M2GL010-VF400I - 12K LE IGLOO2 FPGA | Microchip
MPN: M2GL010-VF400I ✓ AktifM2GL010-VF400I Genel Bakış
An FPGA is a semiconductor whose digital logic, routing, and selected I/O behavior are configured after manufacture. Within the product hierarchy, the M2GL010-VF400I is a low-density FPGA in the IGLOO 2 family, which belongs to the broader programmable-logic and semiconductor categories. Its flash configuration supports repeated programming without requiring a separate external configuration PROM, making it suitable for compact embedded systems whose firmware or control logic must be updated in the field.
The IGLOO 2 architecture provides 12K logic elements and 195 I/O in the specified 400-LFBGA option. The large I/O count enables the device to bridge dissimilar interfaces, expand parallel I/O channels, implement system-management functions, and combine multiple peripheral functions on one board. The 400-ball grid also supports dense PCB layouts where connector, memory, and communication interfaces require numerous external connections.
The VF400I ordering code identifies the 400-LFBGA configuration with industrial temperature treatment. System designers should use the Microchip IGLOO 2 datasheet and pin-information user guide to confirm bank voltages, pin functions, configuration pins, power requirements, and package dimensions before assigning PCB tracks. Because the FPGA uses multiple I/O banks, compliant voltage planning is essential for reliable operation across the complete design.
Typical uses include industrial bridging and protocol conversion, I/O expansion, secure connectivity, communications infrastructure, medical equipment, defense systems, and embedded control. A designer can use the FPGA to consolidate discrete glue logic, implement deterministic protocol converters, or provide programmable interfaces that are difficult to map efficiently into a microcontroller. Its 12K logic-element capacity offers a practical balance between functional density, power, and design complexity.
PCB planning should separate sensitive clock and configuration routing from noisy switching nodes, use short return paths for supply distribution, and provide the decoupling and plane connectivity required by the selected I/O standards. Validate high-speed interfaces with realistic source and termination conditions, and confirm all pin assignments against the package-specific user guide. The industrial-grade device also requires attention to thermal conditions when many I/O banks operate simultaneously at high toggle rates.
This product page combines device identity, package characteristics, confirmed IGLOO 2 capabilities, drop-in replacement candidates, application guidance, and design checks. It helps engineers evaluate the M2GL010-VF400I for a 400-LFBGA design while preserving the distinction between documented electrical specifications and information that must be confirmed from the manufacturer datasheet.
Drop-in alternatifler için M2GL010-VF400I — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller M2GL010-VF400I (aynı form faktörü ve ayağa oturma) — farklı olan Logic Elements, FPGA Family, Package, Device Type.
M2GL010-VF400
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →M2GL010TS-VF400I
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
M2GL010-VFG400I
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
M2GL010-VF400I Maksimum Değerlendirmeler & Elektriksel Özellikler
| FPGA Family | IGLOO 2 |
| Device Type | Low-density flash FPGA |
| Logic Elements | 12K logic elements |
| User I/O Count | 195 I/O |
| Paket | 400-LFBGA |
| Ball Count | 400 balls |
| Configuration Memory | Flash |
| Temperature Grade | Industrial |
| Montaj Türü | Surface mount |
| RoHS Durumu | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
M2GL010-VF400I 400-lfbga Pin Yapısı Kılavuzu
M2GL010-VF400I (400-lfbga paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: M2GL010-VF400I.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
M2GL010-VF400I için uygundur 6 uygulamas: Industrial Protocol Bridging, Communications Control Plane, I/O Expansion and System Management, Medical Monitoring Equipment, Defense and Secure Connectivity, Video and Image Processing Support.
Industrial Protocol Bridging
The M2GL010-VF400I fits industrial bridging designs because its 12K logic elements can implement deterministic format conversion, buffering, arbitration, and state-machine logic while 195 I/O provide substantial board-level connectivity. Place the FPGA between dissimilar interfaces, constrain timing-sensitive paths, and use its flash configuration to retain the bridge design in the field. Because the device uses multiple programmable I/O banks, verify every interface voltage against the Microchip IGLOO 2 datasheet before release. The 400-LFBGA footprint supports compact interface-dense equipment, although high-speed routing requires disciplined return paths and clean references.
Önerilen
Communications Control Plane
The M2GL010-VF400I can implement communications control-plane logic where parallel datapath traffic must be converted, framed, buffered, or monitored with predictable timing. Its 12K logic elements are suitable for moderate protocol overhead, while 195 I/O allow interface consolidation without requiring several small programmable devices. Use dedicated logic to implement packet framing, flow control, error checking, and test instrumentation. Designers should isolate clock domains, assign pins only from the VF400 package guide, and verify switching activity and I/O standards to avoid timing or signal-integrity failures.
Önerilen
I/O Expansion and System Management
The M2GL010-VF400I is appropriate for I/O expansion and system-management functions because 195 I/O provide more connectivity than a low-pin-count microcontroller. The FPGA can collect status signals, drive discrete outputs, translate voltage domains where supported, and implement supervisory logic alongside compact glue logic. Its 12K logic elements allow the design to consolidate functions that would otherwise occupy multiple fixed-function ICs. Confirm bank-level voltage limits, pin multiplexing, and configuration behavior in the package-specific documents. Firmware and logic updates can also be maintained through the device's flash configuration.
Önerilen
Medical Monitoring Equipment
The M2GL010-VF400I can support medical monitoring equipment as a programmable interface and control-logic device when system requirements are met. Its 12K logic elements can coordinate sensor acquisition sequencing, isolation between functional blocks, alarm logic, and data formatting, while 195 I/O provide flexible connections to analog front ends and communications modules. Flash configuration simplifies field maintenance and controlled design updates. Engineers must still verify operating-temperature limits, reliability expectations, external clock integrity, and applicable medical-product requirements for the finished equipment before using the device in a regulated product.
Önerilen
Defense and Secure Connectivity
The M2GL010-VF400I is suitable for programmable secure-connectivity and system-management functions in defense-related prototypes and applications where the exact device qualification satisfies the program requirements. The 12K logic elements can implement secure communication framing, key-transfer control, interface isolation, and administrative functions, while 195 I/O support multi-channel equipment. Its flash configuration allows controlled logic revisions, but developers should add appropriate external security, access-control, and tamper-response measures as required by the system design. Exact environmental, temperature, and lifecycle requirements must be confirmed for the deployed configuration.
Önerilen
Video and Image Processing Support
The M2GL010-VF400I can support modest video or image-processing functions where deterministic parallel pipelines, capture control, or format conversion are required. The 12K logic elements accommodate limited frame timing, lookup, filtering, and control functions, while 195 I/O allow parallel sensor, display, or memory interfaces. It is most appropriate for pipeline assistance and interface control rather than computationally intensive image processing. Match external memory and display interfaces to supported I/O standards, constrain all timing-critical paths, and validate video timing at the intended clock rates using the package-specific pin assignments.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: M2GL010-VF400I — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | M2GL010-VF400 | M2GL010TS-VF400I | M2GL010-VFG400I |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 400-LFBGA | 400-LFBGA | 400-LFBGA | 400-LFBGA |
| FPGA Family | IGLOO 2 | IGLOO 2 | IGLOO 2 | IGLOO 2 |
| Logic Elements | 12K logic elements | 12K logic elements | 12K logic elements | 12K logic elements |
| User I/O | 195 I/O | 195 I/O | 195 I/O | 195 I/O |
| Configuration Memory | Flash | Flash | Flash | Flash |
Ana Farklılayıcılar
- Exact 12K logic-element and 195-I/O configuration (karşılaştırma:M2GL010-VFG400I)
- Documented VF400 package family alignment (karşılaştırma:M2GL010TS-VF400I)
- Established family configuration (karşılaştırma:M2GL010-VF400)
Tasarım Notları
Use the Microchip IGLOO 2 Packaging and Pin Descriptions User Guide to create the VF400 land pattern, ball map, and I/O-bank assignments. Route each power ball according to the manufacturer's connection guidance, keep BGA escape traces short, and provide local decoupling where the reference design places it. Do not substitute the M2GL010-VFG400I or TS order code without checking every ball and configuration function.
Plan the supply network by identifying every I/O bank voltage and its permitted relationship to the core supply. Confirm allowable voltage combinations, sequencing, and external regulator tolerances in the manufacturer electrical tables. Separate sensitive reference distribution from high-toggle-rate I/O returns, and use a low-impedance plane structure so simultaneous switching does not create unacceptable supply displacement.
Assign external clock, reset, configuration, and high-speed interface pins directly from the VF400 package guide rather than relying on a generic M2GL010 diagram. Constrain clock paths first, provide continuous reference planes where interfaces require them, and match source and termination impedances through PCB stackup calculations. Validate eye diagrams and timing margins with realistic loading rather than ideal component models.
Estimated: power dissipation depends on core voltage, I/O voltage, device utilization, switching activity, and ambient temperature, none of which can be combined into a valid numerical estimate for this order code. In an actual design, calculate dynamic and static dissipation from the manufacturer operating-current tables, then size copper and thermal relief around the 400-LFBGA while accounting for the package's exposed-thermal features and PCB assembly constraints.
Uyumluluk Bilgisi
The industrial temperature designation does not establish AEC-Q100 qualification. No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for this exact order code.
