MAX3221ECTE+T - 250kbps RS-232 Transceiver | Analog Devices
MPN: MAX3221ECTE+T ✓ AktifMAX3221ECTE+T Genel Bakış
An RS-232 transceiver is an interface integrated circuit that converts logic-level signals between a host or controller and a RS-232 port. Within the interface hierarchy, the MAX3221ECTE+T belongs to the RS-232 transceiver class, then to line-driver and line-receiver circuits, and ultimately to the broader communication-interface and semiconductor categories. Its charge-pump circuitry generates the bipolar voltage levels required by the RS-232 standard without a separate negative supply.
Key features include a 250 kbps maximum data rate, a 3.0 V to 5.5 V operating range, ±15 kV ESD protection, and 1 µA shutdown supply current. The device provides one transmit channel and one receive channel, making it suitable for compact point-to-point serial links. AutoShutdown reduces power consumption when the receiver detects no valid RS-232 activity, while automatic wakeup permits the circuit to resume operation when a valid signal returns.
The MAX3221 architecture integrates the transmitter, receiver, interface control, and charge-pump functions into one package. This consolidation simplifies PCB design by reducing the number of external interface components. The transmitter converts TTL/CMOS logic levels into RS-232 levels, while the receiver converts bipolar RS-232 inputs into a CMOS-compatible output. Internal protection and controlled slew behavior support reliable communication over cable connections exposed to electrostatic discharge.
Typical applications include industrial serial consoles, data-acquisition equipment, point-of-sale terminals, test and measurement instruments, and embedded control systems that require an RS-232 port with automatic power management. The 3.0 V minimum supply voltage also makes the device suitable for mixed 3.3 V and 5 V systems when the interface requires full RS-232 electrical levels rather than TTL signaling.
When laying out the circuit, place the charge-pump capacitors and the interface bypass capacitor close to their associated pins, and route the RS-232 connector traces away from sensitive analog or high-speed digital nets. Confirm the logic levels and polarity of the connected host because RS-232 is a single-ended, inverted bipolar interface and is not directly interchangeable with TTL UART signaling.
Drop-in alternatifler için MAX3221ECTE+T — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller MAX3221ECTE+T (aynı form faktörü ve ayağa oturma) — farklı olan Package, Product Type.
MAX3221ECTE+
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MAX3221EETE+
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MAX3221ECTE+T Özellikler
| Product Type | RS-232 Transceiver |
| Transmit Channels | 1 channel |
| Receive Channels | 1 channel |
| Maximum Data Rate | 250 kbps |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Shutdown Supply Current | 1 µA |
| ESD Protection | ±15 kV |
| Interface Standard | RS-232 |
| Standards Compatibility | EIA/TIA-232, V.28, V.24 |
| Power Management Feature | AutoShutdown with automatic wakeup |
| On-Chip Charge Pump | Yes |
| Paket | 16-pin TQFN, 5 mm x 5 mm |
| Montaj Türü | Surface Mount |
| Exposed Pad | Yes |
| Automotive Qualification | Not applicable |
MAX3221ECTE+T 16-pin tqfn, 5 mm x 5 mm Pin Yapısı Kılavuzu
MAX3221ECTE+T (16-pin tqfn, 5 mm x 5 mm paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: MAX3221ECTE+T.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MAX3221ECTE+T için uygundur 6 uygulamas: Industrial Serial Console Interface, Point-of-Sale Terminal Connectivity, Data-Acquisition and Test Equipment, Embedded Control and Configuration Port, Medical and Diagnostic Equipment, Network Equipment Maintenance Port.
Industrial Serial Console Interface
The MAX3221ECTE+T fits industrial consoles and service ports because it combines one transmitter, one receiver, and a 250 kbps data rate in a compact 16-TQFN package. Its 3.0 V to 5.5 V operating range supports both 3.3 V and 5 V control hardware, while the internal charge pump supplies the bipolar RS-232 levels required at the connector. AutoShutdown reduces the supply current to 1 µA when no valid receiver activity is present, making the interface appropriate for equipment that remains connected but is rarely used.
Önerilen
Point-of-Sale Terminal Connectivity
The MAX3221ECTE+T can connect a point-of-sale controller to a legacy RS-232 peripheral through its single transmit and receive channels. A maximum rate of 250 kbps provides more margin than many low-speed transaction ports require, while the 3.0 V to 5.5 V supply range simplifies integration with mixed-voltage processors. The 1 µA AutoShutdown state helps limit idle consumption when the peripheral is disconnected or the terminal spends long periods not receiving valid RS-232 data.
Önerilen
Data-Acquisition and Test Equipment
The MAX3221ECTE+T is appropriate for laboratory instruments and data-acquisition systems that require a short RS-232 control link. The 250 kbps data rate supports responsive command and response traffic, and ±15 kV ESD protection adds robustness at a connector that may be exposed to human contact. The device also fits instruments built around 3.3 V logic because it accepts a 3.0 V to 5.5 V supply while retaining true RS-232 electrical signaling.
Önerilen
Embedded Control and Configuration Port
The MAX3221ECTE+T gives an embedded controller a dedicated configuration or diagnostics port without requiring a separate negative supply. Its internal charge pump develops the RS-232 voltage levels, and AutoShutdown allows the interface to enter a 1 µA state until valid data is detected. This behavior is useful in equipment that must remain serviceable through a serial port while conserving standby power, especially when the 16-TQFN package helps limit board area.
Önerilen
Medical and Diagnostic Equipment
The MAX3221ECTE+T can support service and configuration ports on diagnostic or laboratory equipment where a conventional serial connection is required. Its ±15 kV ESD protection is valuable on user-accessible connectors, while the single-channel arrangement keeps the circuit compact. The 3.0 V to 5.5 V supply range accommodates modern embedded control boards, and automatic shutdown helps reduce power when the serial port is idle. Validate the complete medical system rather than certifying the interface IC alone.
Önerilen
Network Equipment Maintenance Port
The MAX3221ECTE+T is suitable for the isolated service or console port of a router, switch, or other communications appliance. The interface supports 250 kbps serial traffic from a 3.0 V to 5.5 V supply and provides ±15 kV ESD protection for a connector that may be used during installation. AutoShutdown limits idle consumption to 1 µA when no valid signal appears, while automatic wakeup restores operation when the technician connects a terminal.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MAX3221ECTE+T — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | MAX3221ECTE+ | MAX3221EETE+ |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 16-TQFN (5x5) | 16-TQFN (5x5) | 16-TQFN (5x5) |
| Transmit/Receive Channels | 1/1 | 1/1 | 1/1 |
| Maximum Data Rate | 250 kbps | 250 kbps | 250 kbps |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Shutdown Supply Current | 1 µA | 1 µA | 1 µA |
| ESD Protection | ±15 kV | ±15 kV | ±15 kV |
| Power Management | AutoShutdown with automatic wakeup | AutoShutdown | AutoShutdown |
| Interface Standard | RS-232 / EIA-TIA-232 / V.28 / V.24 | RS-232 / EIA-TIA-232 / V.28 / V.24 | RS-232 / EIA-TIA-232 / V.28 / V.24 |
| Orderable Suffix | ECTE+T | ECTE+ | EETE+ |
Ana Farklılayıcılar
- Low-power automatic interface management (karşılaştırma:MAX3221ECTE+)
- Same compact 16-TQFN footprint (karşılaştırma:MAX3221EETE+)
- Single-channel RS-232 with integrated charge pump (karşılaştırma:MAX3221ECTE+)
- Connector-level ESD robustness (karşılaştırma:MAX3221EETE+)
Tasarım Notları
Place the charge-pump capacitors, VCC bypass capacitor, and receiver/transmitter interface components directly beside their associated device pins. Keep the connector-side RS-232 traces away from clocks, ADC inputs, and precision analog nets. The 5 mm by 5 mm TQFN footprint leaves little room for routing mistakes, so verify the exposed-pad connection and pin-1 orientation against the package drawing before releasing artwork.
Design the supply around the 3.0 V to 5.5 V operating range and place local high-frequency decoupling close to VCC. AutoShutdown can reduce standby supply current to 1 µA, but the external bypass network and charge-pump capacitors must still meet the values and stability requirements specified in the manufacturer datasheet. Avoid placing the transceiver directly beside a switching regulator unless the layout includes adequate high-frequency isolation.
Do not treat the connector-side RS-232 pins as TTL UART signals. The transmitter accepts TTL/CMOS logic while the receiver produces a logic-compatible output, but the cable interface uses bipolar RS-232 levels with inverted signaling relative to many UART conventions. Verify the host logic levels, cable pinout, flow-control method, and whether the application needs hardware handshaking before finalizing the schematic.
Keep the RS-232 connector at a board edge and preserve the shortest practical connection to the transceiver. Route the driver output directly toward the connector without unnecessary stubs, and keep sensitive receiver inputs away from switching nodes and high-current loops. Although the device provides ±15 kV ESD protection, external protection and chassis-grounding strategy should still be reviewed for cables leaving the enclosure.
Uyumluluk Bilgisi
The product family is identified as an RS-232 communications interface IC, so AEC-Q100 automotive qualification does not apply. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified and remain unknown.