M2GL025T-VF256I - 27.6K LEs IGLOO2 FPGA | Microchip Technology
MPN: M2GL025T-VF256I ✓ AktifM2GL025T-VF256I Genel Bakış
An FPGA is a reconfigurable semiconductor whose digital logic, interconnect, and I/O behavior can be programmed after manufacture. Within the broader semiconductor hierarchy, an FPGA is a programmable-logic device that sits above fixed-function logic ICs and alongside microcontrollers, DSPs, and application-specific integrated circuits. It provides hardware parallelism for interface conversion, protocol bridging, control-plane logic, video or image processing, and other designs where a programmable architecture offers faster adaptation than a fixed circuit.
The IGLOO 2 family combines flash-based configuration with low-power logic resources for compact embedded systems. According to the Microchip IGLOO 2 FPGA and SmartFusion 2 SoC FPGA datasheet DS00004750, the M2GL025 device family covers five temperature grades. Its 27,696 logic elements and 138 I/O provide substantial implementation capacity for common control, interface, and data-movement functions while maintaining a relatively small 256-LFBGA footprint.
The M2GL025T-VF256I is identified as an industrial-temperature IGLOO 2 option. Configuration is stored in on-chip flash, allowing the programmed logic to be retained without continuously loading an external configuration file. Its broad I/O count supports connections to memory, sensors, communications PHYs, converters, and industrial peripherals. Exact I/O standards, voltage parameters, timing grades, and configuration limits should be selected from the electrical tables in datasheet DS00004750 and the package pin guide DS0124.
Typical uses include industrial bridge and protocol-conversion logic, medical control systems, defense equipment, video and image processing pipelines, and secure connectivity functions. The same-device family is also used in communications systems where deterministic parallel hardware is useful for control-plane processing, data acquisition, signal conditioning, and low-latency I/O management.
PCB implementation must follow the 256-ball LFBGA ball map and power, ground, configuration, and decoupling requirements in the Microchip package documentation. Differential pairs, high-speed interfaces, and sensitive inputs require controlled impedance, continuous return paths, and placement that minimizes simultaneous-switching noise. Confirm the selected bank voltage, pin constraints, and configuration interface before finalizing the layout.
This page combines the manufacturer family information, programming and pin resources, package characteristics, application guidance, and practical design checks needed to evaluate the M2GL025T-VF256I. It also distinguishes verified same-package alternatives from parts that require a different footprint, helping engineers make a PCB-safe replacement decision without confusing electrical similarity with true drop-in compatibility.
Drop-in alternatifler için M2GL025T-VF256I — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller M2GL025T-VF256I (aynı form faktörü ve ayağa oturma) — farklı olan Device Type, Logic Elements, Configuration Memory, Package, Package Type.
M2GL025T-1VF256
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →M2GL025T-VF256I Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | IGLOO 2 flash field-programmable gate array |
| Logic Elements | 27,696 logic elements |
| Programmable Gates | 1,130,496 gates |
| I/O Count | 138 I/O |
| Paket | 256-LFBGA |
| Configuration Memory | Embedded flash |
| Nominal Core Voltage | 1.2 V |
| Temperature Grade | Industrial |
| Montaj Türü | Surface mount |
| Device Family | IGLOO 2 |
| Supported Applications | Communications, industrial, medical, defense, and aviation |
| Programmable Logic Architecture | Flash FPGA |
| Ball Count | 256 balls |
M2GL025T-VF256I 256-lfbga Pin Yapısı Kılavuzu
M2GL025T-VF256I (256-lfbga paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: M2GL025T-VF256I.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
M2GL025T-VF256I için uygundur 6 uygulamas: Industrial Bridge and Protocol Conversion, Medical Equipment Control Logic, Communications Control Plane, Video and Image Processing, Secure Connectivity Control, Data Acquisition and Signal Conditioning.
Industrial Bridge and Protocol Conversion
The M2GL025T-VF256I fits industrial bridge, I/O-conversion, and system-management functions because it provides 27,696 logic elements and 138 I/O in a 256-LFBGA package. Parallel programmable logic can translate between bus widths, latch and time-multiplex signals, or combine control functions without requiring a separate microcontroller for every interface. The flash-based IGLOO 2 architecture also supports retained configuration across power cycles. Before schematic capture, map every external signal to the package ball map in user guide DS0124 and confirm the required I/O voltage standard and timing margin from datasheet DS00004750.
Önerilen
Medical Equipment Control Logic
The M2GL025T-VF256I can implement deterministic acquisition, control, monitoring, and data-routing logic for medical equipment without relying exclusively on a software processor. Its 27,696 logic elements and 138 I/O allow parallel sensor conditioning, status aggregation, alarm logic, and peripheral interfacing to be consolidated into one programmable device. The industrial-temperature ordering designation supports use in equipment requiring extended commercial operating conditions. Designers should still validate the complete electrical specification, isolation strategy, creepage requirements, and applicable medical standards at the system level rather than treating the FPGA qualification as system approval.
Önerilen
Communications Control Plane
The M2GL025T-VF256I is appropriate for communications control-plane, status, framing, and auxiliary interface logic where parallel hardware can provide predictable latency. Its 27,696 logic elements can implement protocol state machines, packet classification, register mapping, and data-path adaptation, while 138 I/O provide connections to processors, PHYs, memories, and status hardware. Because it is a low-density member of the IGLOO 2 family, resource utilization must be checked after synthesis and timing constraints must be closed for every synchronous interface. Use the selected bank voltage and pin constraints from the manufacturer documentation during board planning.
Önerilen
Video and Image Processing
The M2GL025T-VF256I supports modest video and image-processing pipelines that benefit from parallel logic, including pixel routing, thresholding, simple filtering, frame timing, and interface conversion. The available 27,696 logic elements and 138 I/O allow sensor input, control signals, memory interfaces, and display or processing-stage handoffs to be consolidated. Resource demand depends strongly on frame resolution, color depth, pixel clock, and storage architecture, so prototyping should begin with representative timing and video parameters. Confirm whether the required data rate fits the selected I/O standards and whether external memory bandwidth is sufficient.
Önerilen
Secure Connectivity Control
The M2GL025T-VF256I can support secure-connectivity designs by implementing programmable protocol handling, key-transfer sequencing, device authorization, status monitoring, and interface isolation between security and communication peripherals. Its embedded flash configuration supports persistent programmable logic across power cycles, while 27,696 logic elements and 138 I/O provide a practical platform for moderate control functions. Security strength ultimately depends on the algorithm, key-management architecture, implementation review, and platform controls rather than the FPGA family name. Validate timing, I/O voltage standards, configuration access requirements, and reset behavior before using the device in a security-sensitive network interface.
Önerilen
Data Acquisition and Signal Conditioning
The M2GL025T-VF256I is suitable for parallel data-acquisition front ends that must sample multiple inputs, apply digital filtering or calibration, format data, and transfer it to a processor or memory. The device's 138 I/O provide connections for sensor outputs, clocks, strobes, control signals, and data buses, while 27,696 logic elements support datapath and control pipelines. Because performance depends on clock rate, pin location, and I/O implementation, designers should establish a complete timing budget rather than relying on the logic-cell count alone. Review bank-voltage rules, clock-capable pins, input thresholds, and board-level signal integrity in the electrical datasheet.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: M2GL025T-VF256I — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | M2GL025T-1VF256 |
|---|---|---|
| Package | 256-LFBGA | 256-LFBGA |
| Brand | Microchip Technology | Microchip Technology |
| Device Family | IGLOO 2 | IGLOO 2 |
| Logic Elements | 27,696 | 27,696 |
| Programmable Gates | 1,130,496 | 1,130,496 |
| I/O Count | 138 I/O | 138 I/O |
| Speed Designation | T | -1 |
| Configuration Memory | Embedded flash | Embedded flash |
| Nominal Core Voltage | 1.2 V | 1.2 V |
Ana Farklılayıcılar
- Same-footprint replacement path within the M2GL025 family (karşılaştırma:M2GL025T-1VF256)
- Industrial-temperature device identification (karşılaştırma:M2GL025T-1VF256)
- Balanced logic and I/O capacity in a compact package (karşılaştırma:M2GL050-1VF400)
Tasarım Notları
Use the 256-LFBGA ball assignments in Microchip user guide DS0124 as the controlling layout reference. Place power and ground planes to provide low-impedance return paths for every bank, and route high-speed or differential nets over continuous reference planes. Confirm ball assignments, voltage standards, and configuration pins before routing because an incorrect ball map can create a board that requires respin even when the FPGA itself is electrically capable.
Implement the power architecture exactly as specified in datasheet DS00004750, including required sequencing, supply tolerances, decoupling, and configuration conditions. Place decoupling capacitors at the associated power balls with short, low-inductance return paths. Where multiple voltage banks are used, verify that every external driver remains powered or electrically isolated during configuration and reset so that no signal exceeds an allowed input condition.
Plan the 256-LFBGA escape routing before placing the FPGA. Reserve access to power, ground, configuration, clock, and user-I/O balls, then match board-layer transitions to the selected I/O standard. Keep clocks away from noisy switching nodes and avoid routing sensitive signals beneath areas with discontinuous return paths. The I/O standard and timing margin should be verified in simulation using the constraints matching the real PCB.
Do not treat another IGLOO 2 density or package as a drop-in replacement merely because its logic architecture is similar. A valid replacement must use the same 256-LFBGA footprint and satisfy resource, I/O, timing, temperature, and configuration requirements. Re-run synthesis, place-and-route, timing analysis, and pinout comparison for the exact substitute MPN; a package-name match alone does not prove functional equivalence.
Uyumluluk Bilgisi
The manufacturer family and package documents identify the device and its electrical characteristics, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact MPN.