STMicroelectronics

LM2902HDT - Quad 30V Low-Power Op Amp | STMicroelectronics

MPN: LM2902HDT ✓ Aktif
Single supply Vdss 14-SO Package Internally frequency-compensated Speed
MOQ: 1 |

LM2902HDT Genel Bakış

STMicroelectronics LM2902HDT is a quad operational amplifier built for automotive and industrial control systems, with four independent high-gain, internally frequency-compensated amplifiers in a 14-SO package. It operates from a single supply, supports high-voltage operation up to 30 V, and is designed for low-power signal-conditioning applications. The four amplifiers share the same package while remaining electrically independent, allowing one device to implement multiple analog stages.

An operational amplifier is an active analog circuit component that amplifies the difference between two input voltages. The LM2902 belongs to the low-power quad operational amplifier family, which sits within the broader voltage-amplifier and amplifier IC hierarchy. Its single-supply architecture is useful for industrial controls, sensor interfaces, transducers, and general-purpose signal processing where a grounded signal reference is required.

The key characteristics are a 30 V maximum supply voltage, low-power operation, four amplifiers per package, and internally compensated operation. The device is intended for low-frequency analog applications rather than high-speed signal chains. Because each amplifier is independent, unused sections can be evaluated according to the manufacturer's recommended input and output conditions. Stable operation requires attention to common-mode range, output swing, input bias current, and supply bypass capacitance.

The LM2902HDT is associated with the automotive and industrial control market. Its quad-channel construction can reduce board area when a design needs four similar amplifier functions, such as sensor conditioning, current-loop buffering, threshold comparison, or actuator-driver interfaces. The 14-SO package is a conventional surface-mount solution that is straightforward to route, although the exposed thermal behavior and maximum supply rating must be respected.

Typical applications include industrial sensor interfaces, automotive control modules, instrumentation, low-frequency active filters, and buffered control signals. When designing around the LM2902HDT, place the supply bypass capacitor close to the device and confirm that input and output voltages remain inside the common-mode and output-swing limits for the selected supply voltage. Decoupling, grounding, input protection, and stable reference design determine whether the amplifier operates predictably in the final system.

Drop-in alternatifler için LM2902HDT — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller LM2902HDT (aynı form faktörü ve ayağa oturma) — farklı olan Maximum Supply Voltage, Package, Supply Configuration.

Texas Instruments
Maximum Supply Voltage: 26 V
Package: 14-SOIC
Supply Configuration: Single supply or split supply
İle Karşılaştır LM2902HDT →

LM2902HD

✅ Yerleştirme
📦 14-SO
Same 14-SO quad operational amplifier family; the exact ordering-code difference is 0 V or 0% in the verified package description, with temperature-grade and packing details requiring confirmation.

📋 Katalogda Olmayan Referans Alternatifi

LM2902HYD

✅ Yerleştirme
📦 14-SO
Same 14-SO quad operational amplifier family; the verified family listing does not quantify the electrical difference from LM2902HDT, so the 30 V supply rating and four-channel architecture remain the principal matching criteria.

📋 Katalogda Olmayan Referans Alternatifi

LM2902HYDT

✅ Yerleştirme
📦 14-SO
Same 14-SO quad operational amplifier family with four amplifiers and single-supply operation; the suffix identifies a related ordering option whose temperature-grade details must be checked against LM2902HDT.

📋 Katalogda Olmayan Referans Alternatifi

LM2902D

✅ Yerleştirme
Texas Instruments
📦 14-SO
Quad operational amplifier · 4 · 26 V · 1.2 MHz · 2 mV · Single supply or split supply · Push-pull

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM2902H

✅ Yerleştirme
📦 14-SO
Same LM2902 four-amplifier family in the 14-SO package; the base ordering code may differ in temperature grade or packing suffix, so the manufacturer ordering table should be used for final release.

📋 Katalogda Olmayan Referans Alternatifi

LM2902HDT Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type General-purpose operational amplifier
Number of Amplifiers 4
Architecture Quad independent amplifier
Supply Configuration Single supply
Maximum Supply Voltage 30 V
Voltage Gain High gain
Frequency Compensation Internally frequency-compensated
Paket 14-SO
Montaj Türü Surface mount

LM2902HDT Pin Yapısı

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
Pin 1 OUT1 — Output of amplifier 1
Pin 2 IN1- — Inverting input of amplifier 1
Pin 3 IN1+ — Non-inverting input of amplifier 1
Pin 4 V- — Negative supply pin
Pin 5 IN2+ — Non-inverting input of amplifier 2
Pin 6 IN2- — Inverting input of amplifier 2
Pin 7 OUT2 — Output of amplifier 2
Pin 8 OUT3 — Output of amplifier 3
Pin 9 IN3- — Inverting input of amplifier 3
Pin 10 IN3+ — Non-inverting input of amplifier 3
Pin 11 V+ — Positive supply pin
Pin 12 IN4+ — Non-inverting input of amplifier 4
Pin 13 IN4- — Inverting input of amplifier 4
Pin 14 OUT4 — Output of amplifier 4

Tipik Uygulamalar

LM2902HDT için uygundur 6 uygulamas: Automotive Sensor Conditioning, Industrial Control Signal Conditioning, Active Filter and Amplifier Stages, Instrumentation and Transducer Interfaces, Battery and DC-Powered Control Modules, Power Supply Feedback and Voltage Monitoring.

🚗

Automotive Sensor Conditioning

The LM2902HDT fits automotive sensor-conditioning blocks because it provides four independent, internally compensated amplifiers in one 14-SO package. The device operates from a single supply and supports a 30 V maximum supply voltage, which is useful for interfaces connected to higher-voltage vehicle systems. Each channel can buffer or amplify a sensor signal while another channel handles thresholding or feedback. Design around the specified common-mode input range and output swing, and add input protection where sensors can expose the amplifier to transient overvoltage. The main benefit is PCB consolidation: four analog functions can occupy one package instead of four separate single or dual amplifier packages. Confirm the exact temperature grade and automotive qualification requirements against the ordering table before using the device in a safety-relevant or production vehicle platform.

🏭

Industrial Control Signal Conditioning

The LM2902HDT is suitable for low-frequency industrial control signal conditioning because its four independent amplifiers provide flexible channel allocation within a single 14-SO package. A single-supply architecture simplifies circuits that process sensor, switch, or controller signals referenced to ground, while the 30 V maximum supply rating supports industrial supply environments. Four channels can be assigned to input amplification, active filtering, error amplification, and actuator-command buffering. Keep input signals within the common-mode range and verify output headroom at the lowest supply voltage used in the design. Stable reference grounding, short return paths, and local supply bypassing are essential for repeatable control behavior. The quad arrangement also reduces board area and component count compared with four separate amplifier ICs.

🔧

Active Filter and Amplifier Stages

The LM2902HDT can implement low-frequency active-filter stages because it combines four high-gain, internally compensated amplifiers with a single-supply operating architecture. A quad device allows multiple amplifier sections to form cascaded filters, buffer a filter output, and provide gain in a signal chain without requiring separate packages. The 14-SO footprint simplifies routing compared with a larger mixed set of devices. Component values must be calculated against the device's actual bandwidth and gain-bandwidth behavior in the manufacturer datasheet, and resistor networks should use suitable tolerances to control cutoff frequency and passband gain. Input and output loading should remain within the amplifier's specified limits. Place sensitive filter nodes away from switching regulators and high-current return paths to avoid unintended noise coupling.

📊

Instrumentation and Transducer Interfaces

The LM2902HDT fits instrumentation interfaces that need several low-power gain or buffering functions in a compact area. The four amplifiers can serve separate sensor channels, transducer outputs, or differential stages, while the 14-SO package keeps the device compatible with conventional surface-mount assembly. Single-supply operation is useful when the measured signal is referenced close to ground, although every input and output must remain inside the device's specified common-mode and swing limits. For low-level instrumentation, pay particular attention to input offset voltage, input bias current, noise, and source impedance because those values determine the achievable measurement accuracy. Place input components close to the relevant pins, use a quiet ground reference, and follow the manufacturer-recommended supply decoupling to minimize measurement disturbance.

⚡

Battery and DC-Powered Control Modules

The LM2902HDT is applicable to battery-powered or DC-powered control modules that require low-power quad amplification without a dual-rail supply. Its four independent channels support threshold detection, current-signal buffering, actuator feedback, and supervisory functions within one 14-SO package. The single-supply configuration reduces system complexity, while the 30 V maximum supply rating provides margin for protected industrial or automotive rails. Designers should still calculate the amplifier's quiescent dissipation at the selected supply voltage and verify the output-current demand for every connected load. Prevent input pins from floating, constrain capacitive loads according to the stability guidance, and include a defined shutdown strategy if the system can enter a low-power state.

🖥️

Power Supply Feedback and Voltage Monitoring

The LM2902HDT can support power-supply feedback, voltage monitoring, and fault-detection functions because four independent amplifiers permit multiple supervisory channels in one 14-SO package. Separate channels can monitor an output rail, amplify a comparator reference, condition a current-sense signal, and provide control feedback. The quad architecture reduces board area and simplifies routing in control-oriented power systems. Each monitored node must remain within the amplifier's input common-mode range, and the circuit must tolerate the supply variation and transients expected in its environment. Keep high-current switching paths separate from the feedback reference and use local decoupling to prevent supply ripple from changing the apparent monitored voltage. Review the device's output-swing limits to ensure fault signals remain detectable across the complete operating range.

What is LM2902HDT?
The LM2902HDT is a STMicroelectronics quad low-power operational amplifier for automotive and industrial control systems. According to the manufacturer datasheet, the device contains four independent, high-gain, internally frequency-compensated amplifiers and operates from a single power supply. The package is the 14-SO surface-mount format, which makes it useful when several analog functions must be consolidated on one board.
What is the maximum supply voltage of LM2902HDT?
The LM2902HDT supports a maximum supply voltage of 30 V. This rating is stated in the STMicroelectronics LM2902HDT family documentation and applies to the quad operational amplifier device. The rating allows operation from a single supply, but the complete input common-mode range and output swing still depend on the actual supply voltage used in the circuit.
How many operational amplifiers are inside LM2902HDT?
The LM2902HDT contains four independent operational amplifiers. The manufacturer describes them as high-gain and internally frequency-compensated circuits designed for automotive and industrial control systems. The four channels share one 14-SO package but do not require a common signal input, so they can be assigned to separate functions such as sensor conditioning, filtering, buffering, or control feedback.
Can LM2902HDT operate from a single power supply?
Yes, the LM2902HDT is designed to operate from a single power supply. Its internal architecture supports common single-supply signal-conditioning arrangements, provided the applied signal and output voltages remain within the amplifier's specified common-mode and output-swing limits. Supply bypassing and grounding remain important because the available output range depends on the voltage headroom around the power rails.
Where can I download the LM2902HDT datasheet PDF?
The LM2902HDT datasheet PDF is available through the STMicroelectronics family documentation linked from the Datasheets.com product page at https://www.datasheets.com/stmicroelectronics/lm2902hdt. Use the manufacturer datasheet for the authoritative pin description, electrical limits, recommended application circuit, and package information. The linked document is suitable for design review and PCB implementation of the 14-SO device.
Where is the LM2902HDT pinout located?
The LM2902HDT pinout is shown in the manufacturer datasheet associated with the 14-SO package. For board layout, use the pin-description table rather than inferring connections from amplifier order: the package contains four amplifier channels plus the supply pins. Verify the numbering shown in the diagram against the exact ordering information before routing PCB tracks or assigning input and output nets.
Where can I buy LM2902HDT and check its current price?
Use the Request a Quote form on this XAIPART page to request the current LM2902HDT price, stock position, and lead time. The manufacturer and distributor product links on this page provide additional documentation, but live commercial terms can change and are best confirmed through a current quotation for the exact 14-SO ordering code.
What is the lead time for LM2902HDT?
The current LM2902HDT lead time is best requested through the Request a Quote form on this page using the exact MPN LM2902HDT. Lead time can vary with order quantity, inventory, packaging format, and manufacturing conditions, so engineers should obtain a current commitment before fixing the production schedule.
Is LM2902HDT in stock?
Current LM2902HDT stock status is not fixed on this product page because inventory changes rapidly. Submit a Request a Quote for LM2902HDT to receive the current availability, quantity breaks, and lead-time information for the exact ordering code.
What is the difference between LM2902HDT and LM2902HD?
LM2902HDT is the temperature-graded ordering code associated with the STMicroelectronics 14-SO quad operational amplifier family, while LM2902HD is another ordering option in the same family. The exact temperature grade, packing method, and commercial identifiers must be confirmed from the manufacturer ordering table. For a board-level substitution, verify that the package, pinout, temperature range, and electrical limits match the intended design.
When should I choose LM2902HDT over another quad op amp?
Choose LM2902HDT when the design needs four low-power general-purpose amplifiers, single-supply operation, and a 14-SO footprint for automotive or industrial control equipment. Select another quad amplifier instead when the circuit requires substantially wider bandwidth, lower offset voltage, rail-to-rail inputs or outputs, lower noise, or a different package. Compare those requirements against the LM2902HDT family limits before finalizing the amplifier choice.
What is the best drop-in replacement for LM2902HDT?
The best drop-in replacement is the device that matches the 14-SO pinout, supply rating, amplifier count, temperature grade, and required electrical characteristics. TI states that LM2902B is a drop-in upgrade for LM2902-family devices, while STMicroelectronics also offers related LM2902 ordering codes. Confirm the exact suffix, electrical limits, and qualification requirements before releasing a replacement to production.
Can LM2902HDT replace LM324 in a circuit?
The LM2902HDT can be considered for LM324-style circuits when the original device is the automotive-grade LM2902 and the replacement retains the required package and electrical ratings. TI identifies LM324B and LM2902B as next-generation drop-in options for legacy LM224, LM324, and LM2902 devices. Do not assume every LM324 variant is interchangeable without checking pinout, supply voltage, temperature range, and qualification.
LM2902HDT vs LM2902KV - which is better for industrial control?
LM2902HDT is better when the design specifically requires the STMicroelectronics 14-SO LM2902HDT ordering code and its automotive-oriented family characteristics. LM2902KV is a TI 30 V quad amplifier with a 1.2 MHz unity-gain bandwidth and stated operation from -40°C to 125°C. The better choice depends on exact electrical limits, qualification, availability, and second-source requirements rather than the family name alone.
What are the key specifications of LM2902HDT that engineers should know?
The LM2902HDT key specifications are four independent high-gain amplifiers, internal frequency compensation, single-supply operation, and a 30 V maximum supply rating in a 14-SO package. The device is designed for automotive and industrial control systems. Input offset, bias current, bandwidth, common-mode range, output swing, and temperature limits should be taken directly from the manufacturer datasheet for the final design.

Mühendislik referans verileri: LM2902HDT — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose LM2902HDT for automotive or industrial control designs that require four low-power, general-purpose amplifiers in a 14-SO package with single-supply operation and a 30 V maximum supply rating. The quad architecture is particularly useful when the design needs several independent signal-conditioning, filtering, feedback, or monitoring channels in a limited board area. Select LM2902HD, LM2902HYD, LM2902HYDT, LM2902, or LM2902H only after checking the exact ordering-code temperature grade, packing method, and electrical limits. Choose LM2902KV when its documented TI performance and 1.2 MHz bandwidth are preferable and the second-source strategy calls for a different manufacturer. Do not select this device for high-speed, precision, or rail-to-rail applications without verifying bandwidth, offset, common-mode range, output swing, and noise requirements.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün LM2902HD LM2902HYD LM2902HYDT LM2902 LM2902H
Package 14-SO 14-SO 14-SO 14-SO 14-SO 14-SO
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Number of Amplifiers 4 4 4 4 4 4
Maximum Supply Voltage 30 V 30 V 30 V 30 V 30 V 30 V
Supply Configuration Single supply Single supply Single supply Single supply Single supply Single supply
Frequency Compensation Internal Internal Internal Internal Internal Internal
Primary Application Automotive and industrial control Automotive and industrial control Automotive and industrial control Automotive and industrial control Automotive and industrial control Automotive and industrial control
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

Ana Farklılayıcılar

  • Four independent amplifiers in one package (karşılaştırma:LM324AN/PB)
  • Single-supply operation with 30 V maximum supply voltage (karşılaştırma:LM2902HD)
  • Automotive and industrial control positioning (karşılaştırma:LM2902KV)

Tasarım Notları

Place the supply bypass capacitor close to the V+ and V- pins and follow the manufacturer recommendation for the capacitor value and connection. Decoupling is especially important because the LM2902HDT is used in automotive and industrial systems where supply wiring can be long and noisy. Keep the ground return short and connect the bypass return directly to the device ground pin rather than routing it through a shared high-current path.

Do not assume that the 30 V maximum supply rating permits operation at every input or output level. Before applying signals, verify the common-mode input range, output swing, input offset, and bias-current limits in the manufacturer datasheet. In single-supply circuits, bias the signal into the usable input region and provide adequate output headroom. Also check that unused amplifier inputs are not left floating, because floating inputs can create unpredictable output states and excessive channel-to-channel coupling.

Route the four amplifier channels according to their independent pin assignments and keep feedback resistors and input networks close to the associated amplifier pins. Separate sensitive high-impedance input traces from power switches, motor outputs, and other high-current paths. A continuous ground plane is preferred, with analog return currents kept away from digital switching returns. Verify the 14-SO land pattern and pin numbering against the manufacturer package drawing before PCB release.

For active filters and instrumentation stages, minimize leakage and parasitic capacitance by placing feedback and compensation networks directly beside their corresponding pins. Avoid long traces at high impedance because they increase susceptibility to coupled noise and input bias-current errors. If the circuit drives a capacitive load, review the manufacturer stability guidance and use an isolation resistor or other suitable compensation arrangement when required.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The manufacturer family documentation positions the LM2902HDT for automotive and industrial control applications, but the provided product listings do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Veri doğrulanma tarihi: 2026-11-17 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

LM2902HDT datasheet LM2902HDT datasheet pdf LM2902HDT pinout LM2902HDT equivalent LM2902HDT replacement LM2902HDT price LM2902HDT stock STMicroelectronics LM2902HDT LM2902HDT 14-SO op amp LM2902HDT automotive sensor conditioning LM2902HDT vs LM2902KV LM2902HDT industrial control amplifier

İlgili Bileşenler ve Terimler

STMicroelectronics LM2902HDT LM2902HD LM2902HYD LM2902HYDT LM2902 LM2902H LM324AN/PB LM2902KV Operational amplifier Op amp Quad amplifier Low-power amplifier Single-supply operation Frequency compensation Voltage gain Common-mode input range Output swing Input offset voltage Input bias current 14-SO package Surface-mount package Automotive control systems Industrial control systems Signal conditioning
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle