, port multiplexing, and temperature grade in the family selection table. After substitution, rebuild the firmware, rerun boundary tests on ADC conversion, comparators, timers, reset behavior, and clock startup, and confirm every formerly used pin still has the required function.
Uyumluluk Bilgisi
The device is listed as industrial temperature grade. RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status require confirmation from current manufacturer documentation.