MCP3422A0-E/MC - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip Technology
MPN: MCP3422A0-E/MC ✓ AktifMCP3422A0-E/MC Genel Bakış
An analog-to-digital converter, or ADC, converts continuous analog voltage into a digital representation for processing, measurement, or control. The MCP3422 belongs to the delta-sigma ADC family and the broader analog-to-digital converter category within Microchip's mixed-signal semiconductor portfolio. Its differential inputs are suited to measuring small voltage changes between paired sensor or signal nodes while rejecting common-mode disturbance when the circuit is implemented effectively.
The principal features include 18-bit resolution, two differential input channels, a 3.75 SPS conversion rate, and an onboard 2.048 V reference. The device operates from 3.3 V or 5 V and communicates through I2C. The MCP3422A0-E/MC ordering variant is identified as automotive AEC-Q100 and is supplied in an 8-pin DFN exposed-pad package using a tube packing format.
Delta-sigma conversion is appropriate for precision measurement systems where conversion speed is secondary to resolution and noise performance. The MCP3422 family is designed for low-noise, high-accuracy acquisition, and the onboard reference provides a defined differential measurement span without requiring an external reference for basic operation. Differential input architecture helps the system distinguish a small sensor voltage from noise common to both input lines.
Typical applications include industrial process measurement, battery and power-system monitoring, temperature sensing with differential sensor bridges, pressure transducer acquisition, laboratory instrumentation, and automotive sensing systems. The two channels allow simultaneous connection of two related differential sensors, while I2C simplifies digital integration with a microcontroller or embedded controller.
A critical design consideration is common-mode and differential input range management. Each analog input must remain within the device's supported input and reference limits, and the exposed pad should be connected to ground according to the manufacturer's land pattern. Decoupling, I2C pull-ups, and analog trace routing should follow the manufacturer datasheet recommendations to preserve conversion accuracy.
This product page combines the verified MCP3422 family specifications, drop-in address-option comparisons, package details, application guidance, and practical PCB considerations to support faster component selection and implementation planning.
Drop-in alternatifler için MCP3422A0-E/MC — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller MCP3422A0-E/MC (aynı form faktörü ve ayağa oturma) — farklı olan Package, Differential Input Range, Conversion Rate, Resolution, Digital Interface.
MCP3422A1-E/MC
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MCP3422A2-E/MC
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MCP3422A3-E/MC
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MCP3422A4-E/MC
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MCP3422A5-E/MC
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MCP3422A0-E/MC Maksimum Değerlendirmeler & Elektriksel Özellikler
| ADC Resolution | 18 bit |
| Number of ADC Inputs | 2 differential inputs |
| ADC Architecture | Sigma-delta |
| Number of Converters | 1 |
| Conversion Rate | 3.75 samples per second |
| Mouser Listed Conversion Rate | 4 samples per second |
| Internal Reference Voltage | 2.048 V |
| Differential Input Range | ±2.048 V |
| Input Architecture | Differential |
| Digital Interface | I2C |
| Besleme Gerilimi | 3.3 V or 5 V |
| Paket | 8-pin DFN with exposed pad, 2 x 3 mm |
| Montaj Türü | Surface mount |
| Packaging | Tube |
| Automotive Qualification | AEC-Q100 qualified |
| Signal-to-Noise Performance | Low noise |
| Conversion Accuracy | High accuracy |
MCP3422A0-E/MC 8-pin dfn with exposed pad, 2 x 3 mm Pin Yapısı Kılavuzu
MCP3422A0-E/MC (8-pin dfn with exposed pad, 2 x 3 mm paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: MCP3422A0-E/MC.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MCP3422A0-E/MC için uygundur 6 uygulamas: Industrial Process Measurement, Battery and Power-System Monitoring, Precision Temperature Sensing, Pressure Transducer Acquisition, Laboratory Instrumentation, Automotive Sensing Systems.
Industrial Process Measurement
The MCP3422A0-E/MC fits industrial process monitoring where two slowly varying differential signals must be digitized with high resolution. Its 18-bit conversion resolution and approximately 3.75 SPS rate provide detailed measurements for temperature, pressure, flow, or level signals without demanding a high-speed sampling architecture. The onboard 2.048 V reference establishes a ±2.048 V differential range, while the I2C interface allows the measurements to be read by a microcontroller. Use differential input filtering and controlled routing to minimize conversion error and common-mode pickup.
Önerilen
Battery and Power-System Monitoring
MCP3422A0-E/MC is appropriate for monitoring two power-system voltages with 18-bit digital resolution. Its differential inputs can measure the voltage across paired sensing nodes, and the 2.048 V onboard reference provides a defined measurement span. At approximately 3.75 SPS, the converter suits changing battery, rail, or differential-sensing conditions rather than waveform capture. The I2C connection simplifies periodic readings by an embedded controller, while careful common-mode-range and grounding design is essential in high-voltage systems.
Önerilen
Precision Temperature Sensing
The MCP3422A0-E/MC can acquire two differential temperature-sensor channels when the signals are slowly varying and require high resolution rather than rapid sampling. Its 18-bit resolution helps preserve small temperature-related voltage changes, while differential inputs support bridge-style or differentially sensed temperature circuits. The approximately 3.75 SPS conversion rate is sufficient for thermal monitoring, and the onboard 2.048 V reference avoids a separate reference device in basic designs. Keep sensor wiring away from switching nodes and follow the sensor's recommended input-conditioning network.
Önerilen
Pressure Transducer Acquisition
MCP3422A0-E/MC is well matched to slow differential pressure-sensor outputs that require accurate digital conversion. Two differential input channels allow separate sensor signals to be measured through the same I2C interface, and the 18-bit resolution is useful when the usable signal occupies only part of the ±2.048 V input range. Its 3.75 SPS rate accommodates many pressure-monitoring applications without unnecessary conversion speed. Proper input filtering, common-mode compliance, and sensor grounding remain the primary analog-design considerations.
Önerilen
Laboratory Instrumentation
The MCP3422A0-E/MC can serve as the measurement ADC in laboratory equipment that reads two precision differential sensor outputs. The combination of 18-bit resolution, low-noise delta-sigma conversion, an onboard 2.048 V reference, and I2C provides a compact acquisition channel for slowly varying signals. At approximately 3.75 SPS, it is intended for precision measurements rather than oscilloscope-like waveform acquisition. Designers should characterize offset, noise, input impedance, and analog filtering in the complete measurement chain.
Önerilen
Automotive Sensing Systems
MCP3422A0-E/MC is identified as an automotive AEC-Q100 variant and is suitable for electronic sensing systems requiring two differential ADC channels. The 18-bit resolution and approximately 3.75 SPS conversion rate support accurate acquisition of slowly varying vehicle parameters, such as temperature, pressure, or supply-related voltages. I2C provides a compact connection to an automotive controller, while the 8-pin DFN package supports space-constrained boards. Final qualification and environmental suitability must be confirmed for the specific vehicle platform.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MCP3422A0-E/MC — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | MCP3422A1-E/MC | MCP3422A2-E/MC | MCP3422A3-E/MC | MCP3422A4-E/MC | MCP3422A5-E/MC |
|---|---|---|---|---|---|---|
| Package | 8-pin DFN with exposed pad, 2 x 3 mm | 8-pin DFN with exposed pad, 2 x 3 mm | 8-pin DFN with exposed pad, 2 x 3 mm | 8-pin DFN with exposed pad, 2 x 3 mm | 8-pin DFN with exposed pad, 2 x 3 mm | 8-pin DFN with exposed pad, 2 x 3 mm |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| ADC Resolution | 18 bit | 18 bit | 18 bit | 18 bit | 18 bit | 18 bit |
| Number of Inputs | 2 differential inputs | 2 differential inputs | 2 differential inputs | 2 differential inputs | 2 differential inputs | 2 differential inputs |
| Conversion Rate | 3.75 samples per second | 3.75 samples per second | 3.75 samples per second | 3.75 samples per second | 3.75 samples per second | 3.75 samples per second |
| Internal Reference | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V |
| Differential Input Range | ±2.048 V | ±2.048 V | ±2.048 V | ±2.048 V | ±2.048 V | ±2.048 V |
| Digital Interface | I2C | I2C | I2C | I2C | I2C | I2C |
| Supply Voltage | 3.3 V or 5 V | 3.3 V or 5 V | 3.3 V or 5 V | 3.3 V or 5 V | 3.3 V or 5 V | 3.3 V or 5 V |
| I2C Address Option | A0 address option | A1 address option | A2 address option | A3 address option | A4 address option | A5 address option |
| Packaging | Tube | Tube | Tube | Tube | Tube | Tube |
Ana Farklılayıcılar
- Two differential channels in a compact package (karşılaştırma:MCP3422A3-E/MC)
- Onboard 2.048 V reference supports defined differential measurements (karşılaştırma:MCP3422A1-E/MC)
- Automotive AEC-Q100 identification for the target ordering variant (karşılaştırma:MCP3422A2-E/MC)
Tasarım Notları
Route the two differential input channels as tightly matched pairs and keep them away from switching nodes, clock edges, and high-current return paths. Place input filtering components close to the ADC pins so that unwanted differential noise is minimized before conversion. The 2 x 3 mm DFN footprint demands careful land-pattern alignment, and the exposed pad should be connected to ground following the manufacturer package drawing.
Do not treat the 2.048 V onboard reference as permission to apply an arbitrary ±2.048 V differential signal. Confirm the common-mode voltage, absolute input limits, source impedance, and allowed input configuration for the operating supply. The approximately 3.75 SPS conversion rate is suitable for slow sensor signals but not for waveform capture, so check the signal bandwidth before adding input filtering or configuring the converter.
Follow the manufacturer recommended-decoupling network and place the supply capacitors close to the device's supply and ground connections. Provide the required I2C pull-up resistors at the bus level and verify their values against the bus voltage, capacitance, and operating speed. Keep the exposed-pad thermal and electrical connection free from accidental net conflicts, and use the manufacturer land pattern rather than a generic 8-pin DFN footprint.
Uyumluluk Bilgisi
The MCP3422A0-E/MC ordering variant is identified as automotive AEC-Q100 qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not confirmed by the available manufacturer and distributor information.