Microchip Technology

KSZ8851-16MLLI - 10/100 Ethernet Controller | Microchip Technology

MPN: KSZ8851-16MLLI ✓ Aktif
3.3 V Vdss 48-LQFP, 7 x 7 mm Package 10 Mbps to 100 Mbps Speed
MOQ: 1 |

KSZ8851-16MLLI Genel Bakış

Microchip Technology KSZ8851-16MLLI is a single-port 10/100 Base-T Ethernet MAC controller with an integrated 10/100 Base-T/TX PHY, a generic 8-bit or 16-bit non-PCI host interface, and a 48-LQFP 7 x 7 mm package. The integrated controller and PHY combination supports cost-effective, high-throughput Ethernet connectivity for traditional embedded systems that do not require a PCI interface.

An Ethernet MAC controller is a network-interface semiconductor that manages frame transmission, reception, addressing, and the host-side data path between an embedded processor and an Ethernet network. By integrating the MAC and physical-layer functions, the KSZ8851 reduces external PHY count, board area, and implementation effort while supporting the established IEEE 802.3 Ethernet framework.

The device supports 10 Mbps and 100 Mbps operation through its 10/100 Base-T/TX PHY. Its generic non-PCI interface can operate as an 8-bit or 16-bit host bus, allowing integration with embedded processors, microcontrollers, and programmable logic that do not implement a PCI controller. The industrial-grade MLLI ordering option is offered in the same 48-LQFP package used by related KSZ8851 variants.

The KSZ8851 family provides multiple interface widths and package configurations, including 8-, 16-, and 32-bit versions, allowing design reuse across embedded platforms. Its integrated analog receive and transmit circuitry is intended to support physical-layer signal transmission and reception while the MAC subsystem manages packet-level communication with the host processor.

Typical applications include industrial automation equipment, embedded control systems, factory monitoring terminals, networked sensors, building-automation controllers, and compact communication gateways. A typical design connects the host bus to the KSZ8851, routes the controller through an RJ45 magnetics section, and uses magnetic or non-magnetic Ethernet physical-interface components appropriate to the board environment.

When laying out the board, keep the Ethernet differential pairs short, impedance-controlled, and isolated from noisy digital and switching-power paths. Follow the manufacturer’s recommended decoupling, clock, reset, and magnetics-layout guidance because PHY signal integrity and clock jitter directly affect link reliability, packet errors, and the ability to establish a stable 100 Mbps connection.

This page combines the manufacturer interface description, package and speed characteristics, sourcing structure, practical PCB guidance, and an application-oriented comparison with verified KSZ8851 ordering options. It also distinguishes true same-footprint alternatives from package variants that would require a PCB redesign.

Drop-in alternatifler için KSZ8851-16MLLI — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller KSZ8851-16MLLI (aynı form faktörü ve ayağa oturma) — farklı olan Host Interface, Package, Ethernet Speed, AEC-Q100 Qualification, Device Type.

Microchip Technology
Host Interface: 8-bit or 16-bit generic non-PCI parallel interface
Package: 48-LQFP (7 mm x 7 mm)
Ethernet Speed: 10/100 Mb/s
İle Karşılaştır KSZ8851-16MLLI →
Microchip Technology
Host Interface: 16-bit parallel non-PCI
Package: 48-LQFP, 7 mm x 7 mm
Ethernet Speed: 10/100 Mb/s
İle Karşılaştır KSZ8851-16MLLI →

KSZ8851-16MLL

✅ Yerleştirme
📦 48-LQFP (7x7 mm)
Same 10/100 Mbps PHY, 8/16-bit non-PCI interface, 48-LQFP footprint, and 0% change to those stated core ratings; temperature-grade ordering attributes differ.

📋 Katalogda Olmayan Referans Alternatifi

KSZ8851-16MLLJ

✅ Yerleştirme
Microchip Technology
📦 48-LQFP (7x7 mm)
Single-port Ethernet MAC controller with integrated PHY · 10/100 Mb/s · 10/100 Base-T/TX PHY · 8-bit or 16-bit generic non-PCI parallel interface · Dynamic memory pointer · 48-LQFP (7 mm x 7 mm) · 48-pin lead-free LQFP · Surface Mount

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

KSZ8851-16MLLU

✅ Yerleştirme
Microchip Technology
📦 48-LQFP (7x7 mm)
Single-port Ethernet MAC controller with integrated PHY · 10/100 Mb/s · 16-bit parallel non-PCI · 48-LQFP, 7 mm x 7 mm · 1.8 V, 2.5 V, or 3.3 V · Applicable IEEE 802.3 standards · AEC-Q100 qualified · Automotive grade

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

KSZ8851-16MLLI Özellikler

Device Type Single-port Ethernet MAC controller with integrated 10/100 Base-T/TX PHY
Ethernet Speed 10 Mbps to 100 Mbps
Host Interface 8-bit or 16-bit generic non-PCI CPU interface
Besleme Gerilimi 3.3 V
Paket 48-LQFP, 7 x 7 mm
Pin Sayısı 48 pins
Montaj Türü Surface mount
Temperature Grade Industrial grade
Ethernet Compliance IEEE 802.3
Physical Layer 10/100 Base-T/TX PHY
Number of Ethernet Ports 1 port
Host Bus Type Generic non-PCI CPU interface
AEC-Q100 Qualification Not qualified; automotive qualification is identified for the KSZ8851-16MLLU

KSZ8851-16MLLI 48-lqfp, 7 x 7 mm Pin Yapısı Kılavuzu

KSZ8851-16MLLI (48-lqfp, 7 x 7 mm paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

48-lqfp, 7 x 7 mm paket pin çizelgesi için KSZ8851-16MLLI

Ayrıntılı pin çıkış verisi mevcut değil: KSZ8851-16MLLI.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

KSZ8851-16MLLI için uygundur 6 uygulamas: Industrial Automation Controller, Factory Monitoring Terminal, Networked Sensor Gateway, Building Automation Controller, Embedded Communication Gateway, Embedded Network Interface Expansion.

🏭

Industrial Automation Controller

The KSZ8851-16MLLI fits industrial automation controllers that require 10/100 Ethernet without a PCI interface. Its integrated MAC and 10/100 Base-T/TX PHY reduce the number of network components, while the 8-bit or 16-bit generic host bus can connect to an embedded processor or microcontroller. The industrial-temperature-grade ordering option suits equipment operating in a factory environment. Design the host bus for deterministic timing, isolate the Ethernet differential pairs from motor-control traces, and follow the manufacturer’s recommended magnetics and decoupling layout.

📺

Factory Monitoring Terminal

The KSZ8851-16MLLI can add wired Ethernet connectivity to a monitoring terminal, data logger, or environmental controller. Supporting both 10 Mbps and 100 Mbps allows the equipment to share a plant network with common Ethernet infrastructure, while the integrated PHY simplifies the analog-side implementation. The parallel non-PCI interface avoids requiring a PCI controller in a compact embedded design. Route the differential pair through the recommended Ethernet magnetics, provide a solid ground reference, and validate the completed board across representative cable lengths and link speeds.

🧩

Networked Sensor Gateway

The KSZ8851-16MLLI is suitable for a compact sensor gateway that aggregates local measurements and forwards them over Ethernet. Its 10/100 Base-T/TX PHY supports links from 10 Mbps to 100 Mbps, providing compatibility with both legacy and faster network segments. The generic 8-bit or 16-bit interface allows an embedded host to exchange frames without a PCI bus. Because sensor nodes often share power and signal paths with motors or relays, maintain physical separation between Ethernet pairs and noisy sources and use the manufacturer’s initialization procedure for stable PHY operation.

🏠

Building Automation Controller

The KSZ8851-16MLLI can provide wired connectivity for building-automation controllers, HVAC interfaces, and room-control equipment. The integrated Ethernet MAC and PHY streamline a compact controller that must communicate management data over a standard 10/100 network. Its non-PCI host interface works well with embedded processors that lack dedicated Ethernet peripherals. The controller must be paired with a correctly designed Ethernet coupling or magnetics network, and clock, reset, and initialization should follow the manufacturer’s published procedure for reliable frame reception and transmission.

🌐

Embedded Communication Gateway

The KSZ8851-16MLLI is appropriate for embedded gateways that translate between a local processor and standard 10/100 Ethernet infrastructure. It combines the packet controller and PHY while exposing a flexible parallel bus to the embedded host, allowing designs to avoid a PCI subsystem. Operation at both 10 Mbps and 100 Mbps provides flexibility across installed networks. For gateways with multiple power domains or long enclosure runs, use isolated communication methods where required and keep the PHY differential routing short, balanced, and separated from high-current switching paths.

🔧

Embedded Network Interface Expansion

The KSZ8851-16MLLI can add Ethernet to an embedded platform that has a processor bus but no suitable network controller. Its 8-bit or 16-bit generic interface supports straightforward host integration, and the integrated 10/100 PHY reduces connector count and board area compared with a discrete MAC-plus-PHY arrangement. The 48-LQFP footprint supports compact board layouts when routed according to the manufacturer’s reference design. Confirm host-bus timing and supply levels in the datasheet, then validate startup, reset behavior, and packet transfer before production release.

Önerilen Ürünler Özeti

KSZ8851-16MLL-EVAL Evaluation platform for the non-PCI host interface Kullanıldığı Yer: Industrial Automation Controller, Factory Monitoring Terminal, Networked Sensor Gateway, Building Automation Controller, Embedded Communication Gateway, Embedded Network Interface Expansion KSZ8851-16MLLI-TR Tape-and-reel ordering option Kullanıldığı Yer: Industrial Automation Controller, Building Automation Controller KSZ8851-16MLLJ Microchip Technology Kullanıldığı Yer: Factory Monitoring Terminal, Embedded Communication Gateway KSZ8851-16MLL Related 48-LQFP controller ordering option Kullanıldığı Yer: Networked Sensor Gateway, Embedded Network Interface Expansion
What is the KSZ8851-16MLLI?
The KSZ8851-16MLLI is a Microchip Technology single-port Ethernet MAC controller with an integrated 10/100 Base-T/TX PHY and an 8-bit or 16-bit generic non-PCI host interface. According to the Microchip KSZ8851-16MLL datasheet DS00002357B, the device is intended for cost-effective, high-throughput Ethernet connectivity in traditional embedded systems. It is packaged in a 48-LQFP measuring 7 x 7 mm.
What Ethernet speeds does the KSZ8851-16MLLI support?
The KSZ8851-16MLLI supports 10 Mbps and 100 Mbps Ethernet operation through its integrated 10/100 Base-T/TX PHY. According to the Microchip KSZ8851-16MLL datasheet DS00002357B, the physical layer is designed for IEEE 802.3-compliant communication. The integrated PHY reduces the component count and board area normally required by a separate Ethernet MAC and external 10/100 PHY arrangement.
Which processor interfaces work with the KSZ8851-16MLLI?
The KSZ8851-16MLLI provides an 8-bit or 16-bit generic non-PCI CPU interface rather than a PCI bus. This makes it suitable for embedded processors, industrial controllers, microcontrollers, and other hosts that expose a parallel host bus but do not include PCI hardware. The manufacturer describes the KSZ8851 family as supporting SPI and 8-, 16-, or 32-bit non-PCI CPU interfaces across its available configurations.
Where can I download the KSZ8851-16MLLI datasheet PDF?
The official KSZ8851-16MLLI datasheet PDF is available from Microchip Technology at the product-document URL ending in DS00002357B.pdf. The document describes the KSZ8851-16MLL family, including its single-port Ethernet MAC, integrated 10/100 Base-T/TX PHY, generic host interface, electrical characteristics, register organization, and application information. Use the manufacturer PDF for authoritative pin assignments and initialization procedures.
Where can I find the KSZ8851-16MLLI pinout?
The KSZ8851-16MLLI pinout is published in the manufacturer’s KSZ8851-16MLL datasheet DS00002357B. Because this 48-LQFP device mixes the host bus, PHY, clocks, supplies, and control signals, assign PCB nets directly from the package pin table and cross-check them against the selected symbol. The manufacturer also publishes the KSZ8851-16MLL evaluation-board user guide for a practical non-PCI host-interface example.
Is the KSZ8851-16MLLI suitable for industrial Ethernet equipment?
Yes, the KSZ8851-16MLLI is an industrial-temperature-grade option in the 48-LQFP KSZ8851 family, making it appropriate for industrial equipment that requires a 10/100 Ethernet interface and a non-PCI host bus. Its integrated MAC and PHY simplify board design. For automotive systems, select the manufacturer’s specifically AEC-Q100-qualified ordering option rather than assuming that the MLLI industrial variant is automotive qualified.
What can replace the KSZ8851-16MLLI?
The closest same-footprint choices are the KSZ8851-16MLL, KSZ8851-16MLLJ, and KSZ8851-16MLLU, all listed for the 48-LQFP 7 x 7 mm KSZ8851 controller family. Their suitability depends on the required temperature grade, qualification, and production ordering code. The KSZ8851-16MQLI is not a drop-in alternative because it uses a 128-PQFP package and therefore requires a different PCB footprint.
What is the difference between the KSZ8851-16MLLI and KSZ8851-16MLLU?
The primary documented distinction is qualification and temperature grade. The KSZ8851-16MLLI is the industrial-temperature-grade ordering option, while the manufacturer identifies the KSZ8851-16MLLU as the AEC-Q100-qualified automotive version. Both belong to the 48-LQFP KSZ8851 controller family with the same 8-bit or 16-bit non-PCI interface and integrated 10/100 PHY.
KSZ8851-16MLLI vs KSZ8851-16MLLJ: which should I select?
Choose the KSZ8851-16MLLI when your design calls for the industrial-temperature-grade ordering option. Select the KSZ8851-16MLLJ only after confirming its exact ordering attributes and environmental requirements against the manufacturer’s current datasheet and product documentation. Both use the 48-LQFP 7 x 7 mm package, but suffix differences can represent different temperature, qualification, or production-code requirements.
When should I choose the KSZ8851-16MLLI instead of the KSZ8851-16MQLI?
Choose the KSZ8851-16MLLI when a 48-LQFP 7 x 7 mm implementation and 8-bit or 16-bit non-PCI host interface are required. The KSZ8851-16MQLI supports a wider 8-, 16-, or 32-bit interface but uses a 128-PQFP 14 x 20 mm package. It is not a drop-in replacement because its package has different dimensions, lead arrangement, and pin count.
How do I initialize the KSZ8851 Ethernet controller?
Initialize the KSZ8851 by following the manufacturer’s KSZ8851MLL Step-by-Step Procedure v1.5 and the register descriptions in datasheet DS00002357B. The procedure identifies the required register values, initialization sequence, transmit setup, and receive setup. Avoid reproducing an unofficial register script because clock configuration, reset release, host timing, and PHY setup must match the hardware design.
What is the KSZ8851-16MLLI power-supply requirement?
The KSZ8851-16MLLI operates from a 3.3 V supply, while the separate core I/O supply requirement must be confirmed from the manufacturer datasheet. Decouple each applicable supply rail close to the device and follow the datasheet’s recommended capacitor values and placement. Exact voltage tolerances, current consumption, and internal regulator behavior should be checked in DS00002357B before final schematic release.
How should the Ethernet PCB layout be designed for the KSZ8851-16MLLI?
Route the Ethernet differential pairs as short, continuous, impedance-controlled nets with symmetrical geometry and minimal stubs. Keep the controller, PHY-support components, and magnetics interface close together while separating the pairs from clocks, switching regulators, and high-current digital paths. Follow the manufacturer evaluation-board layout as a reference and keep decoupling connections compact to reduce supply noise and packet-error risk.
Where can I buy the KSZ8851-16MLLI and check its lead time?
Use the “Request a Quote” form on this page to request current availability, volume pricing, and lead time for the KSZ8851-16MLLI. Quote requests should include the required quantity, 48-LQFP ordering code, target date, and whether tape-and-reel or another delivery format is needed. The form provides a single direct route for current commercial terms without relying on stale listing information.
Does the KSZ8851-16MLLI include a separate Ethernet PHY?
No separate PHY is required for the specified 10/100 Base-T/TX implementation because the KSZ8851-16MLLI integrates the MAC and physical layer in one device. The board still needs the appropriate Ethernet magnetics or coupling network and connector implementation, plus the external passives and layout required by the reference circuit. The integrated PHY supports both 10 Mbps and 100 Mbps operation.

Mühendislik referans verileri: KSZ8851-16MLLI — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the KSZ8851-16MLLI for industrial embedded systems requiring a single 10/100 Ethernet port, an integrated PHY, and an 8-bit or 16-bit non-PCI host bus in a compact 48-LQFP package. Select the KSZ8851-16MLLU when the design specifically requires the manufacturer’s AEC-Q100-qualified automotive version and otherwise uses the same 48-LQFP family interface. The KSZ8851-16MLL and KSZ8851-16MLLJ remain same-footprint choices, but their exact temperature and production ordering attributes must be confirmed before substitution. Do not use the KSZ8851-16MQLI as a drop-in part: its 128-PQFP package requires a different footprint, layout, and pin assignment. For any candidate, verify the complete ordering code, host-bus timing, supply requirements, PHY magnetics, and initialization procedure against the manufacturer datasheet.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün KSZ8851-16MLL KSZ8851-16MLLJ KSZ8851-16MLLU
Package 48-LQFP (7x7 mm) 48-LQFP (7x7 mm) 48-LQFP (7x7 mm) 48-LQFP (7x7 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Ethernet Speed 10 Mbps to 100 Mbps 10 Mbps to 100 Mbps 10 Mbps to 100 Mbps 10 Mbps to 100 Mbps
Physical Layer Integrated 10/100 Base-T/TX PHY Integrated 10/100 Base-T/TX PHY Integrated 10/100 Base-T/TX PHY Integrated 10/100 Base-T/TX PHY
Host Interface 8-bit or 16-bit generic non-PCI interface 8-bit or 16-bit generic non-PCI interface 8-bit or 16-bit generic non-PCI interface 8-bit or 16-bit generic non-PCI interface
Ethernet Port Count 1 port 1 port 1 port 1 port

Ana Farklılayıcılar

  • Integrated MAC and 10/100 PHY (karşılaştırma:KSZ8851-16MQLI)
  • Industrial-grade ordering option in a compact package (karşılaştırma:KSZ8851-16MLLU)
  • Flexible parallel non-PCI host access (karşılaştırma:KSZ8851-16MQLI)

Tasarım Notları

Treat the Ethernet differential pair as a controlled-impedance structure rather than two ordinary digital nets. Route the pair as short and continuous as possible, maintain consistent spacing and length relationship, avoid stubs, and reference the manufacturer evaluation-board layout. Keep the pair away from switching-regulator switches, high-current motor traces, clock-generating circuitry, and PCB mounting hardware that can disturb the magnetic and electric fields around the PHY.

Place the KSZ8851-16MLLI’s decoupling capacitors and the Ethernet magnetics interface components close to their associated pins and in the order recommended by the manufacturer datasheet. Keep the controller’s supply return path compact and electrically continuous, and route the host-bus traces away from sensitive PHY and clock nets. Validate signal integrity with the intended processor, cable, connector, and magnetics components rather than relying only on schematic connectivity.

Do not substitute the KSZ8851-16MQLI for the KSZ8851-16MLLI without redesigning the PCB: the MQLI uses a 128-PQFP 14 x 20 mm package rather than a 48-LQFP 7 x 7 mm package. Likewise, verify whether a suffix change represents temperature grade, qualification, or production-code requirements. Use the manufacturer’s KSZ8851MLL Step-by-Step Procedure v1.5 for register initialization instead of relying on an unofficial boot script.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The manufacturer identifies the KSZ8851-16MLLI as an industrial-temperature-grade version and the KSZ8851-16MLLU as the qualified automotive version. Other environmental and material compliance attributes are not stated and remain unknown.

Veri doğrulanma tarihi: 2026-11-18 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

ksz8851 16mlli ksz8851 16mll ksz8851 datasheet ksz8851 eval board ksz8851 pdf ksz8851 16mql microchip ksz8851 micrel ksz8851 KSZ8851-16MLLI pinout KSZ8851-16MLLI replacement KSZ8851-16MLLI vs KSZ8851-16MQLI KSZ8851-16MLLI price KSZ8851-16MLLI application circuit

İlgili Bileşenler ve Terimler

Microchip Technology KSZ8851-16MLLI KSZ8851-16MLL KSZ8851-16MLLJ KSZ8851-16MLLU KSZ8851-16MQLI KSZ8851-16MLL-EVAL Ethernet MAC controller Ethernet PHY 10/100 Base-T/TX IEEE 802.3 generic non-PCI CPU interface 8-bit CPU interface 16-bit CPU interface 48-LQFP QFN family LQFP package family surface mount industrial temperature grade AEC-Q100 industrial automation networked sensor gateway building automation controller Ethernet differential pair
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle