PIC16F1579-E/P - 32MHz 8-Bit MCU with 16-Bit PWM | Microchip
MPN: PIC16F1579-E/P ✓ AktifPIC16F1579-E/P Genel Bakış
A microcontroller is a programmable integrated circuit that combines a processor core, program memory, data memory, and peripherals on one chip. PIC16F1579 belongs to the PIC16F family, which uses a mid-range RISC architecture and 14-bit instruction words. It sits within the broader hierarchy of embedded controller, microcontroller, semiconductor, and electronic control components. This integration allows a single device to measure analog inputs, control outputs, execute communications logic, and manage timing functions without requiring separate components for each function.
The PIC16F1579-E/P provides up to four independent 16-bit PWM outputs for applications requiring high timer resolution. Its analog peripherals include 5-bit and 10-bit conversion capabilities. These features make it appropriate for LED-lighting control, motor and stepper control, digital power conversion, signal conditioning, and general-purpose embedded automation. The 32 MHz operating frequency provides additional instruction throughput for interrupt-driven control, digital filtering, and multi-peripheral coordination.
The PIC16F157X architecture combines enhanced timer resources with analog functions rather than relying only on basic digital I/O. Four independent timers support PWM generation with greater resolution than an 8-bit PWM implementation, which can reduce quantization error in dimming, position, current, or duty-cycle control. The 14 KB Flash capacity allows firmware, configuration data, and application constants to be stored on-chip, while the 1 KB RAM provides working memory for variables, stack operations, and intermediate calculations.
Typical installations include high-resolution LED drivers, adjustable lighting systems, motor-control modules, compact stepper-motor controllers, power-supply control boards, and factory automation peripherals. The 20-pin PDIP package also remains useful for prototypes, manually assembled industrial controls, educational platforms, and equipment requiring through-hole serviceability. The wider lead spacing supports hand soldering and socket-based assembly more readily than a fine-pitch surface-mount package.
Designers should treat the device as an automotive-temperature-grade component rather than assume every electrical limit matches the commercial-grade PIC16F1579-I/P. Before releasing a PCB, verify the complete pin assignment, peripheral multiplexing, clock configuration, analog references, and programming interface against the manufacturer datasheet. Decoupling, grounding, timing-sensitive analog routing, and correct oscillator selection are essential for reliable PWM and measurement performance.
This product record combines the exact ordering information, core device characteristics, functional positioning, application guidance, and practical qualification considerations needed to evaluate the PIC16F1579-E/P before schematic capture or production release.
Drop-in alternatifler için PIC16F1579-E/P — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller PIC16F1579-E/P (aynı form faktörü ve ayağa oturma) — farklı olan Mounting Type, Package, ADC Resolution, Temperature Grade.
PIC16F1579-I/P
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →PIC16F1579-E/P Maksimum Değerlendirmeler & Elektriksel Özellikler
| Microcontroller Type | 8-bit RISC PIC microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Program Memory Size | 14 KB Flash (8K × 14 words) |
| Data Memory Size | 1 KB RAM |
| Program Word Width | 14 bits |
| PWM Resolution | 16-bit |
| PWM Module Count | Up to 4 independent modules |
| Analog Conversion Features | 5-bit and 10-bit |
| Paket | 20-pin PDIP |
| Montaj Türü | Through-hole |
| Terminal Count | 20 terminals |
| Package Shape | Rectangular |
| Temperature Grade | Automotive |
| ADC Resolution | 10-bit maximum |
PIC16F1579-E/P rectangular Pin Yapısı Kılavuzu
PIC16F1579-E/P (rectangular paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: PIC16F1579-E/P.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
PIC16F1579-E/P için uygundur 6 uygulamas: High-Resolution LED Lighting Control, Stepper-Motor Driver Control, Digital Power-Supply Controller, Industrial Automation and Monitoring, Automotive Auxiliary Control Module, Educational and Rapid Prototyping Platform.
High-Resolution LED Lighting Control
PIC16F1579-E/P fits LED-lighting systems that benefit from precise duty-cycle adjustment because the MCU provides up to four independent 16-bit PWM modules and operates up to 32 MHz. A lighting controller can combine PWM outputs with 5-bit or 10-bit analog functions to regulate current, monitor a sensing channel, and apply dimming profiles. The 16-bit timer resolution provides finer control granularity than an 8-bit PWM channel, supporting smoother visible dimming and more accurate drive timing. Its 20-pin PDIP package also simplifies through-hole prototypes, socketed assemblies, and manually serviced industrial lighting modules. Confirm the timer-to-pin assignments and analog multiplexer settings in the manufacturer datasheet before assigning LED drive outputs.
Önerilen
Stepper-Motor Driver Control
PIC16F1579-E/P is appropriate for compact stepper-motor controllers because four independent 16-bit PWM channels can support pulse timing, current shaping, or auxiliary actuator functions. Its 32 MHz execution rate provides useful timing headroom for motion-state logic, limit handling, and step-direction control. The MCU can also use its 10-bit conversion capability for current or position feedback where the board provides suitable sensing circuitry. Compared with a discrete timer arrangement, the integrated PIC16F157X architecture reduces control logic and timing coordination. The 20-pin PDIP package is particularly practical for prototypes and serviceable through-hole controllers. Final design work must verify each PWM channel, analog input, and I/O function against the datasheet pin table.
Önerilen
Digital Power-Supply Controller
PIC16F1579-E/P can serve as the supervisory controller in a small digital power supply because it combines a 32 MHz processor, up to four 16-bit PWM modules, and 5-bit or 10-bit analog conversion features. A control loop can update PWM commands, supervise a measured feedback signal, and coordinate startup behavior while the MCU manages the device's other digital functions. The independent PWM resources are useful when the design needs more than one modulation signal or uses a complementary output arrangement. The MCU's 14 KB Flash memory provides room for control firmware and configuration data. Exact converter topology, loop timing, feedback range, and PWM pin mapping must be validated against the manufacturer datasheet before hardware implementation.
Önerilen
Industrial Automation and Monitoring
PIC16F1579-E/P fits compact industrial monitoring modules that combine digital input handling, analog measurement, and controlled outputs. Its 32 MHz core supports interrupt-driven sampling and logic, while the 5-bit and 10-bit conversion features provide measurement paths for suitable sensor and feedback signals. Four 16-bit PWM resources can control indicators, actuators, or power stages that benefit from precise duty-cycle management. The automotive temperature designation makes the component a sensible starting point for applications with elevated environmental requirements, subject to confirmation of every operating limit. The 20-pin PDIP package simplifies prototype wiring, socket assembly, and field replacement. Designers should provide clean grounding and decoupling and verify all peripheral multiplexing in the manufacturer documentation.
Önerilen
Automotive Auxiliary Control Module
PIC16F1579-E/P is intended for auxiliary automotive electronics because the -E/P ordering code is identified as automotive temperature grade. The device can coordinate switches, lamps, sensors, and actuator commands through a combination of digital I/O, 5-bit and 10-bit conversion, and up to four 16-bit PWM outputs. Its 32 MHz clock supports responsive control logic, while 14 KB Flash and 1 KB RAM provide resources for embedded firmware. The through-hole PDIP package is useful in early prototypes, automotive accessory controllers, and service-oriented assemblies where socketed replacement is valuable. Automotive use still requires review of the exact environmental ratings, transient conditions, EMC needs, and system qualification; a temperature-grade designation alone does not establish complete vehicle-level compliance.
Önerilen
Educational and Rapid Prototyping Platform
PIC16F1579-E/P is useful for embedded-control education because it combines a familiar 8-bit PIC processor with 32 MHz operation, 14 KB Flash, 1 KB RAM, analog conversion, and four high-resolution PWM channels. Students can demonstrate timer-based dimming, motor stepping, feedback control, interrupt handling, and mixed-signal measurement without a complex development ecosystem. The 20-pin PDIP package exposes the device through a generous lead pitch that is practical on perfboards, breadboards, and hand-soldered training boards. Its automotive temperature grade also allows the same controller to be used for elevated-temperature classroom or prototyping experiments within the specified limits. Firmware development should follow Microchip's PIC16F157X programming and peripheral guidance, including correct configuration of the oscillator, pins, and analog functions.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: PIC16F1579-E/P — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | PIC16F1579-I/P |
|---|---|---|
| Package | 20-pin PDIP | 20-pin PDIP - same |
| Brand | Microchip Technology | Microchip Technology |
| CPU Architecture | 8-bit RISC | 8-bit RISC |
| Maximum CPU Frequency | 32 MHz | 32 MHz |
| Program Memory | 14 KB Flash (8K × 14 words) | 14 KB Flash (8K × 14 words) |
| RAM | 1 KB | 1 KB |
| PWM Resolution | 16-bit with up to 4 independent modules | 16-bit with up to 4 independent modules |
| Temperature Grade | Automotive | Industrial |
| Mounting Style | Through-hole | Through-hole |
| Analog Conversion | 5-bit and 10-bit features | 5-bit and 10-bit features |
Ana Farklılayıcılar
- Automotive temperature-grade ordering option (karşılaştırma:PIC16F1579-I/P)
- Same 20-pin PDIP footprint for direct PCB reuse (karşılaştırma:PIC16F1579-I/P)
- Identical core memory and PWM resources (karşılaştırma:PIC16F1579-I/P)
Tasarım Notları
Route the 20-pin PDIP footprint with the notch or pin-1 marker orientation matching the package drawing. Keep the oscillator and analog-capable pins away from high-current switching traces where possible, and use a continuous ground plane to reduce return-path discontinuities. Confirm whether each selected I/O remains available in its analog mode because peripheral multiplexing can change pin behavior.
Place the required supply and bypass capacitors close to their package pins, with the shortest practical ground return. Follow the capacitor type, voltage rating, and placement recommendations in the manufacturer datasheet for the chosen operating mode. If the ADC is used, allow the analog supply and reference path to settle according to the device's specified acquisition and settling requirements.
For PWM-controlled power stages, isolate sensitive analog and timing traces from high-voltage or high-current edges. Account for propagation delay, timer resolution, and output-driver timing when defining minimum pulse widths. Use the 32 MHz clock configuration only after confirming that the selected oscillator source and peripheral divider settings satisfy every timing requirement.
Do not treat PIC16F1579-I/P as an unrestricted replacement for PIC16F1579-E/P. Although the package and core resources match, the ordering codes denote different temperature grades. Validate the complete operating-temperature range, analog limits, and qualification requirements. Also avoid inferring peripheral assignments from the family name; use the exact pin-description and peripheral-multiplexing tables for the selected device.
Uyumluluk Bilgisi
The ordering code is identified as automotive temperature grade, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this exact ordering option.