Microchip Technology

MCP6043-I/SN - 1.6V Low-Power R-R Op Amp | Microchip

MPN: MCP6043-I/SN ✓ Aktif
1.4 V Vdss Less than 1.0 uA per amplifier Id 8-lead SOIC Package
MOQ: 1 |

MCP6043-I/SN Genel Bakış

Microchip Technology MCP6043-I/SN is a single-amplifier rail-to-rail input and output operational amplifier operating from a low 1.4 V supply, with a 1.6 V minimum operating voltage identified for the device, less than 1.0 uA quiescent current, and an 8-lead SOIC package. It includes a chip-select function for controlled amplifier operation in low-power systems.

An operational amplifier is an analog signal-conditioning integrated circuit that uses high open-loop gain to amplify the difference between two input voltages. The MCP6043 belongs to the rail-to-rail input and output amplifier family, allowing signals close to the negative and positive supply rails to be processed. This makes it useful within the hierarchy of operational amplifier, analog amplifier, amplifier IC, and semiconductor.

The principal features are rail-to-rail input and output operation, operation as low as 1.4 V, a maximum quiescent current below 1.0 uA, and an approximately 10 kHz gain-bandwidth product. The low supply voltage and low quiescent current reduce energy consumption in continuously powered systems, while chip select provides a control mechanism for multi-amplifier or shared-signal-chain designs.

The MCP6043 uses CMOS operational-amplifier circuitry optimized for low-voltage, low-power signal conditioning. Rail-to-rail input stages increase the usable input range without requiring a negative supply, and rail-to-rail output stages provide improved output swing near the supply rails. Its 8-lead SOIC option supports conventional surface-mount assembly, while the wider MCP6043 family is also offered in PDIP and MSOP packages.

Typical applications include industrial process-control signals, portable instrumentation, battery-operated sensor interfaces, wearable products, and low-voltage analog measurement systems. The chip-select feature can be especially useful when the amplifier must be disabled to reduce system consumption or when several signal paths require coordinated activation.

Designers should account for the approximately 10 kHz gain-bandwidth product when setting closed-loop gain and signal bandwidth. Input and output stability, common-mode range, output swing, and decoupling requirements should be checked against the manufacturer datasheet for the selected supply voltage and load.

This page combines the manufacturer product characteristics with package, sourcing, replacement, and design guidance. It also distinguishes electrically interchangeable temperature-grade options from alternatives that require a different footprint, helping engineers evaluate PCB compatibility before committing to a replacement.

Drop-in alternatifler için MCP6043-I/SN — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

MCP6043-E/SN

✅ Yerleştirme
📦 SOIC-8
Same MCP6043 single-amplifier architecture and SOIC-8 footprint; temperature grade differs, with E/SN selected for an extended operating range while I/SN is the standard industrial grade.

📋 Katalogda Olmayan Referans Alternatifi

MCP6043-I/SN Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type Single operational amplifier
Number of Channels 1 channel
Rail-to-Rail Input Yes
Rail-to-Rail Output Yes
Minimum Operating Supply Voltage 1.4 V
Minimum Operating Voltage 1.6 V
Durağan Akım Less than 1.0 uA per amplifier
Gain-Bandwidth Product 10 kHz
Chip Select Yes
Paket 8-lead SOIC
Montaj Türü Surface mount
Family Package Options 8-lead PDIP, 8-lead SOIC, and 8-lead MSOP

MCP6043-I/SN 8-lead pdip, 8-lead soic, and 8-lead msop Pin Yapısı Kılavuzu

MCP6043-I/SN (8-lead pdip, 8-lead soic, and 8-lead msop paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

8-lead pdip, 8-lead soic, and 8-lead msop paket pin çizelgesi için MCP6043-I/SN

Ayrıntılı pin çıkış verisi mevcut değil: MCP6043-I/SN.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MCP6043-I/SN için uygundur 6 uygulamas: Battery-Powered Sensor Signal Conditioning, Industrial Process Control, Portable Medical Monitoring, Wearable Device Sensing, Low-Voltage Data Acquisition, Portable Instrumentation.

⚡

Battery-Powered Sensor Signal Conditioning

The MCP6043-I/SN fits battery-powered sensor interfaces because the MCP6043 family operates from a supply as low as 1.4 V and draws less than 1.0 uA quiescent current per amplifier. Place it between a low-voltage sensor and an ADC or comparator to amplify a small differential signal while keeping the input and output rail-to-rail. The approximately 10 kHz gain-bandwidth product suits slowly varying temperature, pressure, and electrochemical measurements, but the closed-loop bandwidth decreases as gain rises. Verify the common-mode range against the sensor output and use chip select when the amplifier is not needed continuously.

🏭

Industrial Process Control

The MCP6043-I/SN is appropriate for low-level process-control signals where low quiescent current and rail-to-rail operation are useful. It can condition a 4 mA-to-20 mA sensor interface, bridge-derived voltage, or divided transducer output before digitization. Operation from a supply as low as 1.4 V allows the amplifier to operate near the signal source, while the single SOIC-8 package simplifies board area. The approximately 10 kHz bandwidth is appropriate for process variables rather than high-speed waveform capture. Confirm input bias current, offset, noise, and output drive against the precision required by the measurement chain.

💊

Portable Medical Monitoring

The MCP6043-I/SN can serve as a low-power front-end amplifier in portable medical or wellness monitoring equipment where the source signal is low amplitude and the supply budget is limited. Rail-to-rail input and output operation helps preserve signal range in compact single-supply systems, and the less-than-1.0 uA quiescent current reduces continuous power consumption. The chip-select function supports duty-cycled acquisition paths. Its approximately 10 kHz gain-bandwidth product is suitable for pressure, pulse, or bioimpedance signals within the required measurement bandwidth, while medical-system designers must separately validate noise, accuracy, safety, and qualification requirements.

📱

Wearable Device Sensing

The MCP6043-I/SN is well matched to wearable sensing because it combines rail-to-rail operation, a low 1.4 V family operating voltage, less than 1.0 uA quiescent current, and chip select in a small SOIC-8 package. It can amplify accelerometer, optical, biochemical, or resistive sensor outputs before a low-power ADC samples them. Chip select allows the amplifier to remain disabled during idle periods, improving the energy budget of duty-cycled devices. Because the gain-bandwidth product is approximately 10 kHz, use moderate closed-loop gains for slow sensor signals and verify settling time before repeated conversions.

🖥️

Low-Voltage Data Acquisition

The MCP6043-I/SN can be used as the analog front end of a compact, low-voltage data-acquisition system. Its rail-to-rail input stage accepts signals near the supply limits, and the rail-to-rail output maximizes the available voltage swing into a following ADC or comparator. Operation down to 1.4 V supports energy-limited sources, while less-than-1.0 uA quiescent current is valuable when many acquisition channels are active. The approximately 10 kHz gain-bandwidth product favors temperature, pressure, and slow sensor channels rather than high-speed sampling. Confirm ADC input range, settling requirements, and the amplifier output capability for the selected source impedance.

🔧

Portable Instrumentation

The MCP6043-I/SN is suitable for portable instrumentation that measures small analog signals from a low-voltage sensor network. A single amplifier can provide gain, filtering, and impedance buffering around an instrumentation chain while keeping board area and supply consumption low. Rail-to-rail operation is valuable when the signal occupies much of the available input range, and chip select can isolate the channel during idle periods. The approximately 10 kHz gain-bandwidth product is suitable for slowly changing measurements but not demanding wideband diagnostics. Select the resistor values and capacitors around the amplifier for the intended gain and bandwidth, then confirm output swing under the expected load.

Önerilen Ürünler Özeti

MCP6043-I/SN Microchip Technology Kullanıldığı Yer: Battery-Powered Sensor Signal Conditioning, Industrial Process Control, Portable Medical Monitoring, Wearable Device Sensing, Low-Voltage Data Acquisition, Portable Instrumentation MCP6043-E/SN Same-family SOIC-8 alternative for an extended temperature grade Kullanıldığı Yer: Battery-Powered Sensor Signal Conditioning, Industrial Process Control, Portable Medical Monitoring, Wearable Device Sensing, Low-Voltage Data Acquisition, Portable Instrumentation
What is the MCP6043-I/SN?
The MCP6043-I/SN is a single, low-power CMOS operational amplifier from Microchip Technology with rail-to-rail input and output operation. According to the manufacturer product page, it includes chip select, operates from a supply as low as 1.4 V, and draws less than 1.0 uA quiescent current. The ordered MCP6043-I/SN configuration is supplied in an 8-lead SOIC package for surface-mount assembly.
What is the operating voltage of MCP6043-I/SN?
The MCP6043-I/SN supports low-voltage operation beginning at 1.4 V, while the product listing identifies a 1.6 V minimum operating voltage. These two statements describe the low-voltage envelope for the MCP6043 family, but the exact working range and absolute maximum ratings should be taken from the manufacturer datasheet. Confirm the selected supply level against the input common-mode and output-swing limits before finalizing the circuit.
What are the key specifications of MCP6043-I/SN that engineers should know?
The key MCP6043-I/SN characteristics are one amplifier channel, rail-to-rail input and output operation, a 1.4 V minimum family operating voltage, less than 1.0 uA quiescent current, and an approximately 10 kHz gain-bandwidth product. According to the Microchip product page, chip select is integrated for controlled operation. The MCP6043-I/SN package is the 8-lead SOIC option.
Where to download the MCP6043-I/SN datasheet PDF?
The MCP6043-I/SN datasheet and product resources are available from the official Microchip MCP6043 product page at https://www.microchip.com/en-us/product/MCP6043. Open the datasheet link on that page and select the document matching MCP6043. The device family also appears in PDIP, SOIC, and MSOP packages, so confirm that the electrical table and pinout correspond to the I/SN ordering code.
Where can I find the MCP6043-I/SN pinout?
The MCP6043-I/SN pinout is identified on the official Microchip product page for the 8-lead SOIC package. Use the pin-description table and package drawing in the linked manufacturer datasheet before assigning PCB nets. The visible part listing confirms an 8-SOIC package, while the exact numbered signal names are not reproduced on this page to avoid assigning connector or control functions incorrectly.
Is MCP6043-I/SN suitable for battery-operated applications?
The MCP6043-I/SN is suitable for battery-operated and other low-power analog applications because the MCP6043 family operates from a supply as low as 1.4 V and consumes less than 1.0 uA quiescent current per amplifier. According to the manufacturer product page, the device is intended for portable equipment and wearable products. The chip-select function can further support controlled, low-duty-cycle operation.
Can MCP6043-I/SN operate at 1.8 V or 3.3 V?
The MCP6043-I/SN can operate from a low-voltage supply beginning at 1.4 V, making 1.8 V and 3.3 V systems the relevant low-voltage use cases. Actual signal operation also depends on input common-mode range, output swing, gain, and load. Confirm those conditions in the manufacturer datasheet for the intended supply, especially when driving a sensor output near either supply rail.
What is the gain-bandwidth product of MCP6043-I/SN?
The MCP6043-I/SN has an approximately 10 kHz gain-bandwidth product according to the product listing. This bandwidth means it is intended primarily for precision and low-frequency signal conditioning rather than wideband waveform amplification. At a closed-loop gain of 10, the usable small-signal bandwidth will be materially lower than 10 kHz, so higher-gain and fast-signal designs require stability and bandwidth checks.
When should I choose MCP6043-I/SN over another low-power op amp?
Choose MCP6043-I/SN when the design needs one rail-to-rail input and output amplifier, operation from a supply as low as 1.4 V, less than 1.0 uA quiescent current, and integrated chip select in an 8-lead SOIC footprint. It is particularly appropriate for portable sensors and industrial process-control signals. Choose a different amplifier if the application requires greater bandwidth, output current, precision, or multi-channel integration.
MCP6043-I/SN vs MCP6043-E/SN - which is better?
MCP6043-I/SN and MCP6043-E/SN use the same MCP6043 amplifier architecture and 8-lead SOIC package, but their ordering codes denote different temperature grades. The I-grade version is generally selected for the standard industrial temperature range, while the E-grade version targets an extended range. Compare the manufacturer temperature tables and product qualification requirements before selecting between them.
What is the best drop-in replacement for MCP6043-I/SN?
MCP6043-E/SN is the directly comparable 8-lead SOIC replacement identified in the manufacturer-family comparison results for MCP6043-I/SN. It retains the same MCP6043 amplifier configuration and footprint, with the principal selection difference being the ordering-code temperature grade. Confirm supply range, chip-select behavior, pin names, and temperature requirements in the manufacturer datasheet before approving the substitution.
Can MCP6043T-I/SN replace MCP6043-I/SN?
MCP6043T-I/SN is associated with the same MCP6043-I/SN electrical device in an 8-SOIC package, but the T ordering code identifies a different manufacturing or shipping configuration. It should therefore be treated as an orderable configuration rather than a distinct functional upgrade. Confirm reel format, quantity, lot traceability, and the manufacturer ordering information before using it as a direct purchasing replacement.
Is MCP6043-I/SN the same as MCP6043-I/MS?
No, MCP6043-I/MS is not a footprint-compatible replacement for MCP6043-I/SN because the MS designation identifies an 8-lead MSOP package, while MCP6043-I/SN uses an 8-lead SOIC package. Both belong to the low-power MCP6043 family, but the lead spacing and land pattern differ. A board designed for SOIC cannot directly accept the MSOP package.
What is the best Microchip equivalent for MCP6043-I/SN?
MCP6043-E/SN is the closest same-package Microchip alternative found for MCP6043-I/SN because both are 8-lead SOIC versions of the single-amplifier MCP6043 family with chip select. The main engineering distinction is the temperature grade associated with the suffix. Verify operating-temperature limits and production requirements against the manufacturer datasheet before treating it as a drop-in replacement.
Where to buy MCP6043-I/SN online?
Use the Request a Quote form on this page to request MCP6043-I/SN availability, current lead time, and order handling. The manufacturer confirms that the MCP6043 family is offered in 8-lead SOIC, PDIP, and MSOP packages, while distributor search results identify MCP6043-I/SN as an 8-SOIC standard amplifier. Submit the exact suffix I/SN with your request to avoid package or grade mismatches.
What is the price and lead time for MCP6043-I/SN?
Current MCP6043-I/SN pricing, stock, and lead time should be requested through the Request a Quote form on this page. The exact I/SN ordering code identifies the industrial-grade 8-lead SOIC configuration, and availability can vary with order quantity and production packaging. Include your target quantity, ship-to region, and required date so the quote can reflect the correct manufacturing configuration.

Mühendislik referans verileri: MCP6043-I/SN — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose MCP6043-I/SN for low-voltage, low-power analog designs that require one rail-to-rail amplifier with chip select, particularly when the system operates near 1.4 V to 3.3 V and the signal bandwidth is modest. The approximately 10 kHz gain-bandwidth product makes it more appropriate for sensor and process-control signals than for high-speed waveform or communications amplification. Choose MCP6043-E/SN when the board requires the extended temperature grade while retaining the same MCP6043 architecture and SOIC-8 footprint. Verify temperature limits, chip-select logic, input bias, offset, common-mode range, and output swing in the manufacturer datasheet. Do not substitute MCP6043-I/MS for the SOIC-8 target because the MSOP land pattern is different and would require a PCB redesign.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MCP6043-E/SN
Brand Microchip Technology Microchip Technology
Package SOIC-8 SOIC-8 - same package
Amplifier Channels 1 channel 1 channel
Minimum Family Operating Voltage 1.4 V 1.4 V
Quiescent Current Less than 1.0 uA per amplifier Less than 1.0 uA per amplifier
Gain-Bandwidth Product 10 kHz 10 kHz
Input Common-Mode Range Rail-to-rail input Rail-to-rail input
Output Swing Rail-to-rail output Rail-to-rail output
Chip Select Yes Yes
Temperature Grade I grade E grade

Ana Farklılayıcılar

  • Combines rail-to-rail operation with sub-microamp quiescent current (karşılaştırma:MCP6043-E/SN)
  • Integrated chip select supports controlled low-power operation (karşılaştırma:MCP6043-E/SN)
  • Operates in the same 8-lead SOIC footprint (karşılaştırma:MCP6043-E/SN)

Tasarım Notları

The MCP6043-I/SN consumes less than 1.0 uA quiescent current per amplifier and can operate from a supply as low as 1.4 V. Use chip select when the amplifier is not required continuously, but include enough pull resistance and logic-level compatibility to keep the control pin in a defined state. Verify the supply range for every voltage-sensitive downstream node rather than assuming that the 1.4 V family capability applies to the entire board.

The approximately 10 kHz gain-bandwidth product limits the useful closed-loop bandwidth as gain increases. Use the manufacturer stability and bandwidth information to select feedback resistors and compensation values, and avoid using the device as a general-purpose high-speed amplifier. When driving an ADC, compare the required settling time with the closed-loop bandwidth and acquisition interval to prevent acquisition error.

Place the amplifier, feedback components, and decoupling capacitor close to the associated SOIC-8 pins. Keep the chip-select route away from sensitive high-impedance input nodes to reduce capacitive coupling. Follow the manufacturer pin-description table and package drawing during layout, particularly for ground, supply, chip-select, input, and output connections.

Rail-to-rail input and output does not mean the output can reach either supply rail exactly under every load. Check the output-swing graph, load current, temperature, and supply voltage in the manufacturer datasheet. Also verify that the source impedance is compatible with the amplifier's bias-current and noise requirements; otherwise, the practical input offset can be significantly larger than the device's specified offset.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The manufacturer product page identifies industrial, portable-equipment, wearable, and low-power applications but does not state the requested compliance declarations. The I/SN suffix denotes the industrial temperature grade rather than AEC-Q100 qualification.

Veri doğrulanma tarihi: 2026-11-15 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

mcp604 datasheet MCP6043-I/SN datasheet MCP6043-I/SN datasheet pdf MCP6043-I/SN pinout MCP6043-I/SN equivalent MCP6043-I/SN replacement MCP6043-I/SN cross reference MCP6043-I/SN vs MCP6043-E/SN MCP6043-I/SN SOIC-8 Microchip MCP6043-I/SN MCP6043-I/SN price MCP6043-I/SN stock MCP6043-I/SN 1.4V op amp MCP6043-I/SN battery powered sensor

İlgili Bileşenler ve Terimler

Microchip Technology MCP6043 MCP6043-I/SN MCP6043-E/SN MCP6043T-I/SN MCP6043-I/MS operational amplifier op amp analog amplifier amplifier IC semiconductor rail-to-rail input rail-to-rail output chip select quiescent current gain-bandwidth product SOIC-8 MSOP-8 PDIP-8 surface mount industrial process control battery-operated devices wearable products portable equipment signal conditioning
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle