LAN9221I-ABZJ - 16-Bit 10/100 Ethernet Controller | Microchip
MPN: LAN9221I-ABZJ ✓ AktifLAN9221I-ABZJ Genel Bakış
An Ethernet controller is an interface IC that connects an embedded processor or microcontroller to a physical Ethernet network. Within the networking hierarchy, the LAN9221I-ABZJ combines the Ethernet Media Access Controller, physical-layer transceiver, host bus interface, packet memory, and checksum-processing functions. Its integrated PHY reduces external component count, while its 16-bit SRAM-like slave interface supports direct connection to many 16-bit microprocessors and microcontrollers.
Key features include integrated checksum offload, automatic CRC generation and checking, and support for variable host-interface I/O voltage. Interrupt generation allows the host to respond to packet and status events without continuous polling. The device also supports power-up and reset configuration, non-volatile storage of operating parameters, and a wake-up function for systems that need controlled reactivation from low-power states.
The parallel host interface is designed for higher-throughput embedded networking than a serial-interface controller while avoiding the complexity of a PCI bus. The controller can connect to common 16-bit processors or to 32-bit processors that expose a 16-bit external bus. Its separate MAC and PHY integration supports both transmit and receive packet handling through the host interface while maintaining compatibility with standard 10/100 Ethernet networks.
Typical uses include industrial control gateways, embedded serial-to-Ethernet equipment, data-acquisition systems, set-top-box interfaces, test equipment, and networked microcontrollers. The device is particularly appropriate when the host already has a parallel bus and the design needs a compact, self-contained Ethernet endpoint rather than an external discrete PHY.
When laying out the board, treat the Ethernet magnetics, RJ45 interface, crystal, clock source, bypass capacitors, and controller supplies as one carefully partitioned subsystem. Keep high-speed host and network traces away from the analog PHY and power-return paths. Confirm the external magnetic component and cable-side network requirements against the manufacturer reference design before releasing the PCB.
This product page organizes the manufacturer specifications, package constraints, verified comparison data, and practical integration considerations into one engineering reference. It also distinguishes the industrial-temperature LAN9221I-ABZJ from related LAN9221 variants and identifies where a drop-in substitution must be confirmed rather than assumed.
Drop-in alternatifler için LAN9221I-ABZJ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller LAN9221I-ABZJ (aynı form faktörü ve ayağa oturma) — farklı olan Host Interface, Product Type, Package, Auto-MDIX, Supply Voltage.
LAN9221-ABZJ
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LAN9221I-ABZJ Özellikler
| Product Type | 10/100 Ethernet controller with integrated MAC and PHY |
| Host Interface | 16-bit parallel SRAM-like slave interface |
| Ethernet Standard | IEEE 802.3 10BASE-T and IEEE 802.3u 100BASE-TX |
| Veri Hızı | 10 Mb/s or 100 Mb/s |
| Besleme Gerilimi | 3.3 V |
| Paket | 56-QFN, 8 x 8 mm |
| Montaj Türü | Surface mount |
| Temperature Range | -40°C to +85°C |
| Auto-MDIX | Supported |
| Wake-Up Function | Supported |
| Interrupt Generation | Supported |
| Non-Volatile Configuration Storage | Supported |
| Power-Up and Reset Configuration | Supported |
| Checksum Offload | Integrated checksum offload engines |
| CRC Generation and Checking | Automatic generation and checking |
| Host I/O Voltage | Variable voltage |
| Lead-Free Package | Yes |
| RoHS Compliance | Compliant |
LAN9221I-ABZJ yes Pin Yapısı Kılavuzu
LAN9221I-ABZJ (yes paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: LAN9221I-ABZJ.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
LAN9221I-ABZJ için uygundur 6 uygulamas: Industrial Ethernet Control Gateway, Embedded Data-Acquisition System, Networked Microcontroller Endpoint, Automated Test and Measurement Equipment, Serial-to-Ethernet Embedded Bridge, Outdoor Networked Monitoring Equipment.
Industrial Ethernet Control Gateway
The LAN9221I-ABZJ fits an industrial control gateway because it combines a 10/100 Ethernet MAC and PHY with a 16-bit host interface in one 56-QFN 8 x 8 mm device. Its -40°C to +85°C operating range provides suitable environmental margin for factory equipment, while HP Auto-MDIX simplifies connection to varied switch and cable arrangements. The parallel interface supports direct attachment to compatible embedded processors. Checksum offload and automatic CRC processing can reduce host workload during sustained data transfer, although the final protocol stack, magnetic component, and isolation strategy must be validated for the installation environment.
Önerilen
Embedded Data-Acquisition System
A data-acquisition controller with a 16-bit external bus can use the LAN9221I-ABZJ as a dedicated 10/100 Ethernet endpoint without adding a separate MAC and PHY. The controller supports 10 Mb/s and 100 Mb/s operation, automatic CRC generation and checking, and checksum offload, which helps the host process measurement packets efficiently. The 56-QFN package limits board area, while variable host-interface I/O voltage supports broader processor interoperability. Firmware must still implement the required transport protocol, buffer management, link monitoring, and recovery behavior for loss-of-network conditions.
Önerilen
Networked Microcontroller Endpoint
The LAN9221I-ABZJ is appropriate when a networked microcontroller or microprocessor requires a dedicated 10/100 Ethernet interface and already exposes a 16-bit parallel bus. Its SRAM-like slave interface provides a straightforward connection to common embedded processors, while integrated checksum offload reduces software processing overhead. The 3.3 V device supports modern embedded power architectures, and interrupt generation lets the firmware sleep between network events. The design must account for the required clock source, Ethernet magnetics, bypass network, connector, isolation requirements, and careful separation of digital host signals from sensitive PHY paths.
Önerilen
Automated Test and Measurement Equipment
Test and measurement instruments can use the LAN9221I-ABZJ to transfer results through a standard 10/100 Ethernet network while retaining a compact controller footprint. At 100 Mb/s, the interface supports instrument-control traffic, status reporting, and moderate data acquisition streams, while the 16-bit bus is suited to processors with parallel external memory or I/O. Automatic CRC processing and checksum offload improve host efficiency. For precise instrumentation, isolate high-level analog circuitry from the Ethernet section, use suitable magnetic components, and validate packet timing under sustained load rather than relying only on nominal link throughput.
Önerilen
Serial-to-Ethernet Embedded Bridge
The LAN9221I-ABZJ can serve as the Ethernet side of an embedded protocol bridge when the host processor converts serial data into Ethernet frames. Its integrated MAC and PHY eliminate a separate Ethernet transceiver, while the 16-bit host interface provides sufficient bandwidth for bridging moderate command and telemetry streams. The controller supports 10BASE-T, 100BASE-TX, and HP Auto-MDIX, allowing automatic adaptation to common copper links. Firmware design should define buffer limits, backpressure, timeout behavior, and link-loss recovery so serial traffic cannot overwhelm the Ethernet transmit path.
Önerilen
Outdoor Networked Monitoring Equipment
The -40°C to +85°C range makes the LAN9221I-ABZJ a strong candidate for outdoor monitoring equipment where internal temperatures can vary substantially. It combines 10/100 Ethernet connectivity, automatic cable-side detection, interrupt-driven host operation, and compact 8 x 8 mm packaging in one controller. These functions support remote environmental, utility, or building-monitoring nodes that exchange periodic status and alarm data. The enclosure still requires appropriate input surge protection, isolation, grounding, condensation control, and Ethernet magnetics selected for the installation environment; device temperature qualification alone does not guarantee network-port robustness.
Önerilen
Mühendislik referans verileri: LAN9221I-ABZJ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | LAN9221-ABZJ |
|---|---|---|
| Package | 56-QFN (8x8) | 56-QFN (8x8) - same package |
| Brand | Microchip Technology | Microchip Technology |
| Product Type | 10/100 Ethernet controller with integrated MAC and PHY | 10/100 Ethernet controller with integrated MAC and PHY |
| Host Interface | 16-bit parallel SRAM-like slave interface | 16-bit parallel SRAM-like slave interface |
| Ethernet Support | IEEE 802.3 10BASE-T and IEEE 802.3u 100BASE-TX | IEEE 802.3 10BASE-T and IEEE 802.3u 100BASE-TX |
| Operating Temperature | -40°C to +85°C | 0°C to +70°C |
| RoHS Status | Compliant | Compliant |
Ana Farklılayıcılar
- Wider industrial-temperature operating range (karşılaştırma:LAN9221-ABZJ)
- Single-chip MAC and PHY integration (karşılaştırma:LAN9221-ABZJ)
- Industrial-grade environmental suitability (karşılaştırma:LAN9221-ABZJ)
Tasarım Notları
Separate the Ethernet PHY and transformer-side routing from the 16-bit host bus, clock, and high-speed return-current paths. Keep the controller, crystal or clock components, bypass capacitors, and magnetics in the same physical region whenever board constraints permit. Place input and output capacitors at their associated supply pins with short ground returns, and route clock traces away from the Ethernet differential pairs to reduce susceptibility to timing disturbance and radiated emissions.
Follow the manufacturer reference schematic for supply topology, sequencing, and bypass capacitance rather than substituting generic bulk-capacitor values. The LAN9221I-ABZJ operates from 3.3 V and supports variable host I/O voltage, so the processor and controller I/O domains must remain electrically compatible. Validate the Ethernet magnetics and connector supply path under startup, link activity, and cable-disconnect events, and include adequate local energy storage to avoid unintended resets.
Do not treat the non-I LAN9221-ABZJ as an unrestricted industrial substitute. Its documented 0°C to +70°C range is narrower than the target's -40°C to +85°C range, so an uncapped enclosure or cold outdoor deployment can exceed its limits. Also verify that firmware initialization, interrupt polarity, reset behavior, and non-volatile configuration match before changing the ordering code. Temperature qualification and functional equivalence must both be closed before release.
Preserve the manufacturer-defined Ethernet differential-pair geometry and via structure on the PCB. Avoid adding test-point stubs or changing layer transitions beneath the magnetics and PHY without reviewing signal-integrity impact. Because the host interface is synchronous and parallel, use the datasheet timing limits as the routing constraint, including setup and hold margins relative to the controller clock. Validate the assembled board with margin tests across temperature and supply tolerance rather than relying only on nominal timing.
Uyumluluk Bilgisi
The 56-QFN package is identified as lead-free and RoHS compliant. No AEC-Q100 qualification, REACH status, halogen-free declaration, or conflict-minerals statement was identified for this ordering code.