ICS601G-01 - 156MHz Low-Phase-Noise Clock Multiplier | Renesas
MPN: ICS601G-01 ✓ AktifICS601G-01 Genel Bakış
A clock multiplier is a timing IC that generates an output clock from an input reference and can multiply that reference by a programmed integer ratio. Clock multipliers belong to the clock and timing IC hierarchy alongside phase-locked loops, dividers, buffers, and jitter attenuators. Their purpose is to produce a stable, higher-frequency timing signal while maintaining predictable phase relationships among the source, output, and any clock distribution network.
The ICS601G-01 emphasizes phase-noise performance and is described as a low-cost, high-performance clock synthesizer. The same device family is advertised as the lowest-phase-noise multiplier in its original product series and as a low-CMOS-power clock-multiplier option. These characteristics make it relevant to communications, data-conversion, networking, and test-and-measurement systems where clocking noise can propagate into modulation error, conversion accuracy, or timing margins.
A 16-TSSOP surface-mount package supports compact PCB layouts and automated assembly. The verified product data identifies a body width of 0.173 inches, equivalent to 4.40 mm. Compared with larger leaded packages, TSSOP reduces board area and shortens interconnect length, although careful layout remains necessary because an oscillator or multiplier can translate supply and reference noise directly into output phase noise.
Typical uses include generating a multiplied clock for high-speed serial links, synchronizing parallel data converters, driving low-skew clock trees, and producing a master clock for communications equipment. The device can also serve in clock-generation modules and laboratory instruments where a stable reference frequency must be converted into a higher-rate working clock.
When laying out this circuit, keep the reference and output paths short, place decoupling capacitors close to the supply pins, and route sensitive clock traces away from switching nodes. Confirm the supported input range, output ratio programming method, supply voltage, and load drive capability against the current manufacturer datasheet before releasing the layout.
This page combines manufacturer-family characteristics with distributor package data, drop-in sourcing variants, practical clock-tree design guidance, and a parameter-by-parameter comparison. Those engineering details help buyers evaluate the ICS601G-01 beyond the basic catalog description and identify the correct package suffix for an existing design.
Drop-in alternatifler için ICS601G-01 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
ICS601G-01IT
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
ICS601G-01T
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
ICS601G-01ILF
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
601G-01LF
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
ICS601G-01 Özellikler
| Fonksiyon | Clock multiplier and clock synthesizer |
| Azami Saat Hızı | 156 MHz |
| Multiplication Ratio | 1 to 5 |
| Çıkış Sayısı | 1 |
| Phase Noise | Low phase noise |
| Jitter | Low jitter |
| Clock Skew | Low skew |
| Process Technology | CMOS |
| Paket | 16-TSSOP |
| Package Body Width | 0.173 in (4.40 mm) |
| Montaj Türü | Surface Mount |
ICS601G-01 0.173 in (4.40 mm) Pin Yapısı Kılavuzu
ICS601G-01 (0.173 in (4.40 mm) paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: ICS601G-01.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
ICS601G-01 için uygundur 6 uygulamas: Communications Clock Generation, ADC and DAC Clocking, Networking and Interface Timing, Low-Skew Fanout and Synchronization, Test and Measurement Instruments, Industrial Control and Embedded Timing.
Communications Clock Generation
The ICS601G-01 fits communications modules that derive a higher-rate working clock from a stable reference. Its maximum catalog frequency of 156 MHz and 1-to-5 multiplication range allow a 156 MHz output to be produced from a lower reference when the required ratio is supported. Low phase noise and low jitter help preserve signal integrity in transmitter and receiver chains. Place the device close to the reference source, keep the clock route compact, and confirm that the selected output drive meets the receiver and fanout requirements listed in the manufacturer data.
Önerilen
ADC and DAC Clocking
The ICS601G-01 can supply a multiplied clock for data converters whose sampling rate exceeds the available system reference. A ratio between 1 and 5 provides a practical way to increase clock frequency while maintaining a fixed relationship to the source. The low-phase-noise and low-jitter characteristics are valuable because converter performance is directly influenced by clock quality. Route the output directly toward the converter clock input and keep return-path discontinuity and switching-node coupling away from the clock trace.
Önerilen
Networking and Interface Timing
The ICS601G-01 is applicable to interface and networking subsystems that need a low-skew clock derived from a common reference. Multiplying the reference rather than distributing several unrelated oscillators can help preserve timing relationships across a board. Its one-output architecture is appropriate when a single multiplied clock is subsequently fanned out by dedicated clock devices. Confirm input sensitivity, output drive, and maximum operating frequency in the manufacturer electrical table before using it as the master timing source.
Önerilen
Low-Skew Fanout and Synchronization
The ICS601G-01 can serve as the upstream multiplier for a low-skew fanout network in test equipment, industrial controllers, or processor subsystems. By deriving multiple downstream clocks from one multiplied reference, the design maintains a defined phase relationship and reduces the number of independent oscillators. The device should be placed at the distribution point, with short symmetric routes to fanout devices. Include adequate supply decoupling and preserve a continuous ground reference beneath the clock region.
Önerilen
Test and Measurement Instruments
The ICS601G-01 is useful in laboratory and test instruments that need a deterministic higher-frequency clock from a precision external reference. The low-phase-noise behavior supports measurements involving sensitive analog and digital circuitry, while the compact 16-TSSOP package simplifies front-panel and modular instrument layouts. Use a short input connection and isolate the multiplier from high-power output stages. Validate clock amplitude and edge shape at the load before relying on it as the sole time base.
Önerilen
Industrial Control and Embedded Timing
The ICS601G-01 can multiply a stable controller reference to create a higher-rate clock for communications ports, storage interfaces, or high-speed counter blocks. The 1-to-5 ratio keeps the architecture straightforward compared with a programmable fractional PLL. Because this device is not itself a general-purpose processor clock generator, verify the downstream circuit's required frequency, duty-cycle tolerance, and load drive. A controlled reference and a quiet power supply are essential for maintaining low phase noise.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: ICS601G-01 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | ICS601G-01IT | ICS601G-01T | ICS601G-01ILF | 601G-01LF |
|---|---|---|---|---|---|
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Function | Clock multiplier and clock synthesizer | Clock multiplier | Clock multiplier | Clock multiplier | Low-phase-noise 1-to-5 clock multiplier |
| Multiplication Ratio | 1 to 5 | 1 to 5 | 1 to 5 | 1 to 5 | 1 to 5 |
| Phase Noise | Low phase noise | Low phase noise | Low phase noise | Low phase noise | Low phase noise |
| Jitter | Low jitter | Low jitter | Low jitter | Low jitter | Low jitter |
| Process Technology | CMOS | CMOS | CMOS | CMOS | CMOS |
| Mounting Type | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount |
Ana Farklılayıcılar
- Low-phase-noise integer clock multiplication (karşılaştırma:ICS601G-01IT)
- Compact 16-TSSOP clock implementation (karşılaştırma:ICS601G-01ILF)
- Single-output architecture suited to clock-tree design (karşılaştırma:601G-01LF)
Tasarım Notları
Keep the reference input and clock output routes short and impedance controlled. Place the device close to the oscillator or upstream clock source, and avoid routing the output near switching regulators, relay drivers, or high-current edges. A continuous ground plane beneath the clock section reduces return-path discontinuity, while short decoupling connections between supply pins and capacitors help prevent supply noise from becoming phase noise.
Confirm the output amplitude, duty cycle, and load-drive capability at the actual receiver rather than assuming the catalog maximum frequency is sufficient for the design. Leave the clock destination properly terminated and keep fanout loading within the device's specified range. When the output drives a cable, buffer, or long PCB route, add an appropriate clock driver instead of relying on the multiplier to absorb excessive capacitance.
Do not treat the base MPN and its ordering suffixes as automatically interchangeable in every BOM. Although the related variants use the same 16-TSSOP format and retain the clock-multiplier function, suffix-specific temperature, qualification, packing, and delivery conditions must match the assembly requirements. Verify the exact ordering table, selected ratio, and manufacturer application circuit before releasing production documentation.
Uyumluluk Bilgisi
The available product records identify the clock multiplier, frequency, package, and family characteristics but do not explicitly state RoHS, REACH, halogen-free, or conflict-minerals status. Verify environmental and material compliance using the current manufacturer product documentation.