LC4064B-5T100C - 64-Macrocell 5 ns CPLD | Lattice
MPN: LC4064B-5T100C ✓ AktifLC4064B-5T100C Genel Bakış
A CPLD is a programmable logic device that combines nonvolatile configuration storage, programmable logic architecture, and flexible I/O in one package. In the product hierarchy, the LC4064B belongs to the Lattice ispMACH 4000B family of complex programmable logic devices. Unlike a small PAL or GAL device, a CPLD provides multiple macrocells and routing resources that can implement substantially larger control, decoding, bus arbitration, and interface functions.
The principal device attributes are 64 macrocells, 64 user I/O pins, a 5 ns pin-to-pin delay, and a 227 MHz maximum operating frequency. Its in-system programmability permits the configuration memory to be updated through the programming interface without removing the device from the circuit. This is useful during prototype bring-up, production programming, or field upgrades where a stable PCB layout and reusable manufacturing flow are important.
The ispMACH 4000B architecture provides predictable timing for combinational and registered logic functions. Engineers can consolidate separate PAL, GAL, and small-programmable-logic devices into one CPLD while retaining deterministic control over timing paths and board-level pin assignments. The 100-pin TQFP package provides a conventional surface-mount footprint with 64 user I/O pins and dedicated configuration, clock, control, and power connections.
Typical uses include industrial control and automation, communication-interface bridging, peripheral expansion, signal decoding, data acquisition, and embedded system control. The 64 available I/O pins make the device especially useful for designs that need more parallel board connections than a small logic package can offer. The 227 MHz performance also supports moderately high-speed interface and control logic without moving to an FPGA.
Design the power rails and decoupling around the Lattice Semiconductor datasheet requirements, and preserve the specified programming interface signals for in-system configuration. Confirm pin assignments, supported I/O standards, voltage tolerances, and timing constraints against the manufacturer documentation before layout release. Although a CPLD provides more integration than discrete logic, an FPGA may remain preferable when registers, block memory, higher I/O counts, or richer clocking resources are required.
Drop-in alternatifler için LC4064B-5T100C — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller LC4064B-5T100C (aynı form faktörü ve ayağa oturma) — farklı olan Package.
LC4064B-5T100I
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LC4064B-10T100I
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
LC4064B-5TN100C
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
LC4064B-75TN100C
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
LC4064B-5T100C Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | Complex Programmable Logic Device (CPLD) |
| Series | ispMACH 4000B |
| Macrocell Count | 64 macrocells |
| User I/O Count | 64 I/O pins |
| Pin-to-Pin Delay | 5 ns |
| Maximum Operating Frequency | 227 MHz |
| Internal Supply Voltage Range | 2.3 V to 2.7 V |
| Programming | In-system programmable |
| Paket | 100-lead TQFP, 14 mm x 14 mm |
| Montaj Türü | Surface mount |
| Logic Family | ispMACH 4000B |
| Programming Type | EEPROM configuration |
LC4064B-5T100C 100-lead tqfp, 14 mm x 14 mm Pin Yapısı Kılavuzu
LC4064B-5T100C (100-lead tqfp, 14 mm x 14 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: LC4064B-5T100C.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
LC4064B-5T100C için uygundur 6 uygulamas: Industrial Control and Automation, Communication Interface Bridging, Data Acquisition and Signal Conditioning, Peripheral Expansion and Bus Control, LED Lighting and Display Control, Automotive and Transportation Control.
Industrial Control and Automation
The LC4064B-5T100C fits centralized industrial control logic because its 64 macrocells and 64 user I/O pins can consolidate sequencing, interlocks, decoding, and actuator-control functions onto one programmable device. The 5 ns pin-to-pin delay provides a 50% timing advantage over a 10 ns grade for paths sensitive to process or input delays. It can be placed between sensors, relay drivers, and a controller while retaining in-system programming for configuration changes. The 227 MHz maximum operating frequency supports higher-speed control logic, although final timing must be checked for each implemented path and I/O loading condition.
Önerilen
Communication Interface Bridging
The LC4064B-5T100C is useful for protocol conversion, bus arbitration, and data-routing logic when a design needs more parallel connections than a small GAL device provides. Its 64 user I/O pins allow several interfaces or control buses to be consolidated, while the 5 ns delay supports short combinational decode and handshake paths. The in-system programmable architecture permits design revisions without changing the PCB. Engineers should use the manufacturer pin and timing documentation to assign voltage-tolerant I/O, account for external transceiver latency, and ensure signal integrity on board-level interfaces.
Önerilen
Data Acquisition and Signal Conditioning
The LC4064B-5T100C can implement acquisition control, sensor selection, timing gates, and data-format conversion around external analog or digital front ends. Its 64 macrocells provide more programmable logic than small legacy PAL devices, while 64 user I/O pins permit parallel sensor, latch, and counter connections. The 5 ns timing grade helps minimize decode delay between an acquisition event and the associated control outputs. For high-speed analog signals, the CPLD should control digital timing rather than replace the analog front end, and every I/O path must satisfy its specified voltage and timing limits.
Önerilen
Peripheral Expansion and Bus Control
The LC4064B-5T100C is appropriate for expanding legacy processor or microcontroller interfaces without loading the host bus with a large collection of discrete logic devices. It can decode address ranges, generate enables and chip selects, arbitrate requests, and implement register-style control logic in one 100-lead TQFP package. The 64 macrocells offer enough capacity for structured control logic, while the 5 ns delay reduces address-decode delay relative to a 10 ns grade. Validate the host-bus timing, I/O direction controls, and registered versus combinational outputs against the manufacturer's timing documentation.
Önerilen
LED Lighting and Display Control
The LC4064B-5T100C can consolidate LED sequencing, display multiplexing, keypad scanning, and illumination-control state machines into one programmable device. Its 64 user I/O pins offer ample parallel connections for display segments, indicators, and switch matrices, while the 5 ns timing class supports short selection and decode paths. The 227 MHz maximum operating frequency provides additional timing headroom for registered control logic. Actual illumination timing remains governed by external driver and power components, so the CPLD outputs should be checked for voltage, current-interface, and rise-time requirements in the final schematic.
Önerilen
Automotive and Transportation Control
The LC4064B architecture can support control, diagnostic, and interface logic in transportation equipment, but the LC4064B-5T100C is a commercial-grade ordering code. Engineers should use it only where the specified commercial temperature range meets the operating environment. The device's 64 macrocells, 64 I/O pins, and 5 ns timing are useful for consolidating relay logic, sensor conditioning interfaces, and communication decoding. For equipment requiring an explicitly automotive-qualified part, confirm AEC-Q100 status and select a specifically qualified device rather than assuming that an industrial-temperature suffix is equivalent to automotive qualification.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: LC4064B-5T100C — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | LC4064B-5T100I | LC4064B-10T100I | LC4064B-5TN100C | LC4064B-75TN100C |
|---|---|---|---|---|---|
| Package | 100-lead TQFP, 14 mm x 14 mm | 100-lead TQFP | 100-lead TQFP | 100-lead TQFP | 100-lead TQFP |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Device Type | ispMACH 4000B CPLD | ispMACH 4000B CPLD | ispMACH 4000B CPLD | ispMACH 4000B CPLD | ispMACH 4000B CPLD |
| Macrocell Count | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells |
| User I/O Count | 64 I/O pins | 64 I/O pins | 64 I/O pins | 64 I/O pins | 64 I/O pins |
| Pin-to-Pin Delay | 5 ns | 5 ns | 10 ns | 5 ns | 75 ns |
| Temperature Grade | Commercial | Industrial | Industrial | Commercial | Commercial |
| Internal Supply Voltage Range | 2.3 V to 2.7 V | 2.3 V to 2.7 V | 2.3 V to 2.7 V | 2.3 V to 2.7 V | 2.3 V to 2.7 V |
| Programming | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
Ana Farklılayıcılar
- Faster timing grade than the 10 ns device (karşılaştırma:LC4064B-10T100I)
- Same speed grade with industrial-temperature ordering option (karşılaştırma:LC4064B-5T100I)
- More I/O capacity than small discrete-programmable logic (karşılaştırma:ATF16V8CZ-15XC)
- Higher stated operating frequency than the slow same-family grade (karşılaştırma:LC4064B-75TN100C)
Tasarım Notları
Use the manufacturer's 100-lead TQFP land pattern and maintain the documented power and ground connectivity. Place the required decoupling capacitors close to their associated supply pins, keep the configuration interface accessible, and route high-frequency or externally exposed signals away from the programming and clock paths. Because the TQFP leads are closely spaced, verify drill and courtyard dimensions against the current package drawing before releasing the PCB footprint.
Assign I/O standards and pin directions from the configured design rather than from the 64 user I/O count alone. Review dedicated programming, clock, control, supply, and ground pins in the Lattice Semiconductor pin-description table, then preserve their required locations on the board. For mixed-voltage interfaces, use the manufacturer's guidance for series resistance, level translation, and unused inputs so that no programmable pin is driven beyond its permitted limits.
Do not select a different suffix solely because the package dimensions match. LC4064B-5T100I changes the environmental grade, LC4064B-10T100I changes the speed class, and suffix codes containing N may identify additional device attributes. Compare the complete ordering code, pin table, timing grade, temperature limits, and configuration requirements. A replacement should be treated as drop-in only after its exact manufacturer documentation confirms compatibility.
The 5 ns pin-to-pin delay describes the device grade, not a guaranteed delay for every compiled path. Constrain timing-critical logic, register outputs where appropriate, and check external setup, hold, clock skew, and loading requirements. Use registered I/O for interfaces that repeat at high frequency, and avoid treating the 227 MHz figure as a direct substitute for a complete board-level timing budget.
Uyumluluk Bilgisi
Compliance status requires confirmation from the current Lattice Semiconductor product documentation or declaration for the exact ordering code.