CS8406-DZZ - 192kHz Stereo Digital Audio Transmitter | Cirrus Logic
MPN: CS8406-DZZ ✓ AktifCS8406-DZZ Genel Bakış
A digital audio interface transmitter converts source audio and control information into a standardized serial bitstream for reliable connection between equipment. Within the signal-chain hierarchy, the CS8406 belongs to the audio interface IC category and functions as a physical-layer transmitter rather than a DAC or audio codec. It accepts digital audio input, multiplexes the associated data, applies biphase mark encoding, and drives the resulting stream through a cable, transformer, or optical transmitter.
The CS8406-DZZ provides a maximum sampling rate of 192 kHz and two-channel transmission. Its 3-wire serial digital-audio control interface supports configuration of the transmitted stream. On-chip channel-status and user-bit buffering preserves metadata alongside the audio samples. The monolithic CMOS implementation combines the digital audio input, encoding, and output functions in one 28-TSSOP device.
Operation is clocked from the OMCK input according to the manufacturer datasheet. The encoded output is designed for direct connection to an appropriate connector or for coupling through a transformer. AES3 and IEC60958 compatibility provides a common digital-audio format for professional equipment, while S/PDIF support targets consumer audio products. EIAJ CP1201 compatibility broadens interoperability with compatible Japanese digital-audio interfaces.
Typical applications include AV receivers, DVD receivers, CD recorders, digital mixing consoles, professional audio equipment, consumer digital-audio products, and optical-transmission interfaces. Its standards support makes it useful when a system must transmit high-rate digital audio while retaining channel-status and user-bit information. Companion audio converters and codecs can supply the source signals, while isolation transformers or optical-transmitter assemblies handle the physical output path.
When implementing the device, verify input clocking, serial-data format, output-level requirements, and the intended transmission medium against the application schematic. The manufacturer pin-description table should be used directly for PCB routing and decoupling. Keep the digital-audio traces short, provide a continuous ground reference, and avoid routing the transmitted clock and data through areas with high switching currents.
This page combines the exact CS8406-DZZ package and interface information with practical implementation guidance, verified same-family alternatives, application mapping, and a specification comparison. These engineering views help buyers evaluate protocol compatibility, clock architecture, board layout, and source-device requirements before requesting a quote for the 28-TSSOP device.
Drop-in alternatifler için CS8406-DZZ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
CS8406-CZZ
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →CS8406-DZZ Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | Digital audio interface transmitter |
| Maximum Audio Sampling Rate | 192 kHz |
| Audio Channel Count | 2 channels |
| Supported Digital Audio Standard | AES3 |
| Supported IEC Digital Audio Standard | IEC60958 |
| Supported Consumer Digital Audio Standard | S/PDIF |
| Supported Japanese Digital Audio Standard | EIAJ CP1201 |
| Control Interface | 3-wire serial interface |
| Implementation | Monolithic CMOS |
| Encoding Method | Biphase mark encoding |
| Clock Source | OMCK input |
| Channel Status Buffer | On chip |
| User Bit Buffer | On chip |
| Paket | 28-pin TSSOP |
| Montaj Türü | Surface mount |
| Output Interface | Biphase-mark-encoded digital audio output |
CS8406-DZZ 28-pin tssop Pin Yapısı Kılavuzu
CS8406-DZZ (28-pin tssop paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: CS8406-DZZ.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
CS8406-DZZ için uygundur 6 uygulamas: AV and DVD Receiver Audio Output, Professional Digital Mixing Console, CD Recorder Digital Interface, Consumer Digital Audio Product, Optical Transmission Interface, Digital Audio Test and Measurement.
AV and DVD Receiver Audio Output
The CS8406-DZZ fits a digital-audio output stage in an AV receiver or DVD receiver because it supports two-channel S/PDIF transmission up to 192 kHz. Audio and control information from a source device can be multiplexed, biphase mark encoded, and routed through the transmitter output toward a connector or transformer. Its channel-status and user-bit buffers help preserve metadata carried with the samples. When designing this path, verify the source clock relationship to OMCK, confirm the receiver accepts the selected format, and account for transformer or connector requirements in the output network.
Önerilen
Professional Digital Mixing Console
The CS8406-DZZ can provide the standardized digital-audio transmit path in a professional mixing console or digital mixer. Its two-channel capability supports a stereo channel pair, while the 192 kHz rate supports high-resolution audio workflows. AES3 and IEC60958 compatibility allows transmission within professional digital-audio ecosystems, and the on-chip channel-status and user-bit buffers carry associated control information. Board designers should provide a stable OMCK source, maintain a continuous ground plane, and keep the encoded output away from switching-power and high-current return paths.
Önerilen
CD Recorder Digital Interface
The CS8406-DZZ suits a CD recorder or compact-disc transport interface that must transmit two-channel digital audio. The transmitter accepts digital audio and associated control information, multiplexes them, and generates a biphase-mark-encoded stream compatible with S/PDIF and related standards. Support for sampling rates through 192 kHz gives the design headroom for high-resolution recording workflows. Use the manufacturer timing and pin tables to establish OMCK relationships, and validate the selected output transformer or connector against the target recording equipment.
Önerilen
Consumer Digital Audio Product
The CS8406-DZZ can serve as the final digital-audio transmitter in a consumer stereo product that exchanges S/PDIF-compatible data. Its two-channel architecture and 192 kHz maximum rate cover conventional and high-resolution digital sources, while channel-status and user-bit buffering supports metadata transmission. The encoded output may feed a suitable cable, transformer, or optical-transmitter assembly, depending on the product architecture. Layout should minimize the encoded-output trace length, maintain uninterrupted ground references, and isolate the digital output path from noisy analog and switching sections.
Önerilen
Optical Transmission Interface
The CS8406-DZZ is suitable for driving the electronic input stage of an optical digital-audio transmitter. The IC produces the biphase-mark-encoded stream required by compatible S/PDIF and AES3 links, while an external optical-transmitter device handles conversion into light. This division allows the source-side IC to concentrate on digital encoding and metadata handling without requiring an integrated optical driver. Confirm the electrical output amplitude and timing against the chosen transmitter, and route the encoded signal as a controlled impedance trace over a continuous ground plane.
Önerilen
Digital Audio Test and Measurement
The CS8406-DZZ can be used in a digital-audio test fixture or interface-generation module that must transmit standards-compliant stereo data. Its support for AES3, IEC60958, S/PDIF, and EIAJ CP1201 allows one transmitter design to exercise several equipment interfaces, while the 192 kHz rate provides headroom for high-resolution test vectors. The 3-wire serial control interface supports configuration, and the OMCK input allows the timing architecture to be tied to a stable laboratory clock. Validate output level, rising-edge behavior, and metadata handling against each interface standard.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: CS8406-DZZ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | CS8406-CZZ |
|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic |
| Package | 28-pin TSSOP | 28-pin TSSOP |
| Maximum Sampling Rate | 192 kHz | 192 kHz |
| Audio Channels | 2 channels | 2 channels |
| AES3 Support | Supported | Supported |
| IEC60958 Support | Supported | Supported |
| S/PDIF Support | Supported | Supported |
| EIAJ CP1201 Support | Supported | Supported |
| Control Interface | 3-wire serial interface | 3-wire serial interface |
| Implementation | Monolithic CMOS | Monolithic CMOS |
| Clock Source | OMCK input | OMCK input |
Ana Farklılayıcılar
- Matches the same-family CS8406-CZZ on all published headline transmitter ratings (karşılaştırma:CS8406-CZZ)
- Provides exact ordering-code continuity for CS8406-DZZ designs (karşılaştırma:CS8406-CZZ)
Tasarım Notları
Use the manufacturer pin-description table for the exact CS8406-DZZ assignments and place input, output, supply, and ground connections according to the reference circuit. Route the biphase-mark-encoded output as a short, continuous trace over an uninterrupted ground plane. Keep the encoded output away from switch-node traces, inductors, and high-current return paths to reduce jitter and unwanted coupling.
Establish the OMCK relationship to the source audio clock before finalizing the board. The manufacturer documentation identifies OMCK as the transmitter clock, so the source device, clock divider, and transmitter must operate with compatible timing. Validate the complete path with an oscilloscope or protocol analyzer, checking transition quality, data validity, and channel-status or user-bit behavior at the intended sampling rate.
Do not treat every device advertised as a digital-audio transmitter as a drop-in replacement. A valid substitution for CS8406-DZZ must match the 28-TSSOP footprint, pin assignments, supply requirements, clock behavior, control register implementation, supported protocols, and output timing. Confirm the exact manufacturer ordering code because similar family names can differ in package, temperature range, lead finish, or production status.
Apply the supply and decoupling arrangement specified in the manufacturer application circuit. Place each bypass capacitor directly beside its associated supply or ground pin and use the shortest possible return path to the ground plane. Decoupling requirements should be verified against clock-noise and output-jitter measurements, especially when OMCK and encoded data are routed near switching regulators.
Uyumluluk Bilgisi
The manufacturer technical documentation identifies AES3, IEC60958, S/PDIF, and EIAJ CP1201 interface standards. RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification declarations for the exact CS8406-DZZ ordering code are not stated in the source material.