LAN8720AI-CP-TR-ABC - 10/100 RMII Ethernet PHY | Microchip
MPN: LAN8720AI-CP-TR-ABC ✓ AktifLAN8720AI-CP-TR-ABC Genel Bakış
An Ethernet PHY is the physical-layer component that converts digital frame data into differential Ethernet signaling and receives differential network signals for conversion back into digital data. The LAN8720AI belongs to the Ethernet transceiver hierarchy and the broader integrated-circuit category of network interface ICs. Its RMII interface reduces the number of host signals required for 10/100 Ethernet connectivity, while Full MII support provides an alternative host interface for designs using the wider parallel bus.
Key features include automatic speed and duplex negotiation, HP Auto-MDIX support, IEEE 802.3-2005 compliant and vendor-specific register functions, and Microchip flexPWR technology. Auto-negotiation automatically establishes the best supported speed and duplex mode. HP Auto-MDIX allows direct-connect or crossover Ethernet cables without a manual crossover switch, simplifying connections to computers, switches, and test equipment.
The LAN8720AI family operates from 1.8 V, 2.5 V, or 3.3 V supply levels, allowing integration with both 3.3 V and compatible lower-voltage embedded systems. The industrial-order option supports -40°C to +85°C operation, while the related commercial option supports 0°C to +85°C. The 24-SQFN package includes an exposed thermal pad and is supplied on a 4,000-piece reel for the listed ordering configuration.
Typical applications include industrial Ethernet controllers, embedded Linux systems, factory automation equipment, serial-to-Ethernet gateways, IoT gateways, and compact network appliances. In each case, the PHY supplies the physical Ethernet connection while the host controller handles higher-layer networking, packet processing, and application protocols. RMII is especially useful where connector count and PCB area are constrained.
Designers should follow the manufacturer datasheet for the complete pin-description table, recommended crystal and decoupling circuits, RMII timing requirements, and exposed-pad land pattern. Validate the PHY and host clocking arrangement, magnetics, termination, and cable path as a complete Ethernet interface rather than evaluating the transceiver independently of its external network components.
This page consolidates the manufacturer interface capabilities, package and temperature distinctions, order-code behavior, and practical replacement guidance into an engineering-focused comparison of the LAN8720AI-CP-TR-ABC and compatible Ethernet PHY options.
Drop-in alternatifler için LAN8720AI-CP-TR-ABC — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller LAN8720AI-CP-TR-ABC (aynı form faktörü ve ayağa oturma) — farklı olan Package, Host Interface, Product Type, Auto-Negotiation, Auto-MDIX.
LAN8720AI-CP-TR
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
LAN8720AI-CP-ABC
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LAN8720A-CP-TR
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LAN8720A-CP-TR-ABC
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →KSZ8721SLI-TR
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LAN8720AI-CP-TR-ABC Özellikler
| Product Type | 10/100 Ethernet PHY transceiver |
| Supported Ethernet Speeds | 10 Mbps and 100 Mbps |
| Host Interface | Full MII and RMII |
| Number of Transceivers | 2/2 |
| Supply Voltage Options | 1.8 V, 2.5 V, and 3.3 V |
| İşletim Sıcaklığı Aralığı | -40°C to +85°C |
| Paket | 24-SQFN, 4 x 4 mm |
| Package Type | 24-pin QFN with exposed pad |
| Montaj Türü | Surface mount |
| Reel Quantity | 4,000 pieces |
| Auto-Negotiation | Automatic speed and duplex negotiation |
| Auto-MDIX | HP Auto-MDIX supported |
| Ethernet Standard | IEEE 802.3-2005 compliant |
| Low-Power Technology | Microchip flexPWR |
| Lead-Free Status | Lead-free package |
| RoHS Durumu | Compliant |
| Halogen Compliance | Meets IEC 61249-2-21 maximum concentration values |
LAN8720AI-CP-TR-ABC 24-pin qfn with exposed pad Pin Yapısı Kılavuzu
LAN8720AI-CP-TR-ABC (24-pin qfn with exposed pad paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: LAN8720AI-CP-TR-ABC.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
LAN8720AI-CP-TR-ABC için uygundur 6 uygulamas: Industrial Ethernet Controller, IoT Gateway, Serial-to-Ethernet Gateway, Embedded Linux Network Appliance, Factory Automation Sensor Hub, Networked Test and Measurement Instrument.
Industrial Ethernet Controller
The LAN8720AI-CP-TR-ABC is appropriate for industrial controllers that add a 10/100 Ethernet link while operating across -40°C to +85°C. It supports Full MII and RMII host connections, allowing the controller designer to select a lower-pin-count interface when board area is constrained. Its 24-SQFN, 4 x 4 mm package also preserves space for sensors, isolation, and expansion interfaces. The device handles physical-layer signaling, automatic speed and duplex negotiation, and HP Auto-MDIX, while the host processor runs the network stack and application logic.
Önerilen
IoT Gateway
The LAN8720AI-CP-TR-ABC gives a compact IoT gateway a wired Ethernet uplink without requiring a large connector and magnetics area. Its RMII option reduces host wiring relative to Full MII, while automatic speed and duplex negotiation allows the gateway to connect to common 10/100 switches and computers. HP Auto-MDIX also permits direct-connect or crossover cables. The -40°C to +85°C industrial range supports equipment deployed in factories, buildings, and outdoor enclosures, provided the complete interface passes thermal, isolation, and EMC validation.
Önerilen
Serial-to-Ethernet Gateway
A serial-to-Ethernet gateway can use the LAN8720AI-CP-TR-ABC as the physical-layer element beneath an embedded Ethernet stack. The 10/100 Mbps capability is appropriate for supervisory data, configuration access, telemetry, and legacy serial-device bridging rather than high-bandwidth storage traffic. The compact 24-SQFN package is valuable inside DIN-rail or enclosure-mounted products, and the industrial temperature option supports wider deployed environments. Ethernet magnetics, pulse-transformer isolation, connector layout, and grounding remain essential parts of the final network port.
Önerilen
Embedded Linux Network Appliance
The LAN8720AI-CP-TR-ABC can provide the wired physical layer for an embedded Linux appliance that also uses a local serial console, USB storage, or display. RMII offers a practical connection to application processors requiring fewer host signals than Full MII, and the 4 x 4 mm QFN package leaves routing space for memory and storage. Auto-negotiation and HP Auto-MDIX shorten installation time by accommodating common switch and direct-cable arrangements. Firmware must configure the PHY address, strap options, clocking, and network interface before the host brings up its Ethernet stack.
Önerilen
Factory Automation Sensor Hub
The LAN8720AI-CP-TR-ABC fits sensor hubs that aggregate readings from industrial sensors and expose them through a 10/100 Ethernet management port. Its -40°C to +85°C range aligns with many factory environments, while RMII allows an embedded MCU to connect to the PHY with a reduced signal count. The small 4 x 4 mm package helps when the hub includes several analog channels, digital I/O, and local display drivers. Care should be taken to isolate communication ports, maintain the Ethernet differential-impedance layout, and keep switching regulators and sensors away from sensitive network nodes.
Önerilen
Networked Test and Measurement Instrument
The LAN8720AI-CP-TR-ABC can add remote control and data transfer to compact test and measurement equipment. A 10/100 Ethernet link is suitable for configuration downloads, status monitoring, and moderate-rate result transfers, while HP Auto-MDIX simplifies direct connection to a laptop or test controller. The compact QFN footprint is helpful in handheld and bench-top products, while the industrial temperature option broadens the usable environment. The design should provide clean references, correct clocking, Ethernet magnetics, and careful isolation between external network cabling and sensitive analog measurement circuitry.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: LAN8720AI-CP-TR-ABC — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | LAN8720AI-CP-TR | LAN8720AI-CP-ABC | LAN8720A-CP-TR | KSZ8721SLI-TR |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 24-SQFN, 4 x 4 mm | 24-SQFN, 4 x 4 mm | 24-SQFN, 4 x 4 mm | 24-SQFN, 4 x 4 mm | 24-QFN, 4 x 4 mm |
| Supported Speeds | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps |
| Host Interface | Full MII and RMII | Full MII and RMII | Full MII and RMII | Full MII and RMII | RMII |
Ana Farklılayıcılar
- Industrial temperature coverage (karşılaştırma:LAN8720A-CP-TR)
- Direct industrial same-family configuration (karşılaştırma:LAN8720A-CP-TR-ABC)
- Compact wired-network interface (karşılaştırma:KSZ8721SLI-TR)
- Automatic installation features (karşılaştırma:LAN8720AI-CP-TR)
Tasarım Notları
Route the Ethernet differential pairs as a controlled-impedance pair with continuous reference planes, minimal stubs, and tightly matched via geometry. Place the PHY, crystal, and supporting passives close to their associated pins, and follow the manufacturer layout guidance for the 24-SQFN exposed pad. Keep switching-regulator inductors and high-current return paths away from the differential nodes to reduce radiated and conducted noise.
Decouple each supply rail with the capacitance and placement specified in the manufacturer datasheet, and provide a clean connection from the exposed pad to the appropriate ground plane. Verify startup sequencing, supply tolerances, and the relationship between the 1.8 V, 2.5 V, and 3.3 V operating options. Do not infer a usable supply rail from the fact that another option exists; the host system and PHY voltage mode must match.
Pay particular attention to the 50 MHz or 25 MHz clock architecture required by the selected RMII configuration, including crystal loading, grounding, and source characteristics. The host bus, clock, and control signals must meet the manufacturer timing specification. Because register addresses, strap functions, and PHY address selection can differ among alternatives, update firmware and pull-up or pull-down networks during any substitution review.
Do not treat the PHY as a complete Ethernet network port. Every design also requires suitable Ethernet magnetics, a compliant connector, isolation components where applicable, and an unobstructed cable exit. Validate auto-negotiation, HP Auto-MDIX behavior, link timing, and recovery from cable insertion in the final system. A footprint-compatible replacement does not guarantee drop-in equivalence when power, clock, strap, or register behavior differs.
Uyumluluk Bilgisi
The Microchip manufacturer datasheet identifies a lead-free RoHS-compliant package and states that the family meets the halogen maximum concentration values in IEC 61249-2-21. REACH, AEC-Q100, and conflict-minerals status are unknown.