PEX8509-AA25BI - 8-Lane 8-Port PCIe Switch | Broadcom
MPN: PEX8509-AA25BI ✓ AktifPEX8509-AA25BI Genel Bakış
A PCI Express switch is a semiconductor within the interface-controller and connectivity hierarchy. It manages transaction traffic between a host or upstream PCIe port and downstream devices, allowing one system bus to serve several endpoints. The PEX8509-AA25BI supports PCIe Gen 1 operation at 2.5 Gbps per lane, provides up to eight ports, and uses integrated SerDes to connect PCIe links to the switching fabric. Its flexible configuration is intended to broaden system connectivity without requiring a separate switch for each endpoint.
The primary feature of this part is its combination of eight PCIe lanes and eight ports in one package. Broadcom describes the PEX 8509 as a low-power switching solution with typical power consumption of 1.2 W. That operating point makes it relevant to space-conscious embedded and communications platforms where link breadth, board area, and power budget all influence product selection. The device supports non-blocking interconnect architectures used in scalable storage and communication equipment.
Technical implementation centers on the integrated SerDes interfaces and PCIe switch fabric. A Gen 1 link operates at 2.5 Gbps, while the switch coordinates traffic arriving from the upstream host and distributing requests to downstream endpoints. Designers must account for lane-to-port mapping, reference-clock requirements, transmitter equalization, receiver configuration, power sequencing, and the high-speed layout constraints of a 196-ball PBGA device. These considerations make careful reference-design review essential before schematic capture or PCB routing.
Typical uses include external storage controllers, server expansion systems, embedded communication platforms, consumer networking equipment, and industrial systems that need multiple PCIe endpoints behind one host connection. The switch is particularly relevant when adding endpoint capacity without redesigning the entire host interface around individual downstream controllers.
A central design consideration is PCB implementation. The 15 mm by 15 mm BGA requires controlled escape routing, a multilayer board with suitable high-speed stack-up, length matching where required, and a power delivery network capable of supporting approximately 1.2 W typical device power while maintaining acceptable voltage behavior at the ball grid.
This product summary consolidates the Broadcom architecture information, package characteristics, application fit, replacement assessment, comparison fields, and implementation guidance needed to evaluate the PEX8509-AA25BI before committing it to a PCI Express switch design.
Drop-in alternatifler için PEX8509-AA25BI — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinPEX8509-AA25BI Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | PCI Express switch |
| PCIe Lane Count | 8 lanes |
| Port Count | 8 ports |
| PCI Express Generation | Gen 1 |
| Per-Lane Data Rate | 2.5 Gbps |
| PCI Express Specification | PCI Express Base Specification Revision 1.1 |
| SerDes Integration | Integrated SerDes |
| Switch Architecture | Non-blocking PCIe switching |
| Typical Power | 1.2 W |
| Package Type | 196-ball PBGA |
| Package Dimensions | 15 mm x 15 mm |
| Ball Count | 196 balls |
PEX8509-AA25BI 15 mm x 15 mm Pin Yapısı Kılavuzu
PEX8509-AA25BI (15 mm x 15 mm paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: PEX8509-AA25BI.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
PEX8509-AA25BI için uygundur 6 uygulamas: Server PCIe Expansion, Storage Controller Expansion, Communications Platform Interconnect, Embedded Industrial Controller, Consumer Network Equipment, External Storage Bridge.
Server PCIe Expansion
The PEX8509-AA25BI fits server expansion designs that need one upstream PCIe connection to serve multiple downstream controllers. Its eight-lane, eight-port switching architecture provides a practical way to organize endpoint traffic while maintaining a non-blocking interconnect topology. Gen 1 operation at 2.5 Gbps per lane limits bandwidth to that generation's stated rate, so the target endpoints must fit within the available aggregate link budget. Before schematic capture, verify lane-to-port mapping, endpoint ordering, reference-clock requirements, and Broadcom's initialization sequence. The 196-ball PBGA also requires a multilayer high-speed layout with carefully controlled power and ground delivery. PEX8509-AA25BI is best suited to legacy or cost-oriented infrastructure where eight PCIe ports and established Gen 1 interoperability matter more than newer-generation throughput.
Önerilen
Storage Controller Expansion
PEX8509-AA25BI is applicable to storage systems that need several PCIe endpoints behind a common host interface. The eight-port switch can organize controller traffic while its 2.5 Gbps per-lane Gen 1 operation establishes the bandwidth ceiling for each PCIe link. Because storage workloads can generate bursty transfer activity, the implementation should account for adequate upstream bandwidth, controlled reference clocks, and a power network that remains stable during data-transfer bursts. Use the Broadcom pin and reference-design guidance to assign lanes, implement clocking, and configure the switch. The 1.2 W typical device power figure must also be included in board-level thermal estimates. PEX8509-AA25BI is most appropriate for storage controllers whose throughput, latency, and generation requirements are compatible with PCIe Gen 1 rather than newer architectures.
Önerilen
Communications Platform Interconnect
The PEX8509-AA25BI can serve as a scalable interconnect in communications equipment that must connect multiple PCIe endpoints to a host or fabric. Its low-power eight-lane, eight-port design and integrated SerDes support an embedded implementation where board area and component count are constrained. The system must allocate PCIe lanes deliberately because the device operates at 2.5 Gbps per lane under PCI Express Gen 1 rules. Clock quality, reference routing, transmitter and receiver configuration, and reset sequencing are central to reliable link establishment. For a communications chassis, review thermal performance under sustained traffic and verify that the multilayer PCB's power and ground planes can support the approximately 1.2 W typical device load. This configuration favors established Gen 1 infrastructure over designs requiring PCIe Gen 2 or newer data rates.
Önerilen
Embedded Industrial Controller
PEX8509-AA25BI is well suited to an embedded industrial controller that needs local PCIe endpoint expansion without implementing a complex switch in the host processor. The integrated SerDes and eight-port architecture reduce the number of separate downstream links managed by the system controller. Industrial designs should confirm operating-temperature requirements against the manufacturer's device documentation and provide a robust startup sequence for power rails, clocks, resets, and switch configuration. The 196-ball PBGA demands careful escape routing, layer transitions, decoupling, and high-speed return-path continuity. Although the typical device power is approximately 1.2 W, local temperature rise depends on the PCB's copper area, thermal design, and surrounding circuitry. The part is best considered for Gen 1 industrial controllers where its eight-port connectivity offers more value than a higher-speed but lower-port-count architecture.
Önerilen
Consumer Network Equipment
The PEX8509-AA25BI can support consumer networking equipment that requires several internal PCIe connections while maintaining a compact board. Its eight lanes and eight ports allow a host interface to service multiple downstream functions, while integrated SerDes simplifies the physical implementation compared with discrete link components. Because the switch is Gen 1, designers should match it to controllers whose real-world throughput does not require newer PCIe rates. Layout preparation must include a multilayer stack-up with continuous ground references, controlled impedance for high-speed nets, and decoupling positioned close to the power balls. Firmware configuration and endpoint ordering should follow Broadcom's documented initialization process to avoid link-training issues. The approximately 1.2 W typical power value also matters in compact consumer products, making board-level thermal design and enclosure heat dissipation important.
Önerilen
External Storage Bridge
PEX8509-AA25BI can be used in an external storage bridge when a controller must connect several PCIe devices through one switched fabric. Its eight-lane architecture provides multiple downstream paths while the non-blocking switch organization supports concurrent transactions at the supported Gen 1 link rate. Storage bridges should validate that the upstream host interface, downstream device bandwidth, and switch lane allocation avoid creating a shared bottleneck. Reference-clock routing, reset sequencing, power-state transitions, and error handling are critical because storage traffic can be burst intensive. The PBGA footprint requires careful layer transitions and return-path continuity, while the approximately 1.2 W typical switch power must be considered alongside the bridge controller and memory subsystem. This use case is appropriate for PCIe Gen 1 storage designs, not bridges requiring the throughput of a newer PCIe generation.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: PEX8509-AA25BI — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Brand | Broadcom |
| Package | 196-ball PBGA, 15 mm x 15 mm |
| PCI Express Generation | Gen 1 |
| Lane Count | 8 lanes |
| Port Count | 8 ports |
| Per-Lane Data Rate | 2.5 Gbps |
| SerDes | Integrated SerDes |
| Typical Power | 1.2 W |
| PCI Express Specification | PCI Express Base Specification Revision 1.1 |
| Switch Architecture | Non-blocking |
Ana Farklılayıcılar
- Eight integrated PCIe ports in one switch (karşılaştırma:PEX8609-BA50BI G)
- Established Gen 1 PCIe architecture (karşılaştırma:PEX8609-BA50BI G)
- Low-power eight-lane switching (karşılaştırma:PEX8609-BA50BI G)
Tasarım Notları
Use a multilayer PCB with continuous ground references for the PEX8509-AA25BI's high-speed SerDes links. Route each PCIe differential pair as a controlled-impedance structure, minimize stubs and layer transitions, and apply the length-tolerance rules stated in the Broadcom reference design. The 196-ball PBGA requires dense escape routing, so fanout vias, antipads, and return-path continuity should be reviewed before fabrication rather than adjusted after signal-integrity analysis.
Estimated thermal-budget input: the Broadcom typical device power is 1.2 W. Actual junction temperature depends on the package thermal resistance, PCB copper area, airflow, and neighboring heat sources, none of which are established for this product configuration. Provide multiple power and ground connections according to the manufacturer ballout, place local decoupling close to the supply balls, and verify startup, current-limit, and sequencing requirements against the full PEX 8509 documentation.
Do not treat PEX8609-BA50BI G as a pin-compatible substitute merely because it appears in a generic compatibility listing. The available technical material does not establish identical ball assignments, SerDes rates, power rails, configuration registers, initialization sequence, or firmware support. For a new design, select the switch from the required lane count, generation, port topology, package, and thermal constraints; for an existing PCB, preserve the exact Broadcom ordering code and consult the manufacturer for approved alternatives.
Uyumluluk Bilgisi
The available product material identifies a PCIe switch and its package but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because this is an industrial/commercial interface semiconductor rather than an automotive-qualified device.