DG409DVZ - 4:1 CMOS Analog Multiplexer | Renesas
MPN: DG409DVZ ✓ AktifDG409DVZ Genel Bakış
An analog multiplexer is an interface IC that connects multiple signal sources to a shared amplifier, converter, or measurement channel. The DG409 belongs to the broader CMOS analog switch and multiplexer hierarchy, where digital address inputs select an analog path while an enable input determines whether that path is connected. Bidirectional channels permit signal flow in either direction, which makes the device useful for routing, sharing, and test systems.
Key features include a 4:1 selection ratio, two operating circuits, 100 ohm on-resistance, bidirectional channels, and TTL/CMOS-compatible decoding. The digital control interface uses three select inputs to address the active channel and one enable input for device gating. An internal voltage reference provides stable logic thresholds, allowing the address and enable signals to operate reliably with both TTL and CMOS logic families.
The monolithic CMOS implementation places eight switches, address decoding, threshold reference, and enable control into one integrated circuit. This arrangement reduces the number of external routing components while preserving a compact 16-TSSOP surface-mount footprint. Differential operation supports balanced signal pairs, while the same device architecture can implement single-ended multiplexing when the appropriate channels are wired for that function.
Typical uses include data acquisition systems, instrument signal routing, automated test equipment, industrial control interfaces, communication-channel selection, and precision measurement front ends. Differential routing is particularly useful when the selected pair carries a balanced sensor, amplifier, or converter channel that would benefit from matched signal paths.
Designers should verify the supply range, absolute maximum ratings, logic levels, channel configuration, and switching timing in the manufacturer datasheet before finalizing the PCB. Input and output signals must remain within the specified analog range, and the enable state should be controlled during power-up to prevent unwanted paths from being connected.
Drop-in alternatifler için DG409DVZ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
DG409DYZ-T
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
DG409DYZ
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
ADG409
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MAX409
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
DG409DVZ Özellikler
| Product Type | CMOS analog multiplexer |
| Multiplexer Configuration | Single 8-channel or differential 4-channel |
| Number of Circuits | 2 circuits |
| Selection Ratio | 4:1 |
| Number of Analog Switches | 8 switches |
| On-Resistance | 100 ohm |
| Channel Direction | Bidirectional |
| Logic Compatibility | TTL/CMOS compatible |
| Address Inputs | 3 binary select inputs |
| Enable Control | 1 enable input |
| Internal Logic Reference | Voltage reference for logic thresholds |
| İşletim Sıcaklığı Aralığı | -40°C to +85°C |
| Paket | 16-pin TSSOP |
| Montaj Türü | Surface mount |
| Technology | Monolithic CMOS |
DG409DVZ 16-pin tssop Pin Yapısı Kılavuzu
DG409DVZ (16-pin tssop paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: DG409DVZ.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
DG409DVZ için uygundur 6 uygulamas: Automated Test Equipment, Precision Data Acquisition, Industrial Sensor Multiplexing, Instrument Signal Routing, Communication Channel Selection, Power and Signal Monitoring.
Automated Test Equipment
The DG409DVZ is well suited to automated test systems that must route several measurement channels to shared instrumentation. According to the Renesas DG409 family description, three binary select inputs and one enable input allow the test controller to address a specific analog path, while eight bidirectional switches support single-ended or paired differential routing. Its 100 ohm on-resistance keeps insertion loss within reach for many medium-impedance test nodes, although precision divider networks must include that resistance in their accuracy calculation. The 16-pin TSSOP package also simplifies routing around dense tester backplanes. Use the manufacturer application circuit to connect the intended channels, and disable the mux during relay or fixture transitions to prevent two driven sources from being connected together.
Önerilen
Precision Data Acquisition
The DG409DVZ can consolidate four differential sensor or amplifier outputs into a shared converter input in a precision data-acquisition system. According to the Renesas DG409 product family information, its eight switches can be arranged as four differential channels, with three select inputs identifying the pair to connect. This topology reduces connector count and simplifies channel selection while preserving matched routing for balanced signals. The rated 100 ohm on-resistance must be weighed against the converter input impedance, settling time, and allowable gain error. Place the mux close to the acquisition circuitry when source distances are long, and provide a defined enable state during startup and calibration so that inactive channels cannot disturb the active measurement path.
Önerilen
Industrial Sensor Multiplexing
The DG409DVZ provides a practical way to route multiple industrial sensor outputs into one amplifier or controller channel. According to the Renesas DG409 family description, the device supports eight single-ended paths or four differential pairs and accepts TTL/CMOS-compatible address and enable logic. This makes it useful for temperature, pressure, strain, and process-control signals when a compact shared acquisition stage is needed. Its -40°C to +85°C operating range suits industrial equipment, but the selected signal amplitude must remain within the absolute maximum and analog input limits. Use a solid common-ground reference, avoid connecting outputs from independently powered sensors directly, and account for the 100 ohm switch resistance when calculating divider ratios and amplifier-input loading.
Önerilen
Instrument Signal Routing
The DG409DVZ can route multiple low-level instrument signals to a common amplifier, detector, or oscilloscope input while keeping the PCB compact. According to the Renesas DG409 product description, the eight bidirectional analog switches support flexible single-ended or differential arrangements, and the internal voltage reference establishes stable logic thresholds. The 100 ohm on-resistance is acceptable for many general-purpose instrumentation paths but can influence accuracy when the source impedance is high or the signal bandwidth is wide. Keep traces short, provide a low-impedance reference return, and evaluate switch capacitance and off-isolation against the required bandwidth. The enable input provides a convenient way to isolate the selected path during range changes or instrument calibration.
Önerilen
Communication Channel Selection
The DG409DVZ can select among multiple communication or control lines when a system needs to reduce the number of downstream receiver channels. According to the Renesas DG409 family description, three address inputs and an enable input provide direct digital control, while bidirectional switches permit routing in either direction. A four-channel differential arrangement can carry balanced communication pairs through a shared interface, helping conserve connector and PCB space. The 100 ohm switch resistance should remain small compared with the driven-line impedance, and signal slew rate must satisfy the switching specifications. For high-speed links, verify bandwidth, charge injection, off-isolation, and logic timing in the manufacturer datasheet rather than assuming general-purpose multiplexer performance is sufficient.
Önerilen
Power and Signal Monitoring
The DG409DVZ can bring several monitored voltage or current-related signals to a shared controller input in a compact monitoring system. According to the Renesas DG409 product overview, its bidirectional channels and selectable enable control simplify path management, while the 16-pin TSSOP package preserves board area. Designers should confirm that each monitored source tolerates the possible on-resistance path and that its voltage remains within the specified analog limits. The switch contribution to error becomes significant when the source impedance approaches the rated 100 ohm, so high-impedance sensing networks may require an amplifier with lower input impedance or a revised measurement strategy. Use the enable line to isolate channels during controller resets and avoid simultaneous connection of outputs that cannot tolerate shared drive.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: DG409DVZ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | DG409DYZ-T | DG409DYZ | ADG409 | MAX409 |
|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Analog Devices | Maxim Integrated |
| Package | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP |
| Product Type | CMOS analog multiplexer | CMOS analog multiplexer | CMOS analog multiplexer | CMOS analog multiplexer | CMOS analog multiplexer |
| Selection Ratio | 4:1 | 4:1 | 4:1 | 4:1 | 4:1 |
| Channel Configuration | Single 8-channel or differential 4-channel | Single 8-channel or differential 4-channel | Single 8-channel or differential 4-channel | Differential 4-channel | Differential 4-channel |
Ana Farklılayıcılar
- Supports both single-ended and differential operating arrangements (karşılaştırma:ADG409)
- Combines eight bidirectional switches with integrated digital decoding (karşılaştırma:MAX409)
- Maintains a 100 ohm rated on-resistance in a 16-pin TSSOP footprint (karşılaştırma:DG409DYZ)
Tasarım Notları
Treat the 100 ohm on-resistance as part of the source impedance when calculating channel attenuation and noise gain. For a high-impedance source, even a modest switch resistance can create a divider with the amplifier input resistance. Keep selected-channel traces short, use a nearby low-impedance reference return, and verify off-isolation, switch capacitance, and settling time against the operating bandwidth before using the DG409DVZ for precision or high-speed signals.
Do not connect two independently driven outputs through a selected channel, because the bidirectional switch can create a direct conflict between the sources. Use the enable input to isolate a path during resets, calibration, and relay transitions. Also keep every analog signal within the manufacturer's absolute maximum ratings, and account for power-up states in the system controller so that inactive inputs do not disturb the selected measurement or communication channel.
Place the DG409DVZ close to the shared amplifier, converter, or tester input to minimize trace capacitance and susceptibility to coupling. Route the three select inputs and enable signal away from sensitive analog paths, provide a continuous ground reference, and avoid long stubs beneath or beside the TSSOP pins. Differential pairs should follow the connection pattern in the manufacturer application diagram so that the switched configuration preserves the intended signal pairing.
Uyumluluk Bilgisi
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration is shown on the cited product pages. AEC-Q100 qualification is not applicable because the DG409 is an industrial interface IC rather than an automotive-qualified device.