Texas Instruments

OPA103DM - Low-Drift FET Op Amp | Texas Instruments

MPN: OPA103DM ✓ Aktif
0.000001 uA, as reported by the Vyrian listing Id TO-99, 8-pin through-hole Package
MOQ: 1 |

OPA103DM Genel Bakış

The Texas Instruments OPA103DM is a precision, low-drift, low-bias-current operational amplifier with FET input stages, supplied in an 8-pin TO-99 package. It is intended for instrumentation and measurement applications where input bias current, offset drift, and signal integrity are important design considerations. The OPA103DM is identified as a single operational amplifier, and distributor listings describe it as a low-drift, low-bias-current FET-input amplifier with eight wire-form terminals in a round TO-99 package.

An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages while providing high open-loop gain, stable operation across a specified frequency range, and output-drive capability suitable for feedback-based signal conditioning. The OPA103DM belongs to the broader operational-amplifier, analog-amplifier, and integrated-circuit hierarchies. Its FET input stage is particularly relevant to high-impedance sources because input bias current is typically a more important design constraint than offset voltage when measuring currents, sensing sensor outputs, or amplifying signals from high-impedance transducers.

The principal application benefits of the OPA103DM are its low bias current and low drift behavior, which help preserve the integrity of slowly changing or high-impedance signals. A low-bias-current input stage reduces the error introduced when the source impedance interacts with amplifier input bias current. Low drift also improves stability when the amplifier is used in precision DC applications where temperature changes or long operating intervals can cause input offset voltage to shift. The exact gain-bandwidth, slew-rate, offset-voltage, noise, and supply-voltage limits must be confirmed in the manufacturer datasheet before final circuit design.

OPA103DM circuits are commonly used with resistive feedback networks for noninverting and inverting amplifiers, current-to-voltage conversion, buffer stages, and precision measurement front ends. Because this is an analog device, the surrounding circuit determines practical accuracy as much as the amplifier itself. Resistor matching, clean grounding, short feedback paths, suitable bypass capacitors, and control of leakage currents around high-impedance nodes are essential. The TO-99 package is a through-hole package with a larger physical format than modern surface-mount op-amp packages, which can simplify prototyping and provide generous spacing between sensitive terminals.

When designing a replacement or equivalent, engineers should compare the complete electrical specification set, including supply range, input common-mode range, input bias current, input offset voltage, drift, noise, gain-bandwidth product, slew rate, output swing, quiescent current, and the exact pin assignment. The OPA103DM designation identifies a specific package and ordering configuration, so package suffix changes are not automatically drop-in replacements. The TO-99 pinout and manufacturer ordering information should be checked against the circuit board footprint and the required temperature grade.

This page provides an engineering-oriented overview of the OPA103DM, including its package identity, application context, comparison structure, and design guidance. Use the Request a Quote form on this page for current commercial availability, lead-time discussion, and procurement support without relying on a static price reference.

Drop-in alternatifler için OPA103DM — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu ürüne yer değiştirme seçenekleri mevcut değil.

Alternatifleri Talep Edin

OPA103DM Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type Precision operational amplifier
Input Stage FET input
Number of Amplifiers 1 amplifier
Package Type TO-99, 8-pin through-hole
Number of Terminals 8 terminals
Terminal Form Wire
Package Shape Round
Maximum Bias Current at 25C 0.000001 uA, as reported by the Vyrian listing
Montaj Türü Through-hole

OPA103DM round Pin Yapısı Kılavuzu

OPA103DM (round paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

round paket pin çizelgesi için OPA103DM

Ayrıntılı pin çıkış verisi mevcut değil: OPA103DM.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

OPA103DM için uygundur 6 uygulamas: High-Impedance Sensor Signal Conditioning, Precision Current-to-Voltage Conversion, Precision Current Monitoring, Laboratory Instrumentation Front End, Low-Level DC Amplification, Medical and Biosignal Buffering.

🧩

High-Impedance Sensor Signal Conditioning

OPA103DM fits precision signal-conditioning stages for high-impedance sensors because its FET-input architecture emphasizes low input bias current and low drift. Place the amplifier close to the sensor output, use guarded or shielded input routing, and select feedback resistors that balance input loading against thermal-noise contribution. The amplifier should be verified against the manufacturer common-mode and supply limits, particularly when the sensor output can approach either rail. For slow-changing sensor signals, low drift helps preserve baseline accuracy across temperature, while low bias current reduces the error produced by current flowing through a high source impedance.

⚡

Precision Current-to-Voltage Conversion

OPA103DM can serve as a transimpedance or current-to-voltage amplifier when the source current is small and the feedback resistance is high. Its low-bias-current input characteristic is advantageous in circuits where sensor current flows through a large sense resistor or feedback network. Keep the summing input node compact and guard against contamination and leakage, and check whether the amplifier input common-mode range permits the output voltage required by the conversion. Stable feedback layout and careful compensation are essential because high-value feedback resistors can interact with stray capacitance and reduce phase margin.

🏭

Precision Current Monitoring

OPA103DM is appropriate for low-level current monitoring when measurement accuracy is influenced more by input bias current and offset drift than by high bandwidth. The device can amplify the voltage produced by a current shunt or current-to-voltage stage before ADC acquisition. Keep the shunt and amplifier input in the same clean analog return path, use a differential arrangement when ground offsets are significant, and verify that the amplifier input common-mode range covers the shunt voltage. The final error budget should include resistor tolerance, amplifier offset, drift, bias-current error, and ADC accuracy.

🔧

Laboratory Instrumentation Front End

OPA103DM is well matched to laboratory instruments that buffer weak sources before measurement or conversion. Its low drift supports repeatable readings from sources whose voltage changes slowly, while the FET input stage helps avoid loading high-impedance probes. Use low-leakage construction around the input, short feedback traces, and separate sensitive-input routing from power and digital paths. Confirm the amplifier's offset voltage, noise, supply range, and temperature limits in the manufacturer datasheet before using the device as the reference channel of a precision measurement system.

📊

Low-Level DC Amplification

OPA103DM supports low-level DC amplification where preserving small input offsets over time is important. A noninverting or differential stage can amplify the signal while retaining the common benefit of low input bias current. Use resistor networks with suitable tolerance and temperature coefficients, provide adequate bypass capacitance at the supply pins, and avoid placing leakage-producing board contamination near the input. The achievable accuracy still depends on the manufacturer's input offset-voltage rating, drift specification, output range, and the stability of the reference or sensor driving the amplifier.

💊

Medical and Biosignal Buffering

OPA103DM may be used in low-level bio-signal buffering when its input bias current, drift, supply range, and noise meet the circuit requirements. The FET input stage can reduce disturbance of high-impedance electrodes, but application safety depends on complete system design rather than the amplifier alone. Use isolation and protection appropriate to the medical application, prevent patient leakage paths through the amplifier board, and keep exposed sensitive nodes clean and guarded. Confirm the electrical ratings and applicable qualification requirements before incorporating the device into a medical product.

Önerilen Ürünler Özeti

OPA103DM Texas Instruments Kullanıldığı Yer: High-Impedance Sensor Signal Conditioning, Precision Current-to-Voltage Conversion, Precision Current Monitoring, Laboratory Instrumentation Front End, Low-Level DC Amplification, Medical and Biosignal Buffering OPA134 Related precision operational-amplifier family candidate Kullanıldığı Yer: High-Impedance Sensor Signal Conditioning, Precision Current-to-Voltage Conversion, Precision Current Monitoring, Laboratory Instrumentation Front End, Low-Level DC Amplification, Medical and Biosignal Buffering
What is OPA103DM?
OPA103DM is a precision, low-drift, low-bias-current FET-input operational amplifier from Texas Instruments, originally associated with Burr-Brown. Distributor listings identify the device as an analog integrated circuit in an 8-pin TO-99 through-hole package. Its FET input architecture is useful in precision measurement circuits where source impedance and input bias current determine the achievable measurement accuracy.
What package does OPA103DM use?
OPA103DM uses an 8-pin TO-99 round through-hole package. The listings describe the terminal form as wire and the package shape as round. Because the suffix identifies a specific package configuration, engineers should confirm the physical lead arrangement and pin functions against the manufacturer datasheet before assembling or modifying a circuit board.
Why is OPA103DM suitable for high-impedance measurements?
OPA103DM is designed around a FET input stage and is identified as a low-bias-current operational amplifier. The listing reports a maximum bias current of 0.000001 uA at 25C, subject to confirmation against the manufacturer specification. Low bias current reduces the voltage error created when bias current flows through a high source impedance, making the device relevant to sensor and current-measurement front ends.
What are the key specifications of OPA103DM that engineers should know?
OPA103DM is a single precision FET-input operational amplifier in an 8-pin TO-99 package. Its most prominent documented characteristics are low drift, low input bias current, and suitability for precision instrumentation. The exact gain-bandwidth product, slew rate, input offset voltage, supply range, common-mode range, noise, and temperature limits must be taken from the manufacturer datasheet before release to production.
Where can I download the OPA103DM datasheet PDF?
The OPA103DM datasheet can be located through the Texas Instruments product documentation or through the linked datasheet archive and specialist document pages. Use the manufacturer document for final design decisions because it defines the exact pinout, absolute maximum ratings, test conditions, and ordering information for the OPA103DM. The Request a Quote form on this page can also provide documentation and procurement support.
Where can I find the OPA103DM pinout?
The OPA103DM pinout must be taken from the pin-description section of the manufacturer datasheet because the public search results identify the package but do not reproduce the terminal functions. The device is an 8-terminal TO-99 package, so verify pin numbers directly in the datasheet before wiring a new board or adapting an existing amplifier circuit.
Can OPA103DM be used for instrumentation amplifier designs?
OPA103DM can be used in precision instrumentation and measurement front ends when its supply, common-mode, noise, drift, and output-swing requirements fit the application. Its low-bias-current FET input stage is valuable for high-impedance sensor sources. Use matched feedback resistors, protect sensitive inputs from ESD and leakage, and confirm the common-mode operating range against the manufacturer datasheet.
What is the difference between OPA103DM and a general-purpose op amp?
OPA103DM differs from a general-purpose operational amplifier through its emphasis on low input bias current and low drift, together with a precision FET-input implementation. Those characteristics are important when the source impedance is high or the measured signal changes slowly. Exact comparisons of offset voltage, bandwidth, noise, and supply limits require the manufacturer datasheet because those values are not stated in the product listing excerpt.
OPA103DM vs OPA103 — which package should I select?
OPA103DM is the ordering configuration associated with the 8-pin TO-99 package. A different OPA103 suffix may use another package or ordering option, so it should not be treated as a footprint-compatible substitute without checking the datasheet. For a board designed around the OPA103DM TO-99 footprint, select a replacement only after confirming the lead geometry and every pin function.
What is the best drop-in replacement for OPA103DM?
No drop-in replacement can be confirmed from the available cross-reference material because the results provide search tools rather than an identified OPA103DM equivalent with a verified TO-99 pinout and matching electrical ratings. Request a quote for the exact OPA103DM MPN, and have any proposed replacement checked for pin assignment, supply range, common-mode range, bias current, drift, bandwidth, and package dimensions.
Can OPA103DM replace a conventional TO-99 operational amplifier?
OPA103DM may be electrically suitable for some conventional TO-99 amplifier positions, but package match alone does not establish replacement compatibility. The circuit must also satisfy the input common-mode range, supply voltage, output swing, stability, bias current, noise, and bandwidth requirements. Verify all eight pins and the manufacturer absolute maximum ratings before substituting it.
When should I choose OPA103DM over another low-drift amplifier?
Choose OPA103DM when the design needs very low input bias current, low drift, and a FET-input precision amplifier in the 8-pin TO-99 format. It is particularly appropriate for high-impedance transducers and precision measurement circuits. Select another amplifier when its lower bias current, wider bandwidth, lower noise, smaller footprint, or specified temperature grade provides a clearer system advantage.
Is OPA103DM suitable for battery-powered equipment?
OPA103DM may be suitable for battery-powered equipment if its quiescent current and supply voltage range meet the power budget. The manufacturer datasheet must be used to confirm operating voltage, current consumption, and input common-mode limits. Include the current drawn by the surrounding feedback network and any bias-current or leakage requirements in the final power calculation.
Where to buy OPA103DM online?
Use the Request a Quote form on this page to request OPA103DM availability, current commercial terms, and lead time without relying on a static listing price. The product is a catalog operational amplifier with an established manufacturer datasheet and distributor records. The form also lets you specify the required package, quantity, and inspection needs.
What is the price of OPA103DM?
Use the Request a Quote form on this page for the current OPA103DM price and quantity-dependent commercial terms. This page does not publish a static price because availability and pricing for legacy and specialty operational amplifiers can change with quantity and market conditions. Provide the required order quantity and destination for an accurate quotation.
Is OPA103DM in stock and what is its lead time?
Current OPA103DM stock and lead time should be confirmed through the Request a Quote form on this page. Distributor search records show catalog availability for the exact MPN, but they do not establish a current transferable quantity or a guaranteed lead time. A quotation provides the most appropriate confirmation for production planning.
What design practices matter for an OPA103DM precision circuit?
Use short feedback paths, clean supply bypassing, grounded shields around high-impedance inputs, and resistor values low enough to preserve the intended accuracy without excessive loading. Keep moisture, flux residue, and contamination away from sensitive input nodes because leakage can dominate the error when the source impedance is high. Confirm stable operation across the intended supply range and temperature range.

Mühendislik referans verileri: OPA103DM — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose OPA103DM when the design requires a precision, low-drift FET-input operational amplifier in an 8-pin TO-99 package, especially when the source impedance is high or the measured signal changes slowly. Its documented low-bias-current architecture is valuable for sensor buffering, current monitoring, and precision transimpedance circuits. Do not select a substitute solely because it has eight leads: confirm pin assignments, supply range, input common-mode range, offset voltage, drift, bias current, noise, bandwidth, slew rate, output swing, and temperature grade. Choose a modern surface-mount amplifier instead when board area, power consumption, or higher bandwidth is more important than the TO-99 format. For legacy systems already using the OPA103DM footprint, request the exact MPN through the Request a Quote form and validate any proposed equivalent against the manufacturer datasheet and application circuit.

Tasarım Notları

Route the high-impedance input with a short, guarded trace and keep it away from supply wiring, switching nodes, and exposed connectors. Input leakage from flux residue, moisture, or contaminated board materials can exceed the bias-current error of a precision FET-input amplifier. Clean the board after soldering and use conductive guarding or a grounded shield where the source impedance is high enough for stray capacitance to affect settling.

Use a compact feedback layout and place the feedback components close to the amplifier pins to minimize parasitic capacitance. A high-value feedback resistor improves transimpedance gain but also increases sensitivity to leakage and board contamination. Check the stability and settling requirements against the complete circuit, including source capacitance, probe capacitance, and the manufacturer's recommended compensation arrangements.

Decouple the supply pins with the capacitance and placement required by the manufacturer datasheet, and verify the complete circuit across the intended supply range. Because the OPA103DM uses a precision FET input stage, input common-mode range and output swing must be checked at both extremes rather than inferred from nominal supply voltage. Include power consumption and any unused-amplifier configuration in the thermal and battery-life budget.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The available manufacturer and distributor records do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Veri doğrulanma tarihi: 2026-11-14 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

OPA103DM datasheet OPA103DM pinout OPA103DM datasheet pdf OPA103DM equivalent OPA103DM replacement OPA103DM cross reference OPA103DM TO-99 pinout OPA103DM price OPA103DM stock Texas Instruments OPA103DM OPA103DM low bias current OPA103DM precision amplifier

İlgili Bileşenler ve Terimler

Texas Instruments Burr-Brown OPA103DM OPA103 precision operational amplifier FET-input operational amplifier low-drift amplifier low-bias-current amplifier analog integrated circuit operational amplifier amplifier IC signal-conditioning amplifier transimpedance amplifier current-to-voltage converter high-impedance sensor input bias current input offset voltage drift precision instrumentation TO-99 package 8-pin through-hole package common-mode voltage range gain-bandwidth product slew rate RoHS REACH
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle