PIC16F707-E/P - 20MHz 8-Bit Flash MCU | Microchip
MPN: PIC16F707-E/P ✓ AktifPIC16F707-E/P Genel Bakış
A microcontroller is a programmable semiconductor that integrates a processor core, memory, digital I/O, timers, and communication peripherals into one device. The PIC16F707 belongs to Microchip’s PIC16 family of 8-bit RISC microcontrollers and extends that family into the nanoWatt XLP low-power and mTouch capacitive-touch feature set. It sits below higher-end 16- and 32-bit microcontrollers in processing capacity but can provide a compact, cost-effective control platform for embedded products.
The PIC16F707-E/P combines a 20 MHz maximum clock rating with 14 KB of flash memory and 36 I/O ports. Its listed internal-oscillator frequency is 16 MHz, while the device family maximum is specified as 20 MHz. The 32-channel capacitive-touch capability distinguishes it from basic 8-bit MCUs and supports applications such as touch-sensitive controls, appliance interfaces, and embedded human-interface panels. Its stated 2.5 V to 5.5 V supply range allows operation across common embedded supply rails.
The -E/P ordering suffix identifies the exact package and temperature-grade option found in the verified listings: a 40-pin PDIP package with a 0.600-inch, 15.24 mm row pitch. Because this is a through-hole package, it is assembled with a through-hole insertion process rather than SMT reflow. The manufacturer product page describes the PIC16F707 as in production, while the supplied component listing identifies its life-cycle stage as active.
Typical uses include industrial control panels, capacitive-touch user interfaces, appliance controls, embedded monitoring equipment, and compact automotive electronic modules. The large 36-I/O complement is useful when a design needs discrete digital inputs and outputs in addition to touch sensing. Engineers should confirm the exact peripheral mix, RAM capacity, temperature limits, and pin assignments in the manufacturer datasheet before finalizing a new PCB or safety-related automotive design.
The most important design consideration is to verify the complete pinout and peripheral allocation in the 40-pin package rather than assuming compatibility with another PIC16 device. Program the MCU with the appropriate Microchip tooling, provision the decoupling and oscillator components specified by the manufacturer, and validate the touch channels and automotive temperature requirements during prototype testing.
This page consolidates the verified 20 MHz clock, 14 KB flash, 36-I/O, 32-touch-channel, voltage-range, package, and lifecycle information with practical selection guidance. It also distinguishes true package-compatible family alternatives from functional equivalents that would require PCB changes, helping engineers shorten sourcing and design-review time without obscuring unresolved datasheet details.
Drop-in alternatifler için PIC16F707-E/P — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller PIC16F707-E/P (aynı form faktörü ve ayağa oturma) — farklı olan Package, ADC, Internal Oscillator, Low-Power Technology, Capacitive Touch Channels.
PIC16F707-I/P
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →PIC16LF707-E/PT
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →PIC16LF707-I/P
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →PIC16F707-E/P Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | 8-bit RISC flash microcontroller |
| Maximum Clock Speed | 20 MHz |
| Internal Oscillator Frequency | 16 MHz |
| Program Memory Type | Flash, 14 KB |
| Program Memory Organization | 8K × 14 words |
| I/O Port Count | 36 ports |
| Capacitive Touch Channels | 32 channels |
| Supply Voltage Range | 2.5 V to 5.5 V |
| Additional Listed Supply Range | 1.8 V to 5.5 V |
| Package Type | 40-pin PDIP |
| Package Row Pitch | 0.600 in, 15.24 mm |
| Montaj Stili | Through-hole |
| Temperature Grade | Automotive grade |
| Low-Power Technology | nanoWatt XLP |
| Touch Technology | mTouch capacitive-touch technology |
| Life-Cycle Stage | Active |
PIC16F707-E/P 0.600 in, 15.24 mm Pin Yapısı Kılavuzu
PIC16F707-E/P (0.600 in, 15.24 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: PIC16F707-E/P.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
PIC16F707-E/P için uygundur 6 uygulamas: Capacitive-Touch Control Panels, Industrial Appliance Controls, Automotive Accessory Modules, Embedded Monitoring Equipment, Low-Power Sensor Hubs, Educational and Prototype Platforms.
Capacitive-Touch Control Panels
The PIC16F707-E/P suits compact human-interface panels because it combines 32 capacitive-touch channels with 36 I/O ports in a 40-pin PDIP package. According to the Microchip Technology product-page information, the PIC16F707 family supports mTouch capacitive sensing, while the verified records identify the device as a 20 MHz 8-bit flash MCU with 14 KB of program memory. An engineer can assign touch inputs to pads, sliders, or proximity zones while using the digital I/O for indicators, switches, and communication peripherals. The through-hole package also simplifies prototype assembly and repair. Before layout release, confirm the exact touch-channel pin assignments, recommended electrode geometry, and acquisition settings in the manufacturer datasheet, because the supplied excerpts do not provide a complete pinout or touch-network design table.
Önerilen
Industrial Appliance Controls
The PIC16F707-E/P provides enough I/O and flash memory for appliance controllers that coordinate buttons, relays, indicators, sensors, and embedded logic. Its 36 I/O ports reduce the need for external I/O expanders, while the 14 KB flash area supports a control program, calibration data, and firmware revisions. The verified listings identify a 2.5 V to 5.5 V supply option and a 20 MHz maximum clock, making the device appropriate for conventional embedded control boards. For an industrial design, provide local decoupling, protected inputs suitable for the actual noise environment, and a programming path that does not depend on exposed production test pads. Confirm relay or load-interface circuitry separately because no verified load-driving specification is included in the supplied data.
Önerilen
Automotive Accessory Modules
The PIC16F707-E/P can serve as the controller in a compact automotive accessory or body-control module where a 40-pin through-hole MCU, flash program memory, and capacitive sensing are useful. The verified Vyrian listing identifies the part as automotive temperature grade, while the manufacturer describes the family as an in-production nanoWatt XLP device. Its 20 MHz maximum clock is suitable for ordinary control and interface logic, and the listed 36 I/O ports support multiple inputs and outputs. The trade-off is that through-hole packaging occupies more board area than an equivalent surface-mount option. Engineers must confirm exact automotive temperature limits, transient immunity, qualification requirements, and power-rail behavior from Microchip documentation rather than treating the temperature-grade label as complete functional-safety or AEC-Q100 evidence.
Önerilen
Embedded Monitoring Equipment
The PIC16F707-E/P is appropriate for small monitoring and alarm modules that need local control logic, flash-retained configuration, and multiple digital status inputs. Its 8-bit RISC architecture and 20 MHz maximum clock provide a straightforward platform for periodic sensor checks, threshold logic, event logging, and actuator control. The verified 14 KB flash specification allows a meaningful application program to be stored locally, while the 40-pin PDIP format is convenient for through-hole industrial prototypes. Because the supplied records do not confirm the RAM size or communication peripherals, a design should not assume sufficient memory for large buffers or a specific serial interface. Verify those resources, watchdog behavior, oscillator requirements, and brownout settings in the manufacturer datasheet before fixing the system architecture.
Önerilen
Low-Power Sensor Hubs
The nanoWatt XLP designation makes the PIC16F707-E/P relevant to battery-powered or intermittently powered sensor hubs, provided the design uses the MCU’s low-power operating modes correctly. The verified family information identifies XLP technology, and the component provides 36 I/O ports for external sensing and control functions. A typical implementation could wake periodically, scan discrete inputs, update a local indicator, and return to a low-power state. However, the supplied evidence does not include sleep, idle, or active-current values, so battery life cannot be estimated from this page. Select the appropriate LF-series part only if the system rail fits the lower-voltage branch, and use the manufacturer current-consumption tables to calculate average power before choosing capacitors or battery capacity.
Önerilen
Educational and Prototype Platforms
The 40-pin PDIP package makes PIC16F707-E/P convenient for educational platforms, proof-of-concept controllers, and hand-assembled prototypes. The 36 I/O ports give students access to a substantial set of digital signals, while 14 KB of flash and a 20 MHz maximum clock support meaningful firmware examples rather than only minimal blinking programs. The capacitive-touch capability also enables experiments with electrodes, filtering, and human-interface design. For laboratory use, use the exact package drawing and datasheet pin table to avoid confusing the PIC16F707 with pin-compatible-looking devices from other families. Because the supplied excerpts omit the complete pin map and RAM specification, students should treat the official manufacturer data sheet as the reference for register-level examples and memory sizing.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: PIC16F707-E/P — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | PIC16F707-I/P | PIC16LF707-E/P | PIC16LF707-I/P |
|---|---|---|---|---|
| Package | 40-pin PDIP | 40-pin PDIP | 40-pin PDIP | 40-pin PDIP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Speed | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Internal Oscillator Frequency | 16 MHz listed | 16 MHz listed | 16 MHz listed | 16 MHz listed |
| Program Memory | 14 KB Flash, 8K × 14 | 14 KB Flash, 8K × 14 | 14 KB Flash, 8K × 14 | 14 KB Flash, 8K × 14 |
| I/O Port Count | 36 ports | 36 ports | 36 ports | 36 ports |
| Capacitive Touch Channels | 32 channels | 32 channels | 32 channels | 32 channels |
| Supply Voltage Range | 2.5 V to 5.5 V listed | 2.5 V to 5.5 V listed | Up to approximately 3.6 V | Up to approximately 3.6 V |
| Temperature-Grade Suffix | -E, automotive grade listed | -I grade | -E grade | -I grade |
| Low-Power Technology | nanoWatt XLP | nanoWatt XLP | nanoWatt XLP | nanoWatt XLP |
Ana Farklılayıcılar
- Retains the full 20 MHz clock and 14 KB flash architecture (karşılaştırma:PIC16LF707-E/P)
- Uses the documented automotive-temperature-grade -E selection (karşılaştırma:PIC16F707-I/P)
- Combines 32 capacitive-touch channels with 36 I/O ports (karşılaştırma:PIC16LF707-I/P)
- Through-hole 40-pin package simplifies prototype repair (karşılaştırma:Surface-mount PIC16F707 options)
Tasarım Notları
Treat the 40-pin PDIP footprint and its 0.600-inch, 15.24 mm row pitch as the controlling mechanical constraints. Verify every numbered pin against the manufacturer’s 40-pin drawing before drilling holes or assigning peripherals; do not infer compatibility from the PIC16 family name alone. The supplied excerpts do not include the complete pin table, so the PCB schematic-to-layout comparison must be completed against the official datasheet before release.
Validate the exact minimum and maximum operating voltage for the selected PIC16F707 or PIC16LF707 ordering code. The verified F-series listing states 2.5 V to 5.5 V, while the LF-series branch is intended for lower voltages. Do not substitute an LF part into a 5 V rail merely because both use the same package; use the manufacturer’s electrical limits and confirm brownout and oscillator behavior at the system’s supply tolerance.
Place the required bypass capacitor adjacent to the MCU supply pins and route power and ground connections to minimize loop area. For capacitive-touch inputs, follow the manufacturer’s recommended electrode geometry and guard spacing because trace length and nearby copper can alter touch performance. The supplied data does not include the touch-network layout guidance, so obtain that guidance before finalizing the PCB rather than relying on generic capacitive-touch layouts.
Do not confuse the 14 KB flash rating with 14 KB of RAM or treat the 36 I/O figure as proof that every port pin has identical peripheral assignments. The verified snippets omit RAM capacity, complete peripheral allocation, and absolute maximum ratings. Confirm those values in the manufacturer datasheet, and preserve the distinction between the 20 MHz maximum device clock and the separately listed 16 MHz internal-oscillator frequency when configuring timing.
Uyumluluk Bilgisi
The supplied listings identify an automotive temperature grade but do not provide an AEC-Q100 qualification record or formal RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. Those attributes remain unverified rather than inferred.
