PIC24F32KA301-E/SS - 16-bit 32MHz XLP Microcontroller | Microchip
MPN: PIC24F32KA301-E/SS ✓ AktifPIC24F32KA301-E/SS Genel Bakış
A microcontroller is a compact embedded-processing device that combines a CPU core, program memory, data memory, and peripherals on one integrated circuit. The PIC24F32KA301 belongs to the general-purpose 16-bit flash microcontroller family and is positioned within the broader hierarchy of embedded controllers, microcontrollers, and semiconductors. Its XLP architecture emphasizes low current consumption and battery life, while the programmable peripherals support analog measurement, timing, communication, and control functions in embedded systems.
The PIC24F32KA301-E/SS provides a practical balance of processing speed, memory, and analog capability. Its 32 MHz operating speed supports 16 MIPS operation, while 32 KB of flash provides storage for firmware and application code. The 12-bit ADC and CTMU peripheral extend the device beyond basic digital control, enabling sensing and measurement functions in instruments, sensors, and portable products. The 20-pin SSOP package also offers a compact surface-mount format for space-constrained boards.
Deep Sleep support is central to the PIC24F32KA301 use case. The manufacturer highlights DSBOR, DSWDT, and RTCC operation in Deep Sleep mode as features that support low-power performance when the system does not need continuous processing. This makes the device relevant to battery-operated products, portable monitors, sensing nodes, and embedded equipment where standby energy consumption is as important as active processing capability.
Typical applications include low-power sensor nodes, battery-powered medical and industrial instruments, compact control boards, and connected embedded products. The MCU can combine ADC-based measurement with CTMU support and its embedded flash memory, allowing a compact design to handle sensing, control, and local firmware functions. Engineering teams should confirm the required peripherals, pin multiplexing, programming method, and low-power mode behavior against the manufacturer datasheet before finalizing the PCB.
For implementation, begin by reviewing the 20-pin SSOP pin assignment, programming pins, and power-entry requirements in the manufacturer documentation. Keep power and decoupling layout compact, connect programming access according to the recommended programming circuit, and validate wake-up behavior in the intended battery system. This page combines the verified product characteristics, package information, application guidance, and available cross-reference candidates to support faster component selection and board-level planning.
Drop-in alternatifler için PIC24F32KA301-E/SS — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller PIC24F32KA301-E/SS (aynı form faktörü ve ayağa oturma) — farklı olan Package, ADC, Operating Temperature, Mounting Type, Core Architecture.
PIC24F32KA301-I/SS
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →PIC24F32KA301T-I/SS
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →PIC24F32KA301-E/SS Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | 16-bit Flash Microcontroller |
| CPU Architecture | PIC24 16-bit RISC core |
| Maximum Operating Frequency | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Program Memory | 32 KB flash |
| Program Memory Organization | 11K x 24 words |
| Data RAM | 2 KB |
| Data EEPROM | 512 bytes |
| ADC Resolution | 12-bit |
| Analog Peripheral | CTMU |
| Low-Power Technology | XLP / nanoWatt XLP |
| Deep Sleep Features | DSBOR, DSWDT and RTCC operation in Deep Sleep mode |
| Paket | 20-pin SSOP |
| Terminal Pitch | 0.65 mm |
| Montaj Türü | Surface Mount |
| Programming Support | ICSP and low-voltage programming |
PIC24F32KA301-E/SS 20-pin ssop Pin Yapısı Kılavuzu
PIC24F32KA301-E/SS (20-pin ssop paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: PIC24F32KA301-E/SS.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
PIC24F32KA301-E/SS için uygundur 6 uygulamas: Battery-Powered Sensor Node, Portable Medical Monitoring, Industrial Control Module, Portable Instrument Control, Smart Home Sensor, Energy Metering Front End.
Battery-Powered Sensor Node
The PIC24F32KA301-E/SS fits compact battery-powered sensor nodes because its XLP-focused architecture is designed for power-constrained operation. At up to 32 MHz with 16 MIPS throughput, the 16-bit PIC24 core can process measurements and control logic without requiring a larger processor. The 12-bit ADC supports analog sensing, while DSBOR, DSWDT, and RTCC operation in Deep Sleep mode help the design reduce consumption between events. Developers should select the active and sleep duty cycle from the manufacturer current specifications and validate the complete battery budget on the assembled PCB.
Önerilen
Portable Medical Monitoring
The PIC24F32KA301-E/SS is suitable for portable monitoring equipment where a compact 16-bit controller, local memory, and low-power operation are important. Its 12-bit ADC can acquire analog sensor signals, 32 KB of flash stores application firmware, and 2 KB of RAM supports working data and control state. Deep Sleep operation can reduce energy use between measurements or user interactions. For medical equipment, engineers must also verify the applicable operating limits, safety requirements, external front-end design, and electrical isolation requirements rather than treating the MCU alone as a medical certification.
Önerilen
Industrial Control Module
The PIC24F32KA301-E/SS can support compact industrial control and data-acquisition modules that need a 16-bit RISC core without a high-pin-count processor. The device combines 32 MHz operation, a 12-bit ADC, CTMU measurement support, and 32 KB of flash in a 20-pin SSOP package. These resources allow one controller to handle sensor input, threshold logic, actuator supervision, and local diagnostics. Confirm the E-grade operating-temperature range and supply limits against the enclosure environment, and provide suitable transient protection and isolation at field interfaces.
Önerilen
Portable Instrument Control
The PIC24F32KA301-E/SS is appropriate for portable test and measurement instruments that combine digital control with low-level analog observation. Its 12-bit ADC and CTMU support can be used in measurement front ends, while the 16-bit CPU manages calibration, display updates, button input, and instrument control. The 32 KB program memory and 2 KB RAM provide enough architecture for compact control firmware, while Deep Sleep modes can reduce consumption between measurement cycles. Analog accuracy still depends on reference quality, input filtering, calibration, grounding, and careful separation of noisy switching paths.
Önerilen
Smart Home Sensor
The PIC24F32KA301-E/SS works well in compact smart-home sensing nodes where low standby consumption, local measurement, and modest processing requirements are primary. Its XLP design and Deep Sleep support allow the MCU to wake for a sensor reading, process the result, and return to a low-energy state. The 12-bit ADC handles analog inputs, CTMU adds specialized measurement capability, and the small 20-pin SSOP package helps fit compact sensor boards. Low-power Wi-Fi or Bluetooth modules should be controlled carefully so that radio activity does not dominate the calculated battery life.
Önerilen
Energy Metering Front End
The PIC24F32KA301-E/SS can serve as the local control and measurement processor in a compact energy-metering front end. Its 12-bit ADC and CTMU support are useful for acquiring low-level analog signals, while 16 MIPS performance permits simultaneous timing, filtering, and register management. The 32 KB of flash stores measurement and calibration routines, and the 2 KB RAM supports short-term buffering and communication formatting. Use dedicated sensing, isolation, and signal-conditioning components where required, and validate metering accuracy across the complete input range and temperature envelope.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: PIC24F32KA301-E/SS — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | PIC24F32KA301-I/SS | PIC24F32KA301T-I/SS |
|---|---|---|---|
| Package | 20-pin SSOP | 20-pin SSOP | 20-pin SSOP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Architecture | 16-bit PIC24 RISC core | 16-bit PIC24 RISC core | 16-bit PIC24 RISC core |
| Maximum Frequency | 32 MHz | 32 MHz | 32 MHz |
| Instruction Throughput | 16 MIPS | 16 MIPS | 16 MIPS |
| Flash Memory | 32 KB | 32 KB | 32 KB |
| Data RAM | 2 KB | 2 KB | 2 KB |
| Data EEPROM | 512 bytes | 512 bytes | 512 bytes |
| ADC Resolution | 12-bit | 12-bit | 12-bit |
| Ordering Format | E/SS | I/SS | T-I/SS |
Ana Farklılayıcılar
- Maintains the same 20-pin SSOP package family (karşılaştırma:PIC24F32KA301-I/SS)
- Preserves the core PIC24F32KA301 architecture (karşılaştırma:PIC24F32KA301T-I/SS)
- Combines 16-bit processing with integrated analog measurement (karşılaştırma:PIC24F32KA301-I/SS)
Tasarım Notları
Route the PIC24F32KA301-E/SS power pins and decoupling network using the manufacturer recommended layout in the datasheet. Keep the supply and ground connections short, place high-frequency bypass capacitors close to the device, and provide a clean return path for ADC and CTMU signals. Because the package uses a 0.65 mm pitch, inspect the PCB assembly design for solder bridging and confirm that the chosen land pattern matches the 20-pin SSOP dimensions.
Build the battery and standby-power budget from the active, sleep, and Deep Sleep current values in the manufacturer datasheet. Account for the MCU supply current, ADC and CTMU activity, pull networks, external sensors, regulator quiescent current, and leakage through protection components. The verified information identifies XLP and Deep Sleep capabilities, but it does not provide numerical current ratings, so use the device documentation for the final power calculation.
Do not substitute the package drawing from a 28-pin or 44-pin PIC24F32KA member for the 20-pin SSOP version. Confirm pin 1 orientation, power pins, programming pins, ADC channels, CTMU connections, and alternate I/O functions against the exact 20-pin pin-description table. Also verify the operating-temperature grade required by the product before using a different ordering suffix.
Separate analog inputs, CTMU sensing nodes, and reference connections from digital switching and programming traces. Use a quiet ground reference for the measurement section, route sensitive inputs away from high-current loads, and apply filtering appropriate to the sensor bandwidth. If the analog signal source has high source impedance, account for input leakage, sampling charge, and acquisition time in the firmware rather than treating the 12-bit ADC resolution as guaranteed accuracy.
Uyumluluk Bilgisi
The verified product excerpts do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. The -E ordering suffix identifies the product's specified temperature grade, but it does not by itself establish AEC-Q100 qualification.
