MCP6072-E/SN - Dual 1.8V R-R Op Amp | Microchip
MPN: MCP6072-E/SN ✓ AktifMCP6072-E/SN Genel Bakış
An operational amplifier is an analog signal-processing IC that amplifies the voltage difference between its two inputs. The MCP6072 belongs to the precision-amplifier hierarchy within the broader amplifier-IC and semiconductor categories. Rail-to-rail input capability lets the input common-mode voltage approach the supply rails, while rail-to-rail output capability allows the output voltage to swing close to either supply limit. This flexibility is valuable in low-voltage sensor, instrumentation, and mixed-signal systems where signal ranges occupy much of the available supply voltage.
The MCP6072 combines unity-gain stability, low offset voltage, low quiescent current, and a 1.2 MHz typical gain-bandwidth product. Unity-gain stability supports direct use as a voltage follower without external compensation. The maximum offset specification of ±150 µV is particularly useful for sensor interfaces and battery-powered measurement circuits where input bias and offset errors can dominate the accuracy of the signal chain. Low quiescent current also supports portable and energy-conscious instrumentation.
The dual configuration provides two amplifiers in one package, reducing board area when a design requires two gain stages, buffers, or differential signal-conditioning channels. Rail-to-rail input and output behavior makes the device suitable for low-voltage ADC front ends, current-sense amplifiers, sensor conditioners, and general-purpose signal buffering. The 8-pin SOIC footprint is also broadly compatible with conventional through-hole assembly and conventional PCB land patterns.
Typical applications include precision sensor conditioning, low-voltage ADC signal conditioning, current measurement, portable instrumentation, and general-purpose dual-buffer designs. In a current-sense application, the amplifier can amplify the small voltage across a sense resistor while its rail-to-rail input stage accommodates low-side sensing close to ground. For battery-powered equipment, the 110 µA typical quiescent current per amplifier helps limit standing current when the signal path is not actively processing a changing signal.
Designers should confirm the required output swing, input common-mode range, capacitive-load stability, and bandwidth at the intended closed-loop gain. The unity-gain-stable architecture is important when the MCP6072 is configured as a follower or low-gain buffer. Input and output decoupling should be placed close to the relevant device pins, while source and return paths should be arranged to minimize parasitic resistance and added offset error.
This page combines manufacturer specifications, verified distributor availability information, package and ordering details, practical application guidance, and a parameter comparison with documented same-brand alternatives. It is structured to support direct sourcing, engineering selection, PCB implementation, and drop-in replacement assessment for the MCP6072-E/SN.
Drop-in alternatifler için MCP6072-E/SN — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller MCP6072-E/SN (aynı form faktörü ve ayağa oturma) — farklı olan Number of Channels, Operating Temperature Range, Package, RoHS Status, Amplifier Type.
MCP6002T-E/SNVAO
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MCP6002T-I/SNVAO
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MCP6004-E/SLVAO
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MCP6032-E/SN
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MCP6072-E/SN Maksimum Değerlendirmeler & Elektriksel Özellikler
| Amplifier Count | 2 amplifiers |
| Product Type | Precision operational amplifier |
| Minimum Single-Supply Voltage | 1.8 V |
| Maximum Input Offset Voltage | ±150 µV |
| Gain-Bandwidth Product | 1.2 MHz typical |
| Durağan Akım | 110 µA typical per amplifier |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Gain Stability | Unity-gain stable |
| İşletim Sıcaklığı Aralığı | -40°C to +125°C |
| Paket | 8-pin SOIC |
| Lead Count | 8 pins |
| Packing Media | Tube |
| Tube Quantity | 100 units |
| Country of Origin | Thailand |
MCP6072-E/SN 8-pin soic Pin Yapısı Kılavuzu
MCP6072-E/SN (8-pin soic paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: MCP6072-E/SN.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MCP6072-E/SN için uygundur 6 uygulamas: Low-Voltage ADC Signal Conditioning, Portable Sensor Conditioning, Low-Side Current Sensing, Battery-Powered Instrumentation, Precision Voltage Buffer, Industrial Process Measurement.
Low-Voltage ADC Signal Conditioning
The MCP6072-E/SN fits low-voltage ADC front ends because its rail-to-rail input stage accepts signals close to either supply rail, while rail-to-rail output capability gives the ADC driver useful headroom. The device operates from a single supply as low as 1.8 V and has a 1.2 MHz typical gain-bandwidth product for low- to moderate-bandwidth amplification. Its ±150 µV maximum input offset is important when the amplified signal occupies a small portion of the converter range. Unity-gain stability also permits direct buffering. Care should be taken to keep the ADC input within its voltage range and to maintain stable operation with the selected feedback network.
Önerilen
Portable Sensor Conditioning
The MCP6072-E/SN is suitable for portable sensor interfaces because it combines a 1.8 V minimum supply requirement with 110 µA typical quiescent current per amplifier. Rail-to-rail inputs help preserve signal range when the sensor output moves near a supply rail, and the ±150 µV maximum offset helps control DC measurement error. The dual amplifier arrangement can condition one sensor channel and buffer a reference or provide a second gain stage. The 1.2 MHz typical gain-bandwidth product is adequate for many pressure, temperature, and position sensors. Board-level planning should still include sensor noise, excitation stability, and the ADC acquisition time.
Önerilen
Low-Side Current Sensing
The MCP6072-E/SN can amplify the small differential voltage produced by a low-side current-sense resistor while operating from a low-voltage rail. Rail-to-rail input operation is useful when the sense-resistor voltage approaches ground, and the rail-to-rail output allows a closer fit to an ADC’s input range. The dual configuration can provide a second amplifier for gain, offset, or filtering. The 1.2 MHz typical gain-bandwidth product supports bandwidths appropriate for many current-control and monitoring loops. Layout remains critical: route the Kelvin sense connections directly to the amplifier and keep the shunt and amplifier return path free from high-current voltage drops.
Önerilen
Battery-Powered Instrumentation
The MCP6072-E/SN fits battery-powered instrumentation where operating current and usable signal range are important. It starts from a single 1.8 V supply and consumes 110 µA typical quiescent current per amplifier, while its rail-to-rail input and output behavior allows more of the available voltage span to carry useful information. The ±150 µV maximum offset can improve accuracy in low-level sensor channels, and unity-gain stability supports buffering. The dual SOIC-8 package reduces component count when two measurement channels are required. Power-system design should account for battery variation, regulator headroom, and the amplifier’s behavior over the complete -40°C to +125°C temperature range.
Önerilen
Precision Voltage Buffer
The MCP6072-E/SN can serve as a precision voltage buffer because it is unity-gain stable and provides rail-to-rail input and output operation. In a follower configuration, the output closely follows the input while the amplifier isolates the source from downstream loading. The ±150 µV maximum input offset voltage defines the principal DC error, and the 1.2 MHz typical gain-bandwidth product limits the useful bandwidth in follow mode. Two amplifiers in one 8-pin SOIC can buffer two related nodes or create a buffered reference distribution. Validate source impedance, capacitive loading, and settling time before using it with long cable runs or unusually slow feedback networks.
Önerilen
Industrial Process Measurement
The MCP6072-E/SN is applicable to industrial process measurement when the system operates from a low-voltage rail and needs two analog channels in a compact SOIC package. Rail-to-rail inputs accommodate sensor signals spanning most of the supply range, while the ±150 µV maximum offset reduces input-referred DC error. The -40°C to +125°C operating range supports extended-temperature equipment designs, and the dual configuration can handle two inputs or provide gain and filtering stages for one channel. The 1.2 MHz typical gain-bandwidth product is suitable for many industrial process signals rather than high-speed instrumentation. Protection, isolation, surge filtering, and grounding must be designed around the actual sensor environment.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MCP6072-E/SN — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | MCP6002T-E/SNVAO | MCP6002T-I/SNVAO | MCP6004-E/SLVAO | MCP6032-E/SN |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
Ana Farklılayıcılar
- Documented low-voltage rail-to-rail operation (karşılaştırma:MCP6032-E/SN)
- Precision offset specification (karşılaştırma:MCP6002T-E/SNVAO)
- Unity-gain-stable dual configuration (karşılaştırma:MCP6004-E/SLVAO)
Tasarım Notları
Route the two inputs of each amplifier as a closely coupled differential pair to minimize pickup of switching-node or high-current return-path noise. For low-side current sensing, use Kelvin connections directly to the shunt terminals so the sense voltage is not corrupted by copper drops. Keep the MCP6072-E/SN ground reference short and connect it to the quiet analog return rather than routing it through the load-current path.
Place the supply bypass capacitor close to the amplifier supply pins and provide a short, low-impedance ground return. Although the MCP6072-E/SN operates from 1.8 V and is designed for low-voltage systems, bypassing impedance still affects output stability and transient response. Validate the power rail at the device under worst-case load because long supply traces and a resistive source impedance can create interaction between the two amplifier channels.
Do not assume that rail-to-rail input and output descriptions eliminate all headroom restrictions. Verify the manufacturer’s input common-mode and output-swing limits over the intended supply range, especially near 1.8 V. Also account for the ±150 µV maximum input offset when calculating DC accuracy. For follower operation, unity-gain stability supports the configuration, but the feedback network and output loading still need to be checked.
The 1.2 MHz typical gain-bandwidth product limits closed-loop bandwidth according to the selected noise gain. Avoid selecting a feedback value that demands high closed-loop gain without checking phase margin, settling time, and output-swing requirements. When driving an ADC, use an isolation resistor close to the amplifier output when the converter’s sampling kickback could otherwise create stability problems.
Uyumluluk Bilgisi
The manufacturer product page and ordering listing identify the device, package, temperature range, packing media, and country of origin but do not state the requested compliance conclusions. Use the manufacturer’s current material declaration or product documentation for formal compliance decisions.