MAX232ECPWRG4 - Dual RS-232 Transceiver | Texas Instruments
MPN: MAX232ECPWRG4 ✗ Son Kullanım ZamanıMAX232ECPWRG4 Genel Bakış
An RS-232 transceiver is an interface IC that bridges a digital logic system and a serial port using the voltage levels defined by the RS-232 standard. The MAX232 belongs to the hierarchy of interface ICs, serial interface transceivers, line drivers and receivers, and semiconductor components. It is useful when a controller, test instrument, industrial controller, or other digital system must communicate with an RS-232 port through a compact, low-power interface.
The MAX232ECPWRG4 includes two RS-232 drivers and two receivers in one package. According to the manufacturer datasheet, it operates from one 5 V supply, uses 1.0 µF charge-pump capacitors, and operates to 120 kbit/s. These characteristics make it suitable for legacy serial-port equipment, control systems, instrumentation, and point-of-sale equipment where RS-232 compatibility is required.
Its internal charge-pump circuitry generates the bipolar voltage levels required to drive RS-232 signals from a single low-voltage supply. The transmitter and receiver sections provide level translation in both directions, allowing a UART-compatible logic side to connect to a ±30 V-capable RS-232 side. The specified operating speed supports conventional serial links without requiring a high-speed differential interface.
The device also includes IEC 61000-4-2 ESD protection, a distinguishing feature for systems in which a connected cable can expose the interface to electrostatic discharge. Appropriate external protection, grounding, routing, and enclosure design remain necessary because the IC alone does not eliminate every system-level ESD hazard. Shielded or twisted-pair cable practices should be considered for longer or electrically noisy interconnects.
Because the MAX232ECPWRG4 is obsolete and no longer manufactured, engineers should plan a lifecycle review before starting a new production design. Existing equipment can use the part for repair or controlled redesign work, but new designs should compare active alternatives carefully for package, pinout, logic levels, charge-pump capacitance, data rate, and supply requirements. A candidate should not be treated as drop-in solely because it is described as a MAX232-family device.
This product page summarizes the device function, documented operating characteristics, package, lifecycle status, sourcing route, and engineering considerations. It also separates the obsolete target from similarly named MAX232 variants whose packages or protection options differ, helping buyers assess replacements without assuming that a different suffix is a direct substitute.
Drop-in alternatifler için MAX232ECPWRG4 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinMAX232ECPWRG4 Özellikler
| Product Type | Dual RS-232 line-driver and receiver IC |
| Number of Drivers | 2 drivers |
| Number of Receivers | 2 receivers |
| Besleme Gerilimi | 5 V single supply |
| Maximum Data Rate | 120 kbit/s |
| Receiver Input Levels | ±30 V |
| Charge-Pump Capacitor Value | 1.0 µF |
| ESD Protection Standard | IEC 61000-4-2 |
| RS-232 Compliance | TIA/RS-232-F and ITU-T V.28 |
| Paket | 16-pin TSSOP |
| Package Body Width | 4.40 mm |
| Montaj Türü | Surface mount |
| Pin Sayısı | 16 pins |
| Yaşam Döngüsü Durumu | Obsolete; no longer manufactured |
MAX232ECPWRG4 4.40 mm Pin Yapısı Kılavuzu
MAX232ECPWRG4 (4.40 mm paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: MAX232ECPWRG4.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MAX232ECPWRG4 için uygundur 6 uygulamas: Legacy RS-232 Control Interfaces, Point-of-Sale Terminal Interfaces, Industrial Serial Test Equipment, Instrumentation and Data Acquisition, RS-232 Service and Configuration Ports, Embedded Serial Peripheral Connectivity.
Legacy RS-232 Control Interfaces
The MAX232ECPWRG4 fits an existing controller board that uses a 16-pin TSSOP RS-232 interface and needs a direct functional continuation for maintenance. Its two transmitters and two receivers support two bidirectional RS-232 channels, while the documented 120 kbit/s rate covers conventional serial-port traffic. The device operates from one 5 V rail and uses 1.0 µF charge-pump capacitors. Because the component is obsolete, use it for an approved continuity program and validate lifecycle, traceability, and availability before committing production quantities.
Point-of-Sale Terminal Interfaces
A point-of-sale controller can use the MAX232ECPWRG4 to connect UART logic to an RS-232 peripheral when its PCB already implements the 16-pin TSSOP footprint. The two driver and two receiver channels permit more than one serial path, and the ±30 V receiver capability accommodates RS-232 signal levels commonly present on legacy equipment. The single 5 V supply simplifies integration with embedded control hardware. For a new product, however, the obsolete lifecycle makes an active equivalent with a verified pinout preferable to committing a new design around a discontinued device.
Industrial Serial Test Equipment
The MAX232ECPWRG4 is suitable for maintaining or redesigning test equipment that exchanges RS-232 commands with motors, analyzers, fixtures, or laboratory controllers. Its 120 kbit/s operating capability is appropriate for conventional control traffic, and the two transmit and two receive channels provide flexible point-to-point links. IEC 61000-4-2 ESD protection adds useful protection at the transceiver, but test engineers must still address cable routing, ground loops, and enclosure discharge paths. Verify operating temperature requirements against the manufacturer datasheet before industrial deployment.
Instrumentation and Data Acquisition
Data-acquisition equipment with a legacy RS-232 service port can retain the MAX232ECPWRG4 where the existing board uses its TSSOP-16 layout. The receiver tolerates ±30 V inputs, which supports direct interfacing to suitably designed RS-232 equipment, while the charge-pump arrangement allows operation from a single 5 V source. The interface can carry configuration commands or sampled control data at the documented 120 kbit/s rate. For laboratory products with long service lives, evaluate an active alternative and validate any conversion for timing, protection, and layout differences.
RS-232 Service and Configuration Ports
The MAX232ECPWRG4 can support service, configuration, or diagnostic ports embedded in legacy networking and communications equipment. Two RS-232 channels allow simultaneous transmit and receive paths without requiring separate driver and receiver packages. Its IEC 61000-4-2 protection is relevant when operators connect external cables, although correct chassis grounding and board layout remain essential. Because the exact MPN is obsolete, use it for repair or an approved transition plan. New products should begin with an active part and a complete footprint comparison rather than a schematic-only substitution.
Embedded Serial Peripheral Connectivity
Embedded systems with a logic-level UART can use the MAX232ECPWRG4 to bridge to a legacy RS-232 peripheral when the board layout matches the 16-pin TSSOP package. The dual-channel arrangement supports two transmit and two receive functions, and the single 5 V operation avoids requiring a separate negative supply. The interface is most appropriate for equipment where the legacy port is already designed into the PCB and service continuity takes priority over a new-component lifecycle. Verify signal timing, capacitor selection, and ESD layout against the manufacturer datasheet during any respin.
Mühendislik referans verileri: MAX232ECPWRG4 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Brand | Texas Instruments |
| Package | 16-pin TSSOP |
| Transmitter Channels | 2 |
| Receiver Channels | 2 |
| Supply Voltage | 5 V single supply |
| Maximum Data Rate | 120 kbit/s |
| Receiver Input Levels | ±30 V |
| Charge-Pump Capacitor Value | 1.0 µF |
| ESD Protection | IEC 61000-4-2 |
| Lifecycle Status | Obsolete; no longer manufactured |
Ana Farklılayıcılar
- Protected RS-232 transceiver in a compact TSSOP (karşılaştırma:MAX232EESE+T)
- Four-channel RS-232 interface (karşılaştırma:MAX232IDWRG4)
- Single-supply operation with established serial speed (karşılaştırma:MAX232EESE+T)
Tasarım Notları
Do not substitute a MAX232-family device from its name alone. MAX232ECPWRG4 uses a 16-pin TSSOP package, while the identified MAX232EESE+T comparison uses a different package option. Before changing a PCB, compare the manufacturer pin-description tables, land patterns, charge-pump capacitor connections, and ESD-protection arrangements. A mechanically different package requires a footprint and assembly redesign even if the RS-232 channel count and nominal speed are similar.
Follow the manufacturer application circuit for charge-pump capacitor placement and values. The documented circuit uses 1.0 µF capacitors, and their connection can be sensitive to loop area and high-frequency return paths. Place the external capacitors close to their designated pins and provide a low-impedance ground path. Review the footprint, exposed pad or thermal relief provisions, solder mask, and paste pattern against the exact package drawing before releasing a replacement PCB.
Treat the RS-232 cable interface as an electrostatic-discharge and conducted-noise entry point. The integrated IEC 61000-4-2 protection improves device-level resilience, but it does not replace a sound enclosure, chassis grounding, cable shielding, or board-level isolation strategy. Keep the transceiver and protection connection paths compact, avoid long unprotected traces, and verify that the external cable arrangement has an intentional chassis-to-signal-ground path to reduce common-mode transients.
Uyumluluk Bilgisi
IEC 61000-4-2 ESD protection and TIA/RS-232-F plus ITU-T V.28 compliance are identified for the device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not established by the available results.