MSP430F5308IPT - 25MHz Mixed-Signal MCU | Texas Instruments
MPN: MSP430F5308IPT ✓ AktifMSP430F5308IPT Genel Bakış
An ultra-low-power mixed-signal microcontroller is a semiconductor device that combines a low-power digital controller with analog measurement functions such as an ADC and comparator. The MSP430 architecture belongs to the microcontroller hierarchy and emphasizes efficient operation in instrument, industrial, and battery-powered systems. Its 16-bit registers and constant generators support efficient control code, while integrated peripherals reduce the need for external components.
Key features include a 25 MHz operating speed, 16 KB of program Flash, 6 KB of SRAM, and a 10-bit ADC. The device also provides a comparator, DMA, UART, SPI, I2C, and a hardware multiplier. These resources make the MSP430F5308IPT suitable for mixed-signal sensing, data acquisition, communication, and embedded control applications where board area and power efficiency are important.
The MSP430 CPUXV2 core uses a 16-bit RISC architecture. Hardware peripherals can move or exchange data without requiring continuous CPU intervention, while the hardware multiplier accelerates multiplication-intensive control and signal-processing calculations. Serial connectivity through UART, SPI, and I2C supports attachment to sensors, transceivers, memory devices, and industrial peripherals.
Typical applications include low-power industrial instrumentation, connected sensor nodes, compact data-acquisition systems, actuator controllers, and communication equipment. The 48-LQFP package provides a conventional surface-mount option with exposed leads for PCB assembly. The integrated 10-bit ADC supports analog monitoring, while the comparator is useful for threshold detection and signal conditioning.
When designing around the MSP430F5308IPT, verify the 3 V operating supply, analog input limits, ADC reference arrangement, and the pin multiplexing required by each UART, SPI, I2C, timer, and GPIO function. Use the manufacturer pin-description table when assigning tracks and keep analog and communication routing separated from noisy switching nodes where practical.
This page combines the Texas Instruments product specifications, package information, sourcing guidance, and application-oriented engineering notes to help engineers evaluate the MSP430F5308IPT for low-power mixed-signal control designs.
Drop-in alternatifler için MSP430F5308IPT — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
MSP430F5308IZQE
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MSP430F5308IPT Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | 16-bit ultra-low-power mixed-signal microcontroller |
| Core Processor | MSP430 CPUXV2 |
| Architecture | 16-bit RISC |
| Maximum Clock Speed | 25 MHz |
| Flash Memory | 16 KB |
| Flash Organization | 16K x 8 bits |
| SRAM | 6 KB |
| ADC Resolution | 10 bits |
| Analog Comparator | Integrated |
| DMA | Integrated |
| Serial Interfaces | UART, SPI, and I2C |
| Hardware Multiplier | Integrated |
| Nominal Supply Voltage | 3 V |
| Paket | 48-LQFP (PT), 7 x 7 mm |
| Pin Sayısı | 48 pins |
| Montaj Türü | Surface mount |
MSP430F5308IPT 48-lqfp (pt), 7 x 7 mm Pin Yapısı Kılavuzu
MSP430F5308IPT (48-lqfp (pt), 7 x 7 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: MSP430F5308IPT.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MSP430F5308IPT için uygundur 6 uygulamas: Low-Power Sensor Node, Industrial Data-Acquisition Controller, Communication Controller, Battery-Powered Condition Monitor, Actuator and Motor-Control Interface, Compact Measurement Instrument.
Low-Power Sensor Node
The MSP430F5308IPT fits a low-power sensor node because it combines a 25 MHz 16-bit CPU, 16 KB Flash, 6 KB SRAM, and a 10-bit ADC in one 48-LQFP device. The ADC can acquire analog sensor data while UART, SPI, or I2C connects the node to a local sensor, display, or communications peripheral. Its ultra-low-power MCU architecture supports duty-cycled measurements and long sleep intervals, although final energy consumption depends on the selected clock mode, sampling rate, and peripheral activity.
Önerilen
Industrial Data-Acquisition Controller
The MSP430F5308IPT is suitable for compact industrial data-acquisition logic that must combine analog measurement with serial communications. Its 10-bit ADC, comparator, DMA, and hardware multiplier support sampled acquisition, threshold detection, and efficient data handling, while 16 KB Flash and 6 KB SRAM provide dedicated program and working memory. At 25 MHz, the MCU can service control logic as well as UART, SPI, or I2C traffic without requiring a separate host processor.
Önerilen
Communication Controller
The MSP430F5308IPT can act as the protocol and supervisory controller in a connected embedded module. Integrated UART, SPI, and I2C interfaces allow the MCU to communicate with radio, transceiver, memory, and sensor components, while DMA supports efficient peripheral data movement. Its 25 MHz MSP430 CPUXV2 core and 6 KB SRAM are sufficient for moderate protocol stacks and control tasks, but developers should reserve flash space for firmware updates and confirm peripheral pin multiplexing.
Önerilen
Battery-Powered Condition Monitor
The MSP430F5308IPT is appropriate for battery-powered condition monitoring where analog sensing and low-power operation must coexist in a compact package. The comparator can establish a threshold for a monitored signal, the 10-bit ADC can quantify it, and DMA can transfer results without excessive CPU involvement. UART or I2C can report status to a host. The MSP430 family's low-power modes make the device relevant to remote monitoring, provided the final design calculates average current from the selected duty cycle.
Önerilen
Actuator and Motor-Control Interface
The MSP430F5308IPT can supervise compact actuator or motor-control systems where deterministic embedded control, digital communications, and limited analog monitoring are required. Timers and GPIO support actuator sequencing, while the comparator and ADC can monitor feedback or supply conditions. UART and SPI provide links to a higher-level controller or gate driver. Firmware must include appropriate output interlocking, fault handling, and timing margins because the general-purpose MCU does not remove the need for external power-stage protection.
Önerilen
Compact Measurement Instrument
The MSP430F5308IPT is well matched to a compact measurement instrument that needs local acquisition, control, and communications without a separate display processor. Its 16 KB Flash holds the application firmware, 6 KB SRAM supports working data, and the 10-bit ADC with comparator supports front-panel sensing or threshold functions. UART and I2C can connect a display or configuration interface. For higher measurement accuracy, an external precision converter such as ADS1262IPW may be appropriate.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MSP430F5308IPT — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | MSP430F5308IZQE |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 48-LQFP (PT), 7 x 7 mm | 48-LQFP, 7 x 7 mm |
| Core Processor | MSP430 CPUXV2 | MSP430 CPUXV2 |
| Maximum Clock Speed | 25 MHz | 25 MHz |
| Flash Memory | 16 KB | 16 KB |
| SRAM | 6 KB | 6 KB |
| ADC Resolution | 10 bits | 10 bits |
| Serial Interfaces | UART, SPI, and I2C | UART, SPI, and I2C |
| Additional Peripherals | Comparator, DMA, and hardware multiplier | Comparator, DMA, and hardware multiplier |
Ana Farklılayıcılar
- Closest family-level drop-in candidate (karşılaştırma:MSP430F5308IZQE)
- Integrated mixed-signal and communications resources (karşılaştırma:MSP430F5308IZQE)
- Compact 48-LQFP integration (karşılaştırma:MSP430F5308IZQE)
Tasarım Notları
Design the 3 V supply path around the MCU's operating requirements and the current demanded by the selected peripherals. Place the primary supply capacitor close to the package power pins and maintain short, low-impedance connections to the ground reference. Separate sensitive analog inputs from digital switching traces, and use the manufacturer recommended decoupling network without adding excessive capacitance that could impair power sequencing.
Assign analog, debug, communications, and general-purpose GPIO functions from the manufacturer pin table before routing the PCB. UART, SPI, I2C, ADC inputs, and GPIO can be multiplexed, so a mechanically valid LQFP placement does not guarantee a valid signal assignment. Keep analog traces short, provide a quiet ground path where possible, and route high-speed or switching signals away from ADC inputs to reduce conversion errors.
Do not substitute a family member solely because its flash and SRAM sizes match. Confirm the package pin assignment, temperature grade, operating limits, ADC characteristics, peripheral availability, and startup behavior. Also review each peripheral's alternate-function setting because two MCU functions can be routed to the same physical pin. Firmware should test unused or repurposed pins as inputs with suitable states during initialization.
Uyumluluk Bilgisi
The available Texas Instruments product and distributor records do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for MSP430F5308IPT. Confirm these attributes in formal manufacturer documentation before regulatory qualification.