MPC8536EAVTATHA557 - PowerQUICC III 1.25GHz e500 MPU | NXP
MPN: MPC8536EAVTATHA557 ✓ AktifMPC8536EAVTATHA557 Genel Bakış
Key features include a 1.25 GHz e500 core with dual-issue superscalar execution, integrated security engine supporting DES, 3DES, AES, and public-key acceleration, hardware packet processing acceleration for IPsec and SSL/TLS, and four 10/100/1000 Mbps Enhanced Three-Speed Ethernet (eTSEC) controllers. The device operates from a 1.0 V core supply with I/O voltages of 1.5 V, 1.8 V, 2.5 V, and 3.3 V.
Typical applications include industrial routers and switches, network-attached storage (NAS), secure VPN gateways, factory automation controllers, and telecom line cards. The integrated security engine and multiple Ethernet ports make the MPC8536E particularly well-suited for secure networking and packet processing workloads.
When designing with this device, allocate a minimum 8-layer PCB stack-up to route the 783-ball FCPBGA package, provide at least one square inch of unbroken ground plane beneath the die, and follow NXP application note AN3664 for DDR3 trace impedance matching. The device is rated for -40C to +105C operation (industrial grade) and requires external clock generation.
Drop-in alternatifler için MPC8536EAVTATHA557 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller MPC8536EAVTATHA557 (aynı form faktörü ve ayağa oturma) — farklı olan Core Architecture, I/O Voltage, Memory Controller, Mounting Type, Operating Temperature.
MPC8536EAVTATHA
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MPC8535EAVTALF
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
MPC8544EAVTALF
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
MPC8548EVTATLB
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
MPC8572ELVTAVNB
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
MPC8640DTHX1250HE
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
MPC8536EAVTATHA557 Özellikler
| Processor Type | PowerPC e500 Microprocessor IC MPC85xx |
| Core Architecture | PowerPC e500 (32-bit, dual-issue superscalar) |
| Core Frequency | 1.25 GHz |
| Number of Cores | 1 |
| Operating Voltage (Core) | 1.0 V |
| I/O Voltage | 1.5 V / 1.8 V / 2.5 V / 3.3 V |
| Paket | 783-FCPBGA (29x29 mm) |
| Montaj Türü | Surface Mount |
| İşletim Sıcaklığı | -40C to +105C |
| Ethernet Controllers | 4 x 10/100/1000 Mbps eTSEC |
| Security Engine | DES / 3DES / AES / Public-key acceleration |
| Memory Controller | DDR2 / DDR3 with ECC support |
| PCI Express Lanes | PCIe Gen 2 x4 |
| RoHS Durumu | Compliant |
| JTAG Support | JTAG / COP / BDI debug interface |
| L1 Cache | 32 KB instruction + 32 KB data |
MPC8536EAVTATHA557 783-fcpbga (29x29 mm) Pin Yapısı Kılavuzu
MPC8536EAVTATHA557 (783-fcpbga (29x29 mm) paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: MPC8536EAVTATHA557.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MPC8536EAVTATHA557 için uygundur 6 uygulamas: Industrial VPN Gateway, Network-Attached Storage (NAS) Controller, Telecom Line Card, Factory Automation Controller, Network Security Appliance, Smart Grid Communications Gateway.
Industrial VPN Gateway
The MPC8536EAVTATHA557 fits industrial VPN gateway designs thanks to its hardware IPsec/SSL acceleration and four integrated Gigabit Ethernet controllers. Hardware offload of AES-128/256 and 3DES off the e500 core sustains up to 1 Gbps encrypted throughput while leaving CPU cycles for routing and policy enforcement. The 783-FCPBGA package, while PCB-intensive, allows all four Ethernet PHYs to be placed beneath the BGA in a compact footprint. Industrial temperature rating (-40C to +105C) supports factory-floor deployment.
Önerilen
Network-Attached Storage (NAS) Controller
The MPC8536EAVTATHA557 is well-suited for NAS controller boards serving SOHO/small-business markets, where its 1.25 GHz e500 core delivers enough CPU performance for file-system metadata, RAID-5 parity calculations, and SMB/NFS protocol handling. The DDR3 memory controller with ECC protects against soft errors during long file transfers. Designers typically pair the device with discrete SATA controllers via the PCI Express x4 link. The integrated security engine accelerates Kerberos and SMB3 encryption transparently.
Önerilen
Telecom Line Card
In telecom line cards, the MPC8536EAVTATHA557 doubles as a control-plane processor and a packet-classification engine. The four eTSEC ports aggregate upstream traffic at line rate, while the hardware packet-processing engine accelerates ACL matching and QoS tagging. Hardware CRC computation offloads the main CPU, freeing the e500 core to run routing-protocol stacks like OSPFv3 or IS-IS. The industrial temperature range and 1.25 GHz performance level are typical for mid-range access line cards.
Önerilen
Factory Automation Controller
The MPC8536EAVTATHA557 fits PLC-class industrial controllers where deterministic Ethernet (EtherCAT, PROFINET RT) and machine-protocol handling must run on a single processor. The e500 core's deterministic interrupt latency, combined with the four Gigabit Ethernet controllers, supports multi-protocol bridging between EtherCAT slaves, PROFINET RT nodes, and the IT network. The extended -40C to +105C operating range tolerates factory ambient without active cooling, and the security engine authenticates firmware updates to IEC 62443 conformity.
Önerilen
Network Security Appliance
For SMB firewall/UTM appliances, the MPC8536EAVTATHA557 delivers balanced CPU performance and security throughput. The integrated AES/3DES engine allows 1 Gbps IPsec VPN termination while the e500 core runs stateful firewall logic, DPI classification, and intrusion detection signatures. The four Ethernet controllers support DMZ, WAN, LAN, and management ports without external switch silicon. Compared with ASIC-only solutions, the MPU design allows firmware-level signature updates without silicon respins.
Önerilen
Smart Grid Communications Gateway
The MPC8536EAVTATHA557 targets smart-grid gateways that aggregate data from PMUs, smart meters, and DNP3/IEC 61850 substations. The hardware packet engine accelerates IEC 61850 GOOSE message processing, while the security engine enforces TLS mutual authentication with grid-control SCADA servers. The four-port Gigabit Ethernet controller provides dedicated lanes for the WAN uplink, LAN device side, redundancy link, and isolated commissioning port. Operating from -40C to +105C and integrating hardware security, the part meets substation reliability requirements.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MPC8536EAVTATHA557 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | MPC8536EAVTATHA | MPC8535EAVTALF | MPC8544EAVTALF | MPC8548EVTATLB |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCPBGA (29x29) | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same |
| Core | e500 1.25 GHz | e500 1.25 GHz - same | e500 1.0 GHz | e500 1.0 GHz | e500 1.33 GHz |
| Cores | 1 | 1 | 1 | 1 | 1 |
| Ethernet Controllers | 4 x 1G eTSEC | 4 x 1G eTSEC | 4 x 1G eTSEC | 4 x 1G eTSEC | 4 x 1G eTSEC |
| Security Engine | AES/3DES/RSA + IPsec accel | AES/3DES/RSA + IPsec accel | AES/3DES/RSA + IPsec accel | Software / no inline IPsec | AES/3DES/RSA + IPsec accel |
| Memory Controller | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC |
| PCI Express | Gen 2 x4 | Gen 2 x4 | Gen 2 x4 | Gen 2 x4 | Gen 2 x4 |
| Industrial Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
Ana Farklılayıcılar
- Integrated hardware security engine (karşılaştırma:MPC8544EAVTALF)
- Same-package speed upgrade available (karşılaştırma:MPC8536EAVTATHA (without -557))
- Higher core frequency than same-package siblings (karşılaştırma:MPC8535EAVTALF)
Tasarım Notları
The 1.0 V core at 1.25 GHz dissipates approximately 9-12 W under full load (estimated from die size 65 nm process, 0.85 V V_core internal). Use a heat spreader with at least 1.5 square inches of continuous copper beneath the package. Without forced airflow the 105C ambient ceiling is reached at 70-80% load; design with at least 200 LFM airflow for industrial deployments above 75C ambient. Junction temperature should be monitored via the on-chip thermal sensor.
A minimum 8-layer PCB stack-up is required for the 783-ball FCPBGA at 1.0 mm pitch. Use NXP's reference design footprint and follow application note AN3653 for via-in-pad escape and microvia recommendations. Provide at least 50 ohm controlled impedance for DDR3 traces and match trace lengths within 50 mils across the byte lanes. Maintain a continuous GND reference plane underneath the BGA to control return current.
Use a 3-channel PMIC for V_CORE (1.0 V), V_DDR (1.5/1.8 V), and V_IO (3.3 V) supplies. Bulk capacitance of at least 220 uF near each rail plus 100 nF ceramic bypass on every power ball is recommended. Sequence V_CORE before V_DDR and V_IO during ramp-up to avoid ESD latch-up. Verify ramp rates of 1.0 V/ms match the MPC8536E Hardware Specifications document.
Uyumluluk Bilgisi
RoHS/REACH compliant per NXP product page. Not AEC-Q100 qualified; select MPC8536E automotive variants for vehicle designs.
