MC3302P - Quad Single-Supply Comparator | onsemi
MPN: MC3302P ✓ AktifMC3302P Genel Bakış
A comparator is an analog integrated circuit that compares two input voltages and produces a logic-level output indicating which input is higher. The MC3302P belongs to the comparator hierarchy, which also includes voltage comparators and differential amplifiers used in control and signal-conditioning systems. As a single-supply device, it is intended for systems where the comparator must operate from one supply rail while detecting small voltage differences within that rail.
The MC3302P's four channels provide practical space savings compared with four discrete comparators. Its typical 25 nA input bias current minimizes loading on high-impedance sensing nodes, while the typical ±5.0 nA input offset current supports accurate threshold decisions near the reference voltage. The device is suited to console, automotive, and industrial applications where level detection and low-level sensing must be implemented with a familiar 14-pin through-hole footprint.
Each channel compares an inverting and a non-inverting input and provides an open-collector output, allowing the outputs to be pulled up as required by the host logic and to support wired logic when several outputs are combined. The open-collector architecture provides design flexibility but requires an external pull-up resistor. The output transistor can sink current when the comparator condition is met, while the pull-up establishes the inactive high voltage.
Typical uses include battery threshold detection, sensor signal conditioning, window or level comparison, memory-control interfaces, and industrial control modules. Because this is a legacy-style PDIP device, it is especially relevant to maintenance of existing equipment rather than new space-constrained designs. Designers should confirm the exact pinout and output truth table against the manufacturer documentation before modifying an existing board.
The principal design consideration is supply bypassing. Place the required decoupling capacitor close to the device supply pins and return each comparator input directly to its pin rather than routing it through shared analog traces. Account for input offset and bias currents when setting very small thresholds, and use a pull-up resistor compatible with the required output rise time and available sink current.
This product record combines verified manufacturer and distributor information with package, application, design, and replacement guidance. It also distinguishes exact technical data from values that require confirmation, helping engineers source MC3302P parts without treating unsupported compatibility or price claims as verified facts.
Drop-in alternatifler için MC3302P — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
MC3302PG
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MC3302P
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MC3302P Maksimum Değerlendirmeler & Elektriksel Özellikler
| Comparator Type | Quad differential comparator |
| Number of Channels | 4 channels |
| Supply Configuration | Single supply |
| Maximum Supply Voltage | 30 V |
| Differential Input Voltage Range | ±15 V |
| Input Bias Current | 25 nA typical |
| Input Offset Current | ±5.0 nA typical |
| Çıkış Türü | Open collector |
| Paket | PDIP-14, 14 pins |
| Montaj Türü | Through-hole |
| RoHS Durumu | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
MC3302P pdip-14, 14 pins Pin Yapısı Kılavuzu
MC3302P (pdip-14, 14 pins paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: MC3302P.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MC3302P için uygundur 6 uygulamas: Battery Threshold Detection, Industrial Level Sensing, Automotive Electrical Monitoring, Memory Control Interface, Consumer Equipment Condition Monitoring, Legacy Equipment Repair.
Battery Threshold Detection
The MC3302P is suitable for monitoring a battery or supply rail near a defined threshold because it combines four single-supply comparator channels with a typical 25 nA input bias current. Place a resistor divider across the monitored voltage and apply the divided signal to one input while the other receives a precision reference. The open-collector output can directly drive a low-current status input when its voltage requirements are compatible. For low-current sensing, the 25 nA typical bias current is small relative to the divider current, while the ±5.0 nA typical offset can shift the comparison point. The primary tradeoff is that the comparator is specified for legacy through-hole industrial and automotive maintenance rather than compact battery-powered products.
Önerilen
Industrial Level Sensing
The MC3302P fits industrial level-detection circuits that compare a sensor-derived voltage against a reference and produce a logic transition when a threshold is crossed. Its four channels can implement separate tank, reservoir, flow, or alarm comparisons while retaining a common supply arrangement. The typical 25 nA input bias current minimizes disturbance of high-impedance probes, and the ±5.0 nA typical input offset current provides a useful starting point for threshold-error analysis. Because the output is open collector, a pull-up resistor can establish the interface voltage for a relay driver, optocoupler, PLC input, or status indicator. Field designs should include input filtering and protection because long sensor cables can introduce noise and ESD events.
Önerilen
Automotive Electrical Monitoring
The MC3302P can be used in legacy automotive electrical-monitoring designs that require multiple threshold comparisons on a 14-pin PDIP board. Four channels may monitor supply condition, sensor limits, or discrete warning signals while operating from a single supply. The verified family data identifies consumer, automotive, and industrial applications and rates the device for differential input voltages up to ±15 V and supply operation up to 30 V. The typical 25 nA input bias current helps preserve high-impedance sensor signals. However, the supplied excerpts do not establish the exact operating-temperature range or AEC-Q100 status, so this use requires confirmation from the applicable manufacturer document before qualification or volume production.
Önerilen
Memory Control Interface
The MC3302P is specifically identified for memory applications and can implement threshold comparisons around memory-control signals. Each channel compares a logic or memory-derived voltage with a reference and provides an open-collector result that can be pulled up to the appropriate interface voltage. The single-supply architecture allows all four channels to operate from one rail, reducing the number of separate components in legacy control boards. The typical ±5.0 nA input offset current is relevant when a small logic-level decision must be repeatable. Designers should still account for input propagation delay, pull-up capacitance, and system timing because those detailed timing values were not present in the supplied verified excerpts and must be taken from the manufacturer datasheet.
Önerilen
Consumer Equipment Condition Monitoring
The MC3302P is appropriate for legacy consumer equipment that performs multiple level checks using a quad comparator. Examples include detecting an out-of-range control voltage, comparing a sensor signal, or generating an alert when a supply-derived signal crosses a limit. The typical 25 nA input bias current limits loading on high-impedance dividers, while four channels reduce the component count compared with separate single comparators. The open-collector outputs support flexible pull-up selection for TTL, CMOS, relay, or indicator interfaces. In cost-sensitive maintenance designs, the PDIP package is advantageous because it permits direct replacement on an existing through-hole board. Production qualification should not rely on an inferred temperature grade or automotive approval, neither of which was confirmed by the supplied data.
Önerilen
Legacy Equipment Repair
The MC3302P is particularly valuable for repairing legacy industrial and consumer equipment built around a 14-pin PDIP quad comparator. Its single-supply operation, four-channel organization, and open-collector outputs align with older circuit architectures that use pull-up resistors and external logic interfaces. A direct replacement allows an engineer to retain the original PCB layout and connector arrangement rather than redesigning around a surface-mount package. During repair, verify the device markings, pin orientation, supply voltage, and pull-up network because archival inventory can include parts from different manufacturers. The ±5.0 nA typical input offset current should be considered when diagnosing a comparison point that differs slightly from the original design value.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MC3302P — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | MC3302PG | MC3302P |
|---|---|---|---|
| Package | PDIP-14 | PDIP-14 | PDIP-14 |
| Brand | onsemi | onsemi | STMicroelectronics |
| Comparator Channels | 4 | 4 | 4 |
| Mounting Type | Through-hole | Through-hole | Through-hole |
Ana Farklılayıcılar
- Four channels in one legacy-compatible package (karşılaştırma:Single comparators such as MC3403N in another package configuration)
- Low input loading for high-impedance sensing (karşılaştırma:Discrete comparator implementation)
- Small typical input offset current (karşılaştırma:Comparator alternatives with unspecified offsets)
- Single-supply level detection (karşılaştırma:Dual-supply comparator arrangements)
Tasarım Notları
Place the supply-decoupling capacitor immediately adjacent to the device supply pin and route the return directly to the ground plane. The verified material confirms operation up to 30 V but does not provide the required capacitance or supply-current limits, so those values must be taken from the manufacturer datasheet. Use a capacitor voltage rating appropriate for the actual rail and fault condition. Do not infer the bypass requirement from the older comparator family without checking the applicable MC3302 document.
Keep each inverting and non-inverting input route short, isolate it from switching nodes, and avoid sharing a narrow input trace among multiple channels. The typical 25 nA input bias current makes even moderate source impedances relevant, while the ±5.0 nA typical input offset can shift a precision threshold. Use a low-value reference divider or buffer where the required accuracy cannot tolerate divider loading. A solid ground reference under the DIP package also helps reduce output-return disturbance.
Do not omit the open-collector output pull-up resistor. Select it using the required logic-high voltage, maximum output sink current, allowable rise time, and the capacitance of the connected trace or load. Multiple open-collector outputs may be wired together only when the application permits wired logic and the resulting pull-up network remains valid. Verify the input and output truth table for the exact manufacturer source before replacing an archived Motorola device.
Uyumluluk Bilgisi
The supplied verified excerpts describe automotive and industrial applications but do not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. These fields remain unknown rather than being inferred from the application descriptions.
