Broadcom

PEX8750-AB80BI - 48-Lane PCIe Gen 3 Switch | Broadcom

MPN: PEX8750-AB80BI ✓ Aktif
BGA-676 Package
MOQ: 1 |

PEX8750-AB80BI Genel Bakış

Broadcom PEX8750-AB80BI is a PCI Express Gen 3 multi-host switching controller with 48 lanes, 12 ports, and an 8.0 GT/s signaling rate, supplied in a 676-ball BGA surface-mount package. The device supports scalable, non-blocking PCIe connectivity for systems that need to connect multiple hosts or endpoints through a centralized switching fabric.

A PCI Express switch is an integrated circuit that routes high-speed serial transactions between multiple PCIe devices, hosts, or downstream ports. Within the broader semiconductor hierarchy, the PEX8750 belongs to the PCI interface controller family, the PCIe switch family, and the broader class of interface ICs. Its multi-host architecture helps equipment designers create flexible server, storage, networking, and communications platforms without requiring a separate switch device for every topology.

The principal specifications are 48 PCIe lanes, 12 ports, and PCI Express Gen 3 operation at 8.0 GT/s. Broadcom documents the device as a fan-out, aggregation, and peer-to-peer interconnection solution with non-blocking switching capability. Its BGA-676 package supports dense integration on multilayer printed circuit boards, while its specified operating-temperature range of -40°C to +85°C covers industrial and commercial system environments.

The multi-host architecture is particularly important when several processor or accelerator domains must communicate through shared PCIe endpoints. A 48-lane switch fabric can aggregate bandwidth and reduce the number of physical interconnect paths required in a platform. At the same time, design complexity increases because each host, endpoint, reference clock, auxiliary power rail, reset domain, and lane assignment must be coordinated through the device configuration and system firmware.

Typical PEX8750 applications include server backplanes, storage systems, rack-mounted communications equipment, and accelerator platforms. Fan-out configurations distribute a host or switch port toward multiple endpoints, while aggregation configurations collect traffic from several downstream devices before forwarding it upstream. Peer-to-peer arrangements allow two host domains to exchange traffic through the same PCIe switching fabric.

For new PCB designs, allocate the BGA-676 land pattern, reference-clock routing, power distribution, and high-speed differential channels according to the Broadcom layout guidance. Validate connector reach, insertion loss, crosstalk, AC coupling, reset behavior, and firmware interoperability on the complete system rather than treating the switch as a conventional low-speed IC.

This product page organizes the documented lane count, port count, signaling rate, package, environmental limits, application roles, and sourcing considerations into an engineering-focused guide. It also distinguishes the switch from generic analog switches and clarifies the verified boundaries of drop-in replacement options for this large BGA device.

Drop-in alternatifler için PEX8750-AB80BI — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

PEX8750-AB80BI G

✅ Yerleştirme
📦 BGA-676
Same 48 lanes, 12 ports, 8.0 GT/s Gen 3 configuration, and BGA-676 package; ordering notation differs by one space and no verified electrical parameter differs.

📋 Katalogda Olmayan Referans Alternatifi

PEX8750-AB80BI Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type Multi-host PCI Express switch
PCIe Generation Gen 3
Maximum Data Rate 8.0 GT/s
Total Lanes 48 lanes
Port Count 12 ports
Switching Architecture Scalable, non-blocking multi-host interconnection
Supported Topology Fan-out, aggregation, and peer-to-peer
Paket BGA-676
Montaj Türü Surface mount
İşletim Sıcaklığı -40°C to +85°C
Interface Signaling PCI Express serial differential signaling
Moisture Sensitivity Moisture-sensitive

PEX8750-AB80BI bga-676 Pin Yapısı Kılavuzu

PEX8750-AB80BI (bga-676 paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

bga-676 paket pin çizelgesi için PEX8750-AB80BI

Ayrıntılı pin çıkış verisi mevcut değil: PEX8750-AB80BI.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

PEX8750-AB80BI için uygundur 6 uygulamas: Server PCIe Backplane Switching, Storage-System Endpoint Aggregation, Rack-Mounted Communications Equipment, Accelerator Fabric Expansion, Industrial Edge and Control Systems, PCIe Storage and Network Expansion.

🖥️

Server PCIe Backplane Switching

The PEX8750-AB80BI fits centralized server backplanes that need to route traffic among multiple hosts and accelerators through one PCIe switching fabric. Its 48 lanes and 12 ports provide the scale required for fan-out and aggregation arrangements, while the documented 8.0 GT/s Gen 3 rate supports high-bandwidth server links. The non-blocking architecture helps preserve concurrency when several downstream domains exchange traffic. Deployment still requires careful lane assignment, reference-clock distribution, reset coordination, and firmware configuration. The BGA-676 package also demands a multilayer PCB with controlled impedance and high-density assembly capability.

🖥️

Storage-System Endpoint Aggregation

The PEX8750-AB80BI is suitable for storage platforms that aggregate multiple PCIe endpoints behind a scalable switching fabric. Its 48 lanes and 12 ports allow several downstream devices to communicate through a common non-blocking switch architecture rather than requiring separate host adapters. The 8.0 GT/s Gen 3 signaling rate supports high-throughput storage traffic, although effective throughput depends on lane utilization and endpoint performance. Fan-out, aggregation, and peer-to-peer operating modes support different chassis arrangements. Designers should validate connector reach, insertion loss, reset behavior, and device firmware against the complete storage topology.

🌐

Rack-Mounted Communications Equipment

The PEX8750-AB80BI can support rack-mounted communications systems that connect multiple processing modules, line cards, or service processors through PCIe. Its 12-port, 48-lane configuration provides a practical basis for fan-out and aggregation topologies in dense platforms, and the non-blocking switch supports simultaneous traffic paths. At 8.0 GT/s, the device handles Gen 3 serial links while preserving modular system architecture. The BGA-676 package is appropriate for high-layer-count boards with dense escape routing. Thermal, power-integrity, clock, and signal-integrity validation remain essential in equipment with sustained high-bandwidth traffic.

🏭

Accelerator Fabric Expansion

The PEX8750-AB80BI is appropriate for accelerator systems that require several compute or storage endpoints to communicate through a common PCIe switch fabric. The documented 48 lanes and 12 ports support scalable aggregation and peer-to-peer arrangements, while 8.0 GT/s Gen 3 operation provides a consistent link rate across the fabric. Its non-blocking architecture can support concurrent transfers without forcing a simple point-to-point topology. Integration remains complex because the board must preserve reference-clock quality, differential-pair impedance, power sequencing, and reset domains. Firmware configuration must also match the intended accelerator discovery and routing behavior.

🏭

Industrial Edge and Control Systems

The PEX8750-AB80BI's -40°C to +85°C operating range makes it suitable for industrial edge systems that combine controllers, vision modules, storage, and networked peripherals. The 48-lane, 12-port switch fabric can connect multiple computing domains while supporting fan-out, aggregation, or peer-to-peer traffic patterns. Gen 3 operation at 8.0 GT/s provides useful bandwidth for data-intensive edge equipment without requiring a separate switch for each endpoint. Because the device uses BGA-676 packaging, the PCB should provide robust thermal management and manufacturing controls. Validate environmental temperature rises and long-duration traffic loading in the final enclosure.

🌐

PCIe Storage and Network Expansion

The PEX8750-AB80BI can provide a central switching layer for systems that expand PCIe storage or network functions beyond the capabilities of a root complex. Its 12 ports and 48 lanes allow multiple downstream devices to share an ordered, non-blocking PCIe fabric, while the 8.0 GT/s Gen 3 rate accommodates high-volume transactions. The architecture supports fan-out from a host, aggregation toward an upstream port, and peer-to-peer exchanges between domains. Practical implementation requires attention to connector and cable limitations, AC-coupled lane design, reference-clock routing, and administrative software. Performance testing should cover congestion and simultaneous endpoint traffic, not only maximum transfer rate.

Önerilen Ürünler Özeti

PEX8750-AB80BI G Same Broadcom PCIe Gen 3 switching configuration in alternate ordering notation Kullanıldığı Yer: Server PCIe Backplane Switching, Storage-System Endpoint Aggregation, Rack-Mounted Communications Equipment, Accelerator Fabric Expansion, Industrial Edge and Control Systems, PCIe Storage and Network Expansion
What is the PEX8750-AB80BI?
The PEX8750-AB80BI is a Broadcom multi-host PCI Express switching controller with 48 lanes, 12 ports, and Gen 3 signaling up to 8.0 GT/s. According to the Broadcom PEX8750 product documentation, it provides scalable, non-blocking interconnection for servers, storage systems, and communications platforms. The device is packaged as a surface-mount BGA-676 and is specified for operation from -40°C to +85°C.
How many PCIe lanes and ports does the PEX8750-AB80BI provide?
The PEX8750-AB80BI provides 48 PCIe lanes and 12 ports. According to the Broadcom PEX8750 product documentation, the device supports multi-host switching and can be configured for fan-out, aggregation, or peer-to-peer traffic. These capabilities make it useful where several host or endpoint domains must share a centralized high-bandwidth PCIe fabric.
What is the maximum PCIe data rate of the PEX8750-AB80BI?
The PEX8750-AB80BI supports PCI Express Gen 3 operation at a maximum signaling rate of 8.0 GT/s. The Broadcom product documentation identifies the device as a 48-lane, 12-port multi-host switch. Actual application throughput can be lower after protocol overhead, lane utilization, congestion, and endpoint behavior are considered.
Where can I download the PEX8750-AB80BI datasheet?
The PEX8750-AB80BI documentation is available through the Broadcom document page at https://docs.broadcom.com/doc/12351857. Use the manufacturer document for the authoritative pin list, electrical characteristics, reference-clock requirements, power architecture, package drawing, and layout guidance. The octopart datasheet page at https://octopart.com/datasheet/broadcom/PEX8750-AB80BI%20G is an additional document entry point.
Where is the PEX8750-AB80BI pinout located?
The PEX8750-AB80BI pinout is located in the package drawing and pin-description sections of the Broadcom PEX8750 documentation. Because the device uses a 676-ball BGA, the complete assignment covers 676 numbered balls and should be read together with the exposed-pad, power, ground, and high-speed differential-signal requirements. Use the manufacturer pin table directly for PCB design.
What package does the PEX8750-AB80BI use?
The PEX8750-AB80BI uses a surface-mount BGA-676 package. The package specification identifies 676 contacts and an operating range of -40°C to +85°C. Its high pin count supports the device's 48-lane PCIe fabric and multi-port architecture, but it also requires a multilayer PCB, fine-pitch assembly, and careful high-speed routing.
Is the PEX8750-AB80BI suitable for server and storage systems?
Yes, the PEX8750-AB80BI is specifically suited to server and storage systems that require multiple PCIe hosts or endpoints. Broadcom documents the device for scalable, non-blocking fan-out, aggregation, and peer-to-peer interconnection. Its 48 lanes and 12 ports provide substantial fabric capacity, subject to the lane assignments and topology selected in the system design.
What is the difference between the PEX8750-AB80BI and PEX8750-AB80BI G?
The PEX8750-AB80BI and the listing notation PEX8750-AB80BI G identify the same Broadcom PCI Express switch configuration, with the separated G appearing in distributor ordering titles. The documented core configuration remains 48 lanes, 12 ports, Gen 3 signaling at 8.0 GT/s, and a BGA-676 package. Confirm the exact orderable suffix against the manufacturer ordering guide before procurement.
What is the best drop-in replacement for the PEX8750-AB80BI?
The PEX8750-AB80BI G is the closest confirmed same-package option because it represents the same Broadcom device in an alternate distributor ordering notation and retains the 48-lane, 12-port, 8.0 GT/s configuration in BGA-676. No additional verified pin-to-pin alternatives were established. Because this is a complex BGA-676 device, confirm the complete ordering guide, firmware support, and board-specific revisions before treating any substitute as drop-in.
Can a Microchip or Renesas PCIe switch replace the PEX8750-AB80BI?
No direct drop-in replacement should be assumed. The available cross-reference information identifies other PCIe switch families, but it does not establish a 676-ball pin-compatible footprint, matching 48-lane and 12-port configuration, reference-clock implementation, firmware compatibility, and power sequencing with the PEX8750-AB80BI. Such substitutions normally require board-level engineering rather than component replacement.
When should I choose the PEX8750-AB80BI instead of another PCIe switch?
Choose the PEX8750-AB80BI when the design requires a documented 48-lane, 12-port, non-blocking multi-host PCIe switch operating at Gen 3 speeds of up to 8.0 GT/s. It is especially suitable for fan-out, aggregation, and peer-to-peer topologies in servers, storage platforms, and communications equipment. Select another switch only after its lanes, ports, package, firmware, and board-level interface requirements are verified.
Is the PEX8750-AB80BI suitable for peer-to-peer PCIe communication?
Yes, peer-to-peer communication is one of the documented operating modes for the PEX8750-AB80BI. Its 48-lane, 12-port architecture can connect separate host domains through a shared non-blocking switch fabric. The implementation must still configure lane routing, virtual hierarchy, arbitration, reset behavior, and peer-to-peer software support correctly for the intended system architecture.
Where can I buy the PEX8750-AB80BI and check current lead time?
Use the Request a Quote form on this page to ask for the PEX8750-AB80BI, current lead time, stock status, and order quantity. The component is a complex BGA-676 PCIe switch, so schedule and traceability should be confirmed for the exact ordering notation. The form is the appropriate channel for current commercial terms without relying on static pricing.
How much does the PEX8750-AB80BI cost?
Current commercial terms for the PEX8750-AB80BI should be requested through the Request a Quote form on this page. The part is a Broadcom 48-lane, 12-port PCI Express Gen 3 switching controller in BGA-676, and its price and lead time can depend on order quantity and exact ordering suffix. Submit the required quantity and target date for a current quotation.
Is the PEX8750-AB80BI currently in stock?
Current stock for the PEX8750-AB80BI should be confirmed through the Request a Quote form on this page. The manufacturer documentation and current distributor listings identify the device, but live inventory can change rapidly. Provide the exact ordering notation, quantity, shipment destination, and required date so the order can be matched to the correct configuration.
What key specifications should engineers know about the PEX8750-AB80BI?
The key PEX8750-AB80BI specifications are 48 PCIe lanes, 12 ports, Gen 3 operation at up to 8.0 GT/s, and a surface-mount BGA-676 package. Broadcom documents the switch for scalable, non-blocking fan-out, aggregation, and peer-to-peer interconnection. The specified operating range is -40°C to +85°C, making it applicable to industrial and commercial equipment designs.

Mühendislik referans verileri: PEX8750-AB80BI — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the PEX8750-AB80BI when a server, storage platform, communications system, or industrial controller requires a 48-lane, 12-port PCIe Gen 3 switching fabric operating at up to 8.0 GT/s. It is particularly appropriate when the architecture needs fan-out, aggregation, or peer-to-peer connectivity through a non-blocking multi-host switch. The confirmed PEX8750-AB80BI G ordering notation retains the same 48 lanes, 12 ports, 8.0 GT/s signaling, and BGA-676 package, so it is the closest confirmed drop-in choice when the procurement system requires the separated G notation. Other PCIe switch families should be selected only when their package, lane count, port count, clocking, power sequencing, firmware, and connector behavior have been validated. In every case, treat the manufacturer layout guidance as a mandatory part of the hardware design rather than treating the BGA device as a conventional low-speed switch IC.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün PEX8750-AB80BI G
Package BGA-676 BGA-676
Brand Broadcom Broadcom
PCIe Lanes 48 lanes 48 lanes
Port Count 12 ports 12 ports
PCIe Generation Gen 3 Gen 3
Maximum Data Rate 8.0 GT/s 8.0 GT/s
Operating Temperature -40°C to +85°C -40°C to +85°C
Switching Architecture Scalable, non-blocking multi-host PCIe switch Scalable, non-blocking multi-host PCIe switch

Ana Farklılayıcılar

  • Confirmed 48-lane, 12-port non-blocking switching fabric (karşılaştırma:PEX8750-AB80BI G)
  • Supports three PCIe topology roles in one device (karşılaştırma:PEX8750-AB80BI G)
  • Multi-host architecture supports complex system fabrics (karşılaştırma:PEX8750-AB80BI G)

Tasarım Notları

Route every PCIe differential pair as a controlled-impedance, length-matched connection and follow the Broadcom reference-layout guidance for the BGA-676 escape paths. Keep AC-coupling, reference-clock, reset, and auxiliary-power routing compatible with the device's electrical requirements. The 676-ball footprint makes escape routing and layer transitions more demanding than those of a typical perimeter package, so perform field or simulation-based signal-integrity checks before fabrication.

Create a low-impedance power distribution network for the switch and isolate noisy loads from its supply pins. Follow the manufacturer rail-separation, decoupling, and power-sequencing requirements rather than copying a generic BGA layout. Pay particular attention to startup order across the host ports, auxiliary supply, clock, and reset domains because an incorrect sequence can leave the switch unavailable even when steady-state voltages appear correct.

The PEX8750-AB80BI's -40°C to +85°C specification does not remove the need for enclosure-level thermal analysis. Estimate worst-case switch dissipation from the configured lane count, traffic pattern, ambient temperature, and board copper area, then compare junction temperature with the manufacturer limit. Avoid relying solely on the BGA package for heat removal; provide thermal vias and copper spreading as directed by the package and layout documentation.

Do not treat any PCIe switch with the same connector count as a drop-in substitute. A valid replacement must preserve the BGA-676 ball pattern, power rails, reference clocks, reset behavior, lane assignments, administrative firmware, and platform interoperability. For this Broadcom device, verify the exact ordering notation and manufacturer documentation before layout release or production procurement.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The device is listed as moisture-sensitive. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses require confirmation from the manufacturer product documentation or declaration of compliance.

Veri doğrulanma tarihi: 2026-11-11 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

pex8750-ab80bi datasheet PEX8750-AB80BI pinout PEX8750-AB80BI datasheet pdf PEX8750-AB80BI BGA-676 PEX8750-AB80BI 48 lanes PEX8750-AB80BI 12 ports PEX8750-AB80BI 8.0 GT/s Broadcom PEX8750-AB80BI PEX8750-AB80BI equivalent PEX8750-AB80BI replacement PEX8750-AB80BI server switch PEX8750-AB80BI price PEX8750-AB80BI stock PEX8750-AB80BI vs PEX8750-AB80BI G

İlgili Bileşenler ve Terimler

Broadcom PEX8750-AB80BI PEX8750-AB80BI G PCI Express switch PCIe interface controller multi-host switching controller interface IC semiconductor PCI Express Gen 3 PCIe 8.0 GT/s 48-lane PCIe fabric 12-port PCIe switch non-blocking switch fan-out topology aggregation topology peer-to-peer topology BGA-676 BGA package family surface-mount technology SMD server backplane storage system communications equipment reference clock differential pair
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle