LPC4330FET180Y - Dual-Core 204MHz MCU | NXP
MPN: LPC4330FET180Y ✓ AktifLPC4330FET180Y Genel Bakış
A microcontroller is a programmable semiconductor that integrates a processor core, memory interface, peripherals, and I/O into one device. The LPC4330FET180Y belongs to the Arm Cortex-M family of 32-bit embedded processors. Its Cortex-M4 core supports single-cycle multiply-accumulate, SIMD instructions, and hardware floating-point operations, while the Cortex-M0 coprocessor can handle I/O and digital-control tasks. This division supports responsive signal processing without relying on an external processor.
The device combines 264 kB of SRAM with two high-speed USB interfaces and integrated Ethernet, CAN, AES, SPIFI, and SGPIO functions. Its 118 I/O lines and 32-bit external data bus suit designs that need substantial parallel connectivity. The manufacturer lists LPC4330FET180 as active, while LPC4330FET180Y denotes the orderable temperature and packaging configuration associated with that product.
The mixed Cortex-M4 and Cortex-M0 architecture separates computationally intensive floating-point and DSP work from interrupt-driven peripheral control. The Cortex-M4 core can execute DSP-oriented instruction sequences efficiently, while the Cortex-M0 coprocessor handles real-time control tasks and external communication servicing. This combination can reduce the complexity of designs that would otherwise require multiple processors or a higher-cost application processor.
Typical applications include industrial control systems, networked embedded equipment, USB-to-Ethernet gateways, motor and motion controllers, instrumentation, CAN-connected machines, and high-speed data-acquisition equipment. The broad I/O count and integrated communication interfaces are particularly useful when the design must consolidate several peripheral functions onto a single board.
Designers should verify the exact ball assignments, power-supply requirements, boot configuration, external memory interface, and high-speed signal-integrity constraints in the NXP datasheet before layout. A 180-pin TFBGA also requires careful escape routing, via-in-pad or via-under-bump process selection, and a thermal-aware ball grid design rather than a simple two-layer assembly.
This product overview consolidates the core architecture, memory capacity, package information, communication features, application fit, and practical PCB considerations into one engineering reference. It is designed to accelerate part selection while preserving the importance of checking the manufacturer documentation for production implementation details.
Drop-in alternatifler için LPC4330FET180Y — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinLPC4330FET180Y Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | 32-bit dual-core microcontroller |
| Main Processor Core | Arm Cortex-M4 with Cortex-M0 coprocessor |
| Azami Saat Hızı | 204 MHz |
| Secondary Clock Frequency Specification | 25 MHz |
| Internal SRAM | 264 kB |
| Program Memory | ROMless |
| High-Speed USB Interfaces | 2 interfaces |
| Ethernet Support | Yes |
| CAN Support | Yes |
| Hardware Encryption | AES |
| External Storage Interface | SPIFI |
| Serial GPIO | SGPIO |
| Besleme Gerilimi | 3.3 V |
| I/O Lines | 118 lines |
| External Data Bus Width | 32 bits |
| External Address Bus Width | 24 bits |
| Paket | 180-pin TFBGA, 12 mm x 12 mm |
| Montaj Türü | Surface mount |
LPC4330FET180Y 180-pin tfbga, 12 mm x 12 mm Pin Yapısı Kılavuzu
LPC4330FET180Y (180-pin tfbga, 12 mm x 12 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: LPC4330FET180Y.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
LPC4330FET180Y için uygundur 6 uygulamas: Industrial Automation Controller, USB-to-Ethernet Communication Gateway, CAN-Connected Machine Control, High-Speed Data Acquisition System, Motor Control and Motion System, Secure Networked Embedded Equipment.
Industrial Automation Controller
The LPC4330FET180Y fits industrial automation equipment that combines real-time control with communication-heavy supervisory functions. Its 204 MHz Arm Cortex-M4 core can execute control and signal-processing tasks, while the Cortex-M0 coprocessor handles interrupt-driven I/O and digital control. The 118 I/O lines provide substantial parallel connectivity for sensors, actuators, status indicators, and discrete machine controls. Integrated CAN, Ethernet, USB, AES, and SPIFI functions also reduce the number of separate interface devices needed around the processor. Because the MCU is ROMless, the system must include an appropriate external nonvolatile storage arrangement and carefully map its memory interface.
USB-to-Ethernet Communication Gateway
The LPC4330FET180Y is suited to gateways that translate between USB and Ethernet while maintaining protocol-processing performance. Two high-speed USB interfaces and integrated Ethernet give the design a direct path for local host or peripheral connectivity and network communication. The Cortex-M4 core can handle protocol and packet-processing workloads, while the Cortex-M0 coprocessor can service lower-latency peripheral tasks. With 264 kB of SRAM, the device also has meaningful working memory for buffers and protocol state. Final implementation still requires confirmation of the Ethernet PHY interface, USB mode, external flash arrangement, boot flow, and latency under the expected network load.
CAN-Connected Machine Control
The LPC4330FET180Y can serve as the central controller in CAN-connected machinery because it combines a 204 MHz Cortex-M4 core, a dedicated Cortex-M0 control coprocessor, and an integrated CAN interface. The M4 core can handle higher-level sequencing or signal-processing calculations, while the M0 core supports responsive digital and I/O servicing. Its 118 I/O lines make it practical to connect encoders, discrete inputs, outputs, and communication isolation circuitry around one controller. AES hardware is useful for protecting selected control data or authenticated links. Deployment requires careful CAN transceiver selection, isolation strategy, bus timing configuration, thermal analysis, and validation of the controller’s worst-case response time.
High-Speed Data Acquisition System
The LPC4330FET180Y fits data-acquisition systems that must process measurements while maintaining multiple communication paths. Its 204 MHz Cortex-M4 core supports single-cycle multiply-accumulate, SIMD instructions, and hardware floating-point operations, while 264 kB of SRAM supports working buffers and data movement. The Cortex-M0 coprocessor can offload control and peripheral servicing from the primary processing core. Two high-speed USB interfaces, Ethernet, and SGPIO broaden the options for transferring synchronized data to a host, network, or adjacent processing stage. Engineering validation should include signal-chain bandwidth, external memory timing, interrupt latency, data buffering strategy, and synchronization across the USB, Ethernet, and sensor interfaces.
Motor Control and Motion System
The LPC4330FET180Y is applicable to sophisticated motion-control systems that divide real-time peripheral work from higher-level computation. The Cortex-M0 coprocessor can manage I/O and digital control while the Cortex-M4 core performs timing calculations, control algorithms, and floating-point processing. The 118 I/O lines support encoders, capture or compare functions, digital communication links, and discrete control signals. Integrated CAN, Ethernet, USB, and AES extend the design beyond a local motor controller into networked machinery or serviceable industrial equipment. A production design must verify PWM and capture resources, external memory timing, low-latency interrupt routing, thermal performance, and the safe operating behavior required by the motor drive.
Secure Networked Embedded Equipment
The LPC4330FET180Y supports secure networked equipment by combining Ethernet, USB, CAN, hardware AES, and a high-performance dual-core processor in one device. The Cortex-M4 core can execute protocol processing and application tasks, while the Cortex-M0 coprocessor can service communication peripherals and deterministic I/O. The 118 I/O lines provide ample access to sensors, local controls, and status interfaces without requiring a companion microcontroller for every task. Hardware AES can accelerate cryptographic operations, although secure product design still requires correct key management, unique device identity, trusted boot strategy, and protection against fault injection. The ROMless architecture means firmware storage and update mechanisms must be designed as part of the complete platform.
Mühendislik referans verileri: LPC4330FET180Y — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Package | 180-pin TFBGA, 12 mm x 12 mm |
| Brand | NXP Semiconductors |
| Processor Architecture | Arm Cortex-M4 with Cortex-M0 coprocessor |
| Maximum Clock Frequency | 204 MHz |
| Internal SRAM | 264 kB |
| Program Memory | ROMless |
| High-Speed USB Interfaces | 2 interfaces |
| I/O Lines | 118 lines |
| Supply Voltage | 3.3 V |
| Integrated Communications | Ethernet, CAN, 2 HS USB, SGPIO |
Ana Farklılayıcılar
- Dual-core workload separation (karşılaştırma:Single-core Cortex-M4 microcontrollers)
- High peripheral integration (karşılaştırma:Single-core Cortex-M microcontrollers)
- Substantial integrated working memory (karşılaştırma:Lower-RAM Cortex-M4 microcontrollers)
Tasarım Notları
Use the exact LPC4330FET180 land pattern and ball-reference drawing rather than constructing a generic 180-pin TFBGA footprint. Preserve the recommended ball-pitch geometry, solder-mask and paste features, exposed-pad treatment, and assembly tolerances specified by NXP. Route USB, Ethernet, and other high-speed pairs as controlled-impedance nets, and place decoupling and support components according to the manufacturer reference layout.
The LPC4330FET180Y is ROMless, so the external memory interface and boot architecture must be treated as core parts of the PCB design. Check signal timing, voltage compatibility, address decoding, and the exact data and address bus widths against the selected memory. Maintain the documented interface topology and keep external memory routing away from sensitive clock and high-speed communication paths wherever the layout guidance permits.
Estimated: evaluate thermal rise with the actual M4 and M0 utilization, clock rate, external-bus activity, and local ambient temperature. Power dissipation depends on workload and operating frequency, so a numerical junction-temperature result requires measured or modeled values. Provide ground-ball connections, solid copper planes, and thermal vias beneath or near the device where the package drawing permits them, then confirm the assembly process can retain the required thermal interface.
Allocate continuous return paths beneath high-speed signal pairs and keep USB and Ethernet routing clear of noisy switching nodes. Check edge-rate-driven bandwidth and impedance using the actual interface requirements rather than clock frequency alone. External memory timing can be sensitive to trace length and return-path discontinuities, so follow the NXP layout reference and validate the finished board with signal-integrity measurements before production release.
Do not substitute the base LPC4330FET180 designation for the full LPC4330FET180Y ordering code without checking the ordering-information table. Confirm temperature grade, packaging, and tape-and-reel configuration before releasing a purchase order. Similarly, do not infer automotive qualification, RoHS status, or REACH status from the family name; request the current manufacturer declarations for the exact ordering configuration.
Uyumluluk Bilgisi
The exact compliance and qualification status of the LPC4330FET180Y ordering configuration is not stated in the product information. Confirm current declarations with NXP before procurement.
