LAN9211-ABZJ - 10/100 Ethernet Controller | Microchip Technology
MPN: LAN9211-ABZJ ✓ AktifLAN9211-ABZJ Genel Bakış
An Ethernet controller is an interface integrated circuit that connects an embedded host processor to a physical Ethernet network. It combines protocol processing, media access control, and physical-layer signaling into one device. The LAN9211 belongs to the hierarchy of Ethernet controller, network interface controller, interface IC, and semiconductor, reducing the component count and PCB area required for an embedded Ethernet port.
The LAN9211-ABZJ provides a 16-bit parallel interface to its host system and integrates a 10/100 Ethernet PHY. HP Auto-MDIX supports automatic handling of straight-through and crossover cable connections, allowing a single RJ45 design to work with common Ethernet cabling arrangements. Its single-chip implementation is intended for embedded applications requiring compact networking with controlled system cost.
The manufacturer describes the LAN9211 as a full-featured controller designed for applications where performance, flexibility, ease of integration, and system cost control are important. Its parallel host interface is suitable for processors able to transfer network data through a memory-mapped bus. Firmware and host-driver configuration remain important elements of the integration because interrupt, descriptor, and buffer-management behavior determine practical network throughput.
Typical uses include industrial Ethernet equipment, embedded control systems, communications appliances, test instruments, and networked sensors. The 10/100 Mbit/s rate is appropriate for management traffic, serial-to-Ethernet equipment, factory monitoring, and legacy industrial networks. HP Auto-MDIX simplifies field installation by reducing cabling restrictions at the connector.
The 56-pin QFN package makes high-density routing possible but requires careful thermal and layout work. Place the exposed ground pad on a multilayer board with a via array and provide the decoupling network shown in the manufacturer datasheet. The package suffix ABZJ identifies the ordered tray configuration, and the QFN land pattern must be designed before assembly.
This product page consolidates the exact orderable MPN, core interface and packaging details, manufacturer documentation, sourcing guidance, and design cautions. It also distinguishes documented order information from replacement analysis so engineers can evaluate PCB reuse without assuming that a related Ethernet controller has identical pinout, host timing, or electrical behavior.
Drop-in alternatifler için LAN9211-ABZJ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinLAN9211-ABZJ Özellikler
| Ethernet Data Rate | 10 Mbit/s or 100 Mbit/s |
| Ethernet Classification | 10/100 Base-T |
| Device Type | Single-chip Ethernet controller |
| Host Interface | 16-bit parallel |
| Integrated PHY | Yes, 10/100 Ethernet PHY |
| Auto-MDIX Support | HP Auto-MDIX |
| Nominal Supply Voltage | 3.3 V |
| Supply Voltage Range | 2.97 V to 3.63 V |
| Package Type | 56-pin QFN |
| Package Dimensions | 8 mm x 8 mm |
| Package Body Size | 8 mm x 8 mm |
| Pin Sayısı | 56 pins |
| Temperature Class | Industrial temperature support |
| Interface Category | Interface IC |
| Ethernet Standard | IEEE 802.3 and IEEE 802.3u |
| Maximum Link Speed | 100 Mbit/s |
| Orderable Packaging | Tray |
LAN9211-ABZJ 8 mm x 8 mm Pin Yapısı Kılavuzu
LAN9211-ABZJ (8 mm x 8 mm paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: LAN9211-ABZJ.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
LAN9211-ABZJ için uygundur 6 uygulamas: Industrial Control Ethernet Port, Embedded Network Gateway, Factory Monitoring and HMI, Serial-to-Ethernet Equipment, Networked Sensors and IoT Gateways, Test and Measurement Instrument.
Industrial Control Ethernet Port
The LAN9211-ABZJ fits industrial controllers that need a compact 10/100 Mbit/s management and communications port. Its 16-bit parallel interface connects directly to a processor bus, while the integrated PHY reduces the number of external network-interface components. HP Auto-MDIX simplifies field cabling, and the 2.97 V to 3.63 V operating range is compatible with a regulated 3.3 V system rail. The 56-pin QFN also supports dense industrial equipment layouts when its exposed ground pad is connected using the manufacturer-recommended via pattern.
Önerilen
Embedded Network Gateway
The LAN9211-ABZJ is appropriate for embedded gateways that bridge a 16-bit host processor to a 10/100 Base-T network. At 100 Mbit/s, it supports management traffic, protocol conversion, logging, and remote supervision without requiring a higher-speed Ethernet PHY. HP Auto-MDIX improves installation flexibility by supporting common straight-through and crossover cables. The controller's low-profile 56-pin QFN package is useful in compact gateways, but PCB planning must reserve adequate copper and thermal-via resources for the exposed pad.
Önerilen
Factory Monitoring and HMI
The LAN9211-ABZJ can add a wired network connection to a human-machine interface, data logger, or factory monitoring terminal. The 16-bit parallel host interface enables efficient access to packet descriptors and controller status, while 10/100 Base-T operation is suitable for supervisory traffic and legacy plant networks. HP Auto-MDIX reduces installation errors where technicians may use either straight-through or crossover cabling. Its industrial-temperature positioning makes it a sensible candidate for equipment that must operate reliably in temperature-variable factory environments.
Önerilen
Serial-to-Ethernet Equipment
The LAN9211-ABZJ supports serial-to-Ethernet products that expose an embedded serial interface to a 10/100 network. The host processor can exchange configuration, status, and telemetry packets through the controller's 16-bit parallel interface. A 100 Mbit/s link provides ample throughput for this class of equipment while preserving compatibility with 10 Mbit/s legacy infrastructure. HP Auto-MDIX simplifies cabling, and the 8 mm by 8 mm QFN footprint helps when the enclosure exposes only a small front-panel connector area.
Önerilen
Networked Sensors and IoT Gateways
The LAN9211-ABZJ is suitable for wired sensor aggregation where a microcontroller must collect local measurements and forward them over Ethernet. The 16-bit parallel interface allows a host processor to manage buffers and network traffic, while the integrated 10/100 PHY avoids a separate physical-layer device in a space-constrained design. HP Auto-MDIX helps with unpredictable cabling in IoT installations. For long cable runs or industrial environments, the complete system should additionally address surge, isolation, grounding, and common-mode protection around the external RJ45 connection.
Önerilen
Test and Measurement Instrument
The LAN9211-ABZJ can provide laboratory and field-test instruments with a legacy-compatible 10/100 Ethernet management port. The parallel interface suits instrument controllers with memory-mapped buses, and the controller handles the Ethernet physical layer while host firmware manages commands, results, and remote access. HP Auto-MDIX simplifies connection to test computers and laboratory networks that may use either cable orientation. At 100 Mbit/s, the interface is appropriate for status, configuration, and result transfer, while the 56-pin QFN requires careful high-density layout and ground-plane construction.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: LAN9211-ABZJ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Brand | Microchip Technology |
| Package | 56-pin QFN, 8 mm x 8 mm |
| Ethernet Speed | 10/100 Base-T, up to 100 Mbit/s |
| Host Interface | 16-bit parallel |
| Supply Voltage Range | 2.97 V to 3.63 V |
| Auto-MDIX | HP Auto-MDIX |
| Temperature Class | Industrial temperature support |
| Orderable Packaging | Tray |
Ana Farklılayıcılar
- Integrated 10/100 Ethernet controller and PHY (karşılaştırma:LAN9210)
- HP Auto-MDIX cable handling (karşılaştırma:LAN9215i)
- Native parallel host connection (karşılaştırma:LAN7800T/VSX)
Tasarım Notları
Design the 56-pin QFN land pattern from the manufacturer datasheet and preserve the exposed ground pad geometry. Place supply bypass capacitors close to the device's power pins, with short ground returns to the relevant plane. The exposed pad is electrically important and thermally essential; use the recommended via arrangement instead of relying on a few isolated thermal vias.
Route the 16-bit parallel host interface as a short, controlled-length group on the shortest practical signal path. Keep the Ethernet differential pairs away from noisy switching nodes and follow the datasheet's reference layout for the integrated PHY. Provide a continuous ground reference beneath high-speed and sensitive traces, and avoid adding stubs or test-point structures that degrade signal integrity.
Do not treat a related LAN9210, LAN9215i, or USB Ethernet controller as an automatic drop-in replacement. Verify every pin assignment, supply pin, clock requirement, host-bus timing, reset behavior, interrupt definition, and package dimension against the manufacturer documentation. Firmware and register compatibility must also be reviewed because an identical connector or Ethernet speed does not establish controller compatibility.
Apply the manufacturer's recommended 3.3 V supply and decoupling arrangement. Confirm that the host board's supply source can meet controller current transients without excessive ripple, and keep the Ethernet PHY supply return close to the device. Validate the completed design across startup, reset, sustained traffic, and cable insertion or removal because network transients can influence supply behavior.
Uyumluluk Bilgisi
The product ordering information identifies industrial temperature support, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified in the cited product records.
