Texas Instruments

MSP430FW425IPM - 16-Bit 8MHz Flow-Meter MCU | Texas Instruments

MPN: MSP430FW425IPM ✓ Aktif
64-LQFP (10 mm x 10 mm) Package 8 MHz Speed 16 KB Memory
MOQ: 1 |

MSP430FW425IPM Genel Bakış

The Texas Instruments MSP430FW425IPM is a 16-bit mixed-signal microcontroller optimized for electronic flow meters, with an 8 MHz CPU, 16 KB of flash memory, 512 bytes of SRAM, a rotary-sensing scan interface, and a 64-LQFP package measuring 10 mm by 10 mm. It combines embedded control, metering-oriented sensing, and low-power operation in a surface-mount industrial device.

A mixed-signal microcontroller is a semiconductor that combines a digital processor with analog and timing peripherals on one integrated circuit. In the product hierarchy, the MSP430FW425IPM belongs to the MSP430 family of 16-bit RISC microcontrollers, placing it between general-purpose embedded controllers and dedicated metering processors. Its scan interface helps acquire position or rotation-related data for flow-meter mechanisms while the CPU handles measurement control, calibration, calculations, and communications.

The principal device characteristics include a maximum listed CPU frequency of 8 MHz, 16 KB of flash memory for firmware, and 512 bytes of SRAM for working data. The 64-pin LQFP package provides a practical industrial footprint with enough peripheral connections for sensor inputs, control signals, debug access, and power management. The part is identified specifically for flow-meter applications rather than being a general-purpose performance processor.

Its architecture centers on a 16-bit MSP430 CPU optimized for embedded control and low-power operation. Flash memory retains the application firmware across power loss, while SRAM supports runtime variables and measurement processing. The scan interface is the defining functional addition for rotary-sensing applications, reducing the need for separate sensing circuitry when the measured mechanism can be scanned by the MCU.

Typical uses include compact ultrasonic flow meters, electromagnetic flow-meter controllers, positive-displacement meter electronics, water and gas metering equipment, and industrial totalizers. The device is especially relevant when a meter requires local signal acquisition, low-power embedded processing, and compact PCB integration without the overhead of a larger application processor.

Designers should assign the scan and sensing signals according to the manufacturer pin description table and reserve the exposed resources required for the meter's sensor type. Firmware should include calibration, signal validation, flow-direction handling, and fault detection because metering accuracy depends on both analog timing and the quality of the computed result.

This page consolidates the device identity, memory configuration, package information, metering features, sourcing workflow, application guidance, and verified same-family replacement options into one engineering reference. It also distinguishes true drop-in package alternatives from merely similar MSP430 products so procurement and design decisions can be evaluated together.

Drop-in alternatifler için MSP430FW425IPM — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller MSP430FW425IPM (aynı form faktörü ve ayağa oturma) — farklı olan Flash Memory, Package, SRAM, Product Type, ADC Resolution.

Texas Instruments
Flash Memory: 60 KB
Package: 64-LQFP, 10 x 10 mm
SRAM: 2 KB
İle Karşılaştır MSP430FW425IPM →
Texas Instruments
ADC Resolution: 16-bit Sigma-Delta
İle Karşılaştır MSP430FW425IPM →
Texas Instruments
Flash Memory: 32 KB (32K x 8 plus 256 B)
Package: 64-pin LQFP (10 x 10 mm)
SRAM: 1 KB
İle Karşılaştır MSP430FW425IPM →

MSP430F425IPM

✅ Yerleştirme
Texas Instruments
📦 64-LQFP (10 mm x 10 mm)
16-bit mixed-signal microcontroller · 8 MHz · MSP430 CPU16, 16-bit RISC · 1.8 V to 3.6 V · 16 KB · 512 bytes · 3 · 16-bit Sigma-Delta

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MSP430FW427IPM

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Texas Instruments
📦 64-LQFP (10 mm x 10 mm)
16-bit mixed-signal microcontroller · MSP430 CPU16 RISC · 8 MHz · 32 KB (32K x 8 plus 256 B) · 1 KB · 3 x 16-bit sigma-delta ADCs · 128 segments · Yes

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MSP430FW428IPM

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 64-LQFP (10 mm x 10 mm)
Same MSP430FW425 family and 64-LQFP footprint; the FW428 differs in internal resource capacity while retaining the flow-meter-oriented architecture.

📋 Katalogda Olmayan Referans Alternatifi

MSP430FW429IPM

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 64-LQFP (10 mm x 10 mm)
Same MSP430FW425 family and 64-LQFP footprint; the FW429 changes internal resource capacity and peripheral emphasis relative to the 512-byte-SRAM FW425.

📋 Katalogda Olmayan Referans Alternatifi

MSP430FW427IPMR

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 64-LQFP (10 mm x 10 mm)
Uses the same 64-LQFP family footprint and offers a different internal resource balance; the R suffix changes reel packaging rather than the electrical function.

📋 Katalogda Olmayan Referans Alternatifi

MSP430FW425IPM Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type 16-bit mixed-signal microcontroller
CPU Architecture 16-bit RISC
Maximum CPU Frequency 8 MHz
Flash Memory 16 KB
SRAM 512 bytes
Program Memory Organization 16K x 8 plus 256 bytes
Specialized Peripherals Rotary-sensing scan interface
Target Application Electronic flow meters
Paket 64-LQFP (10 mm x 10 mm)
Pin Sayısı 64 pins
Montaj Türü Surface mount
Temperature Grade Industrial
RoHS Durumu unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

MSP430FW425IPM 64-lqfp (10 mm x 10 mm) Pin Yapısı Kılavuzu

MSP430FW425IPM (64-lqfp (10 mm x 10 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

64-lqfp (10 mm x 10 mm) paket pin çizelgesi için MSP430FW425IPM

Ayrıntılı pin çıkış verisi mevcut değil: MSP430FW425IPM.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MSP430FW425IPM için uygundur 6 uygulamas: Ultrasonic Flow-Meter Controller, Rotary positive-displacement Meter, Water and Utility Metering, Gas Flow Measurement, Industrial Totalizer and Batch Controller, Smart Meter Communication Hub.

⚡

Ultrasonic Flow-Meter Controller

The MSP430FW425IPM fits an ultrasonic flow-meter controller because its 16-bit MSP430 processor can coordinate transducer timing, measure return intervals, apply calibration, and maintain the displayed flow value. The 8 MHz operating frequency provides useful timing headroom, while 16 KB of flash supports meter firmware and 512 bytes of SRAM provides working storage. Place the MCU beside the analog front end and use the manufacturer pin-description table to connect its capture, timer, and communication signals. Firmware should compensate for transducer propagation delay and monitor echo loss. The main design consideration is that scan-interface behavior differs from ordinary general-purpose MSP430 devices, so timing-sensitive code should be validated under realistic flow conditions.

🔧

Rotary positive-displacement Meter

The MSP430FW425IPM is appropriate for rotary positive-displacement meters where a sensor tracks movement of the measuring element and the MCU converts those events into volume or flow totals. Its dedicated rotary-sensing scan interface can reduce the need for a separate signal-conditioning path, while the 16-bit CPU performs event counting, direction checks, filtering, and calibration. The industrial 64-LQFP package provides a compact controller footprint for battery- or line-powered meter electronics. Firmware should include debounce, missed-pulse detection, overflow handling, and tamper monitoring. Because scan timing is central to accuracy, validate sensor polarity, edge behavior, and calibration constants on the final mechanical assembly.

🏭

Water and Utility Metering

The MSP430FW425IPM can serve as the embedded controller in compact water meters, positive-displacement counters, and utility measurement modules. Its 16 KB flash holds operating firmware and calibration tables, while 512 bytes of SRAM supports running totals, timing state, and communication buffers. The metering-specific scan interface allows the MCU to work directly with compatible rotational sensing arrangements rather than relying only on general-purpose digital inputs. A practical implementation should include low-battery indication, data-integrity checks, scheduled readout support, and fault flags for sensor or mechanical errors. Validate the selected MCU's electrical limits and industrial temperature requirements against the meter's environmental enclosure and expected service life.

⚡

Gas Flow Measurement

The MSP430FW425IPM is suitable for gas-meter electronics that require repeatable pulse acquisition, compensation, totalization, and a compact embedded controller. Its 8 MHz 16-bit MSP430 architecture can combine timer-based flow calculation with scan-interface acquisition when the meter's sensor produces compatible rotational signals. The 64-LQFP package is practical for multi-board meter assemblies, and the dedicated flash supports field-updatable firmware where permitted. Design the firmware around sensor diagnostics, flow-range validation, rollover handling, and configuration checksums. Gas meters also demand careful attention to power integrity, EMC, thermal conditions, and regulatory validation, none of which can be established from the basic controller specifications alone.

🏭

Industrial Totalizer and Batch Controller

The MSP430FW425IPM can act as the control and measurement core of an industrial totalizer when a rotary mechanism or flow sensor feeds the MCU's scan hardware. The processor handles preset comparisons, start and stop sequencing, accumulated volume, alarm conditions, and communication with an operator interface. Its 16 KB flash is adequate for focused embedded firmware, while 512 bytes of SRAM supports active timing and batch-state variables. Use timers and interrupt priorities carefully so the metering path is not delayed by display or communications work. Apply watch-dog and brownout behavior according to the manufacturer guidance, and perform a long-duration test to verify that accumulated totals remain accurate across power cycles and temperature changes.

🌐

Smart Meter Communication Hub

The MSP430FW425IPM can act as the measurement and communication hub in a connected flow meter, handling sensor acquisition, local totalization, diagnostics, and transfer of readings to a display or communications interface. Its 16-bit processing architecture and dedicated metering peripherals separate time-critical acquisition from higher-level reporting functions, while 16 KB flash stores the embedded protocol and measurement routines. A robust implementation should use buffered readings, timestamps, integrity checks, and defined recovery behavior for interrupted communication. Confirm peripheral assignments and interrupt resources in the manufacturer documentation before selecting communication pins. If the meter uses only conventional digital sensors and not the rotary scan interface, evaluate the more general MSP430F425IPM instead.

Önerilen Ürünler Özeti

MSP430F425IPM Texas Instruments Kullanıldığı Yer: Ultrasonic Flow-Meter Controller, Industrial Totalizer and Batch Controller MSP430FW427IPM Texas Instruments Kullanıldığı Yer: Rotary positive-displacement Meter MSP430FW428IPM Same-family MSP430FW option with a different internal resource balance Kullanıldığı Yer: Water and Utility Metering MSP430FW429IPM Same-family MSP430FW option with a different internal resource balance Kullanıldığı Yer: Gas Flow Measurement MSP430FW427IPMR Same-family 64-LQFP MSP430FW option with a reel-packaging ordering code Kullanıldığı Yer: Smart Meter Communication Hub
What are the key specifications of MSP430FW425IPM that engineers should know?
The MSP430FW425IPM is a 16-bit RISC mixed-signal microcontroller operating up to 8 MHz, with 16 KB of flash memory, 512 bytes of SRAM, a rotary-sensing scan interface, and a 64-LQFP package measuring 10 mm by 10 mm. According to the Texas Instruments product page, the device is specifically positioned for electronic flow meters. These characteristics make it appropriate for compact metering electronics that combine sensor acquisition, embedded calculation, and control functions.
What is MSP430FW425IPM used for?
The MSP430FW425IPM is primarily used in electronic flow meters and related metering instruments. Its 16-bit MSP430 processor, 8 MHz maximum operating frequency, 16 KB flash memory, and 512 bytes of SRAM support embedded measurement logic, while the rotary-sensing scan interface is tailored to sensing moving meter mechanisms. According to Texas Instruments, the device targets flow-meter applications with integrated sensing and control.
What is the memory configuration of MSP430FW425IPM?
The MSP430FW425IPM contains 16 KB of flash memory, organized as 16K x 8 plus 256 bytes, and 512 bytes of SRAM. Flash provides nonvolatile program storage for meter firmware, calibration constants, and configuration data, while SRAM holds working variables during measurement and communication operations. The memory figures are stated in the Texas Instruments product listing and distributor product records.
What package and mounting style does MSP430FW425IPM use?
The MSP430FW425IPM uses a 64-pin LQFP surface-mount package measuring 10 mm by 10 mm. The Texas Instruments product listing identifies the device as a 64-LQFP industrial-grade MCU, and its ordering code uses the IPM package suffix. Use the manufacturer pin-description table and land-pattern guidance when assigning signals and laying out the PCB.
What is the rotary-sensing scan interface in MSP430FW425IPM?
The rotary-sensing scan interface is the specialized peripheral that differentiates the MSP430FW425 from general-purpose MSP430 devices. Texas Instruments identifies it as a scan interface intended for rotary sensing and flow-meter implementations. It allows the MCU to work with position-related signals while retaining a compact, integrated metering architecture; exact signal timing and electrical limits should be taken from the manufacturer datasheet.
Where can I download the MSP430FW425IPM datasheet PDF?
The official MSP430FW425 documentation is available through the Texas Instruments product page at https://www.ti.com/product/MSP430FW425. From that page, engineers can access the device data sheet, ordering information, parameters, and support documentation for the MSP430FW425 family. The IPM ordering code identifies the 64-LQFP industrial package shown on this page.
Where can I find the MSP430FW425IPM pinout?
The MSP430FW425IPM pinout is published in the pin-description section of the Texas Instruments MSP430FW425 device data sheet linked from https://www.ti.com/product/MSP430FW425. The component uses a 64-pin LQFP outline, so engineers should map all package positions from the manufacturer drawing and verify the exposed pad, power pins, scan signals, and debugging functions before routing the board.
MSP430FW425IPM vs MSP430F425IPM - which is better for a flow meter?
The MSP430FW425IPM is the stronger choice when the meter uses the device's rotary-sensing scan interface because Texas Instruments positions it specifically for flow-meter designs. The MSP430F425IPM shares the 16-bit MSP430 architecture, 8 MHz operation, 16 KB flash, and 64-LQFP format, but the FW425 adds dedicated rotary-sensing capability. Final compatibility must be checked against the original schematic and pin-description table.
When should I choose MSP430FW425IPM over MSP430F425IPM?
Choose the MSP430FW425IPM when the design requires the dedicated rotary-sensing scan interface or is being created specifically for compact flow-meter electronics. Choose the MSP430F425IPM only when its peripheral set and pin behavior satisfy the meter design without those FW-specific functions. Both devices are listed with a 16-bit 8 MHz architecture, 16 KB flash, and 64-LQFP package.
What can replace MSP430FW425IPM on the same PCB?
The closest same-package replacement candidates are the MSP430F425IPM and MSP430FW425 family members that use the 64-LQFP outline. A replacement should be accepted only after comparing pin names, scan-interface behavior, supply requirements, clock configuration, firmware dependencies, and metering accuracy. Use the Request a Quote form on this page for availability and lead-time information for MSP430FW425IPM and qualified alternatives.
Is MSP430F425IPM a drop-in replacement for MSP430FW425IPM?
The MSP430F425IPM is a potential 64-LQFP replacement because product records list the same 16-bit 8 MHz architecture and 16 KB flash configuration, but it should not be treated as an automatic software-compatible substitute. The FW425 includes a rotary-sensing scan interface that may change pin use and firmware requirements. Confirm the device pin table and validate the replacement on production-equivalent hardware.
Is MSP430FW425IPM suitable for industrial flow-meter designs?
The MSP430FW425IPM is suitable for industrial flow-meter concepts because Texas Instruments identifies it as an industrial-grade 16-bit mixed-signal MCU with a rotary-sensing scan interface. Its 8 MHz maximum CPU frequency and 16 KB flash provide dedicated firmware capacity, while the 10 mm by 10 mm 64-LQFP package supports compact meter electronics. Validate operating-temperature, EMC, accuracy, and lifetime requirements before production release.
Where can I buy MSP430FW425IPM online?
Use the Request a Quote form on this page to request MSP430FW425IPM availability, current lead time, and commercial terms from XAIPART. The component is identified as a Texas Instruments 16-bit, 8 MHz, 16 KB-flash, 512-byte-SRAM MCU in a 64-LQFP industrial package. The form lets buyers request sourcing information without relying on a static price that may change with currency, quantity, or inventory status.
What is the price of MSP430FW425IPM?
The current commercial price for MSP430FW425IPM is obtained through the Request a Quote form on this page. No fixed unit price is stated because pricing depends on order quantity, availability, currency, and supply conditions. The form also provides a direct route to confirm lot size, delivery timing, and any applicable traceability requirements for the 64-LQFP device.
What is the lead time and stock status for MSP430FW425IPM?
Current stock status and lead time for MSP430FW425IPM should be confirmed through the Request a Quote form on this page. The part is a Texas Instruments MSP430FW425 family device in the IPM 64-LQFP package, and sourcing conditions can change independently of the technical specification. Submit the required quantity and target delivery location so the current supply position can be reviewed.
How much power does MSP430FW425IPM consume?
The MSP430FW425IPM is designed around the MSP430 low-power embedded-control architecture, but its exact active, standby, and shutdown currents must be taken from the MSP430FW425 manufacturer data sheet. Do not transfer the current figures published for the related MSP430F425 without confirming the operating mode, clock, voltage, and peripheral state. Request a Quote for commercial information, and use the datasheet for the electrical design.

Mühendislik referans verileri: MSP430FW425IPM — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the MSP430FW425IPM when designing an electronic flow meter or rotary-sensing instrument that benefits from the dedicated scan interface, 16-bit processing, 16 KB flash, and compact 64-LQFP package. Choose the MSP430F425IPM when the same basic MSP430 resource profile and package are useful but the FW-specific rotary-sensing interface is not required. The higher-capacity MSP430FW427IPM, MSP430FW428IPM, and MSP430FW429IPM may be preferable when additional internal resources or expanded peripheral capability are needed without changing the 64-LQFP board outline. Before approving any substitution, compare the complete pin table, scan behavior, memory map, clock setup, interrupt priorities, firmware dependencies, temperature limits, and EMC configuration. A mechanically similar package is necessary but not sufficient: validate the replacement through meter calibration, fault injection, power-cycling, and long-duration accuracy tests before production use.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MSP430F425IPM MSP430FW427IPM MSP430FW428IPM MSP430FW429IPM MSP430FW427IPMR
Package 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Rotary-Sensing Scan Interface Yes No Yes Yes Yes Yes

Ana Farklılayıcılar

  • Dedicated rotary-sensing interface for metering designs (karşılaştırma:MSP430F425IPM)
  • Compact 16-bit control with dedicated flash and SRAM (karşılaştırma:MSP430F425IPM)
  • Resource-expansion options within the same MSP430FW family (karşılaştırma:MSP430FW427IPM)

Tasarım Notları

Use the manufacturer pin-description table and recommended LQFP land pattern when assigning the 64 signals and thermal pad. Keep the scan-interface routing short, preserve the documented grounding and supply-decoupling topology, and isolate sensitive sensor inputs from switching or communication return currents. Because the package has 64 positions, verify every footprint-library pad mapping against the IPM mechanical drawing before releasing the PCB.

Treat scan signals as timing-critical metering inputs. Route them away from clocks, relays, LCD interfaces, and other high-edge-rate nodes; use a continuous ground reference beneath the relevant signal path; and terminate or filter lines when the sensor or board wiring makes reflections likely. Validate signal polarity, threshold levels, and settling behavior with oscilloscope measurements on the assembled meter rather than relying only on functional flow tests.

Do not substitute a general-purpose MSP430F425 device into an FW425 design without checking the scan-interface pins, firmware model, interrupt behavior, and boot configuration. Conversely, moving to a higher-capacity MSP430FW family member may alter memory mapping, firmware size, clock setup, or peripheral resources. Review the manufacturer migration guidance, rebuild the project with the exact device header, and run production-equivalent calibration and fault-response tests.

Follow the MSP430FW425 datasheet for supply-voltage limits, decoupling, clock startup, and low-power-state transitions. Place required bypass capacitors close to their assigned device pins and keep analog sensor ground return current out of the digital return path. If the meter uses a battery or energy-harvesting supply, measure sleep current across the complete system because sensor leakage and interface circuits can dominate the MCU's contribution.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The manufacturer and distributor records do not provide explicit compliance values for this exact ordering code. Use the current Texas Instruments product declarations and material compliance records for production qualification.

Veri doğrulanma tarihi: 2026-11-10 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

MSP430FW425IPM datasheet MSP430FW425IPM pinout MSP430FW425IPM datasheet pdf MSP430FW425IPM equivalent MSP430FW425IPM replacement MSP430FW425IPM vs MSP430F425IPM MSP430FW425IPM price MSP430FW425IPM stock Texas Instruments MSP430FW425IPM MSP430FW425IPM 64-LQFP footprint MSP430FW425IPM flow meter MSP430FW425IPM rotary sensing MSP430FW425IPM schematic MSP430FW425IPM cross reference

İlgili Bileşenler ve Terimler

Texas Instruments MSP430FW425IPM MSP430FW425 MSP430F425IPM MSP430FW427IPM MSP430FW428IPM MSP430FW429IPM MSP430FW427IPMR MSP430 16-bit RISC microcontroller mixed-signal microcontroller embedded controller rotary-sensing scan interface electronic flow meter 16 KB flash memory 512-byte SRAM 8 MHz clock 64-LQFP LQFP package surface-mount semiconductor industrial temperature grade flow measurement metering electronics Texas Instruments cross-reference search
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle