PIC24HJ12GP202-E/ML - 16-Bit 40 MIPS MCU | Microchip
MPN: PIC24HJ12GP202-E/ML ✓ AktifPIC24HJ12GP202-E/ML Genel Bakış
A PIC24H microcontroller is a high-performance embedded-control component built around a 16-bit architecture. It belongs to the broader microcontroller hierarchy and combines flash-program memory, RAM, digital and analog peripherals, interrupt handling, and communication interfaces on one integrated circuit. The PIC24HJ12GP202 family is particularly suited to repetitive computations and real-time control while retaining the power-conscious characteristics associated with PIC24 devices.
Three principal capabilities define this device: 40 MIPS execution performance, 12 KB of Flash organized as 4K x 24 words, and 1 KB of data RAM. It also provides 21 I/O pins, 21 interrupt sources, and five trap sources. Its 5-cycle instruction latency supports deterministic control-loop execution, while the 28-QFN package supports compact PCB layouts in applications that require up to 21 externally accessible signals.
The PIC24HJ12GP202 belongs to a family whose devices are described as pin compatible with the dsPIC33F family. This compatibility history is useful when evaluating controller migrations, but software, peripheral configuration, clock requirements, and exact pin assignments must be checked before changing a device type. The PIC24HJ12GP202 uses a 16-bit architecture optimized for high-speed, repetitive computations rather than general-purpose application processing.
Typical applications include industrial motor and process control, factory automation, sensor acquisition, building-control equipment, and compact embedded control modules. The combination of 40 MIPS processing, 21 I/O pins, programmable peripherals, and an extended-temperature rating supports industrial equipment where deterministic control and reliable operation across a wide temperature range are important.
PCB implementation should follow the manufacturer’s 28-QFN pinout and land-pattern guidance. Decoupling capacitors must be placed close to the appropriate supply pins, programming and debug signals should remain accessible during manufacturing, and thermal design should account for the exposed package construction. Review the manufacturer datasheet before finalizing oscillator, reset, programming, and peripheral pin assignments.
This page combines the manufacturer’s device description, the PIC24HJ12GP201/202 datasheet, and exact-package ordering information into a practical sourcing and design reference. It also distinguishes true same-package alternatives from cross-package options so engineers can assess replacement risk before committing a PCB redesign.
Drop-in alternatifler için PIC24HJ12GP202-E/ML — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller PIC24HJ12GP202-E/ML (aynı form faktörü ve ayağa oturma) — farklı olan Package.
PIC24HJ12GP202-I/ML
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →PIC24HJ12GP202-E/PB
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
PIC24HJ12GP202-I/PB
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
PIC24HJ12GP202-E/ML Maksimum Değerlendirmeler & Elektriksel Özellikler
| Architecture | 16-bit |
| Instruction Set | PIC24H high-performance RISC architecture |
| Maximum Instruction Throughput | 40 MIPS |
| Instruction Latency | 5 cycles |
| Flash Program Memory | 12 KB |
| Program Memory Organization | 4K x 24 words |
| Data RAM | 1 KB (1024 bytes) |
| I/O Pin Count | 21 pins |
| Interrupt Sources | 21 |
| Trap Sources | 5 |
| Operating Voltage Range | 3.0 V to 3.5 V |
| İşletim Sıcaklığı Aralığı | -40°C to +125°C |
| Paket | 28-pin QFN, 6 x 6 x 0.9 mm |
| Montaj Türü | Surface mount |
| Packaging | Tube |
| Power Technology | nanoWatt |
| Programmable Memory Type | Flash |
| Device Family | PIC24H |
PIC24HJ12GP202-E/ML 28-pin qfn, 6 x 6 x 0.9 mm Pin Yapısı Kılavuzu
PIC24HJ12GP202-E/ML (28-pin qfn, 6 x 6 x 0.9 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: PIC24HJ12GP202-E/ML.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
PIC24HJ12GP202-E/ML için uygundur 6 uygulamas: Industrial Motor Control, Factory Automation Controllers, Sensor Acquisition Modules, Building Control Equipment, Digital Power Controllers, Embedded Control and Instrumentation.
Industrial Motor Control
The PIC24HJ12GP202-E/ML fits compact industrial motor-control modules because its 40 MIPS execution rate and 5-cycle instruction latency support fast, repetitive control calculations. Its 21 I/O pins provide interfaces for position sensors, limit switches, status indicators, and external control signals, while 12 KB of Flash stores the control algorithm and 1 KB of RAM supports working state. The -40°C to +125°C specification covers demanding factory equipment. Engineers should verify timer, PWM, comparator, fault-response, and isolation requirements in the manufacturer datasheet.
Önerilen
Factory Automation Controllers
The PIC24HJ12GP202-E/ML is appropriate for distributed factory automation nodes that coordinate sensors, actuators, and communication interfaces. A 16-bit CPU operating at 40 MIPS can handle deterministic filtering and state-machine tasks, while 21 I/O pins reduce the need for external logic in compact control boards. The 28-QFN footprint preserves board area, and the -40°C to +125°C range supports equipment installed near heat-producing machinery. Power sequencing, electrical isolation, and communication peripheral selection remain system-level design responsibilities.
Önerilen
Sensor Acquisition Modules
The PIC24HJ12GP202-E/ML can serve as the control and signal-processing core of a multi-sensor acquisition module. Its 40 MIPS throughput supports sampling coordination, filtering, compensation, and data preparation, while the 21 available I/O pins can connect digital sensors and switching inputs. The 12 KB Flash capacity accommodates firmware for calibration and communication routines, and 1 KB RAM provides working memory. Analog front-end design still requires suitable external components and careful attention to grounding and signal conditioning.
Önerilen
Building Control Equipment
The PIC24HJ12GP202-E/ML is suitable for building-control equipment requiring local logic, periodic sensing, and actuator control. Its 16-bit architecture and 40 MIPS performance can execute repeatable control calculations, while 21 I/O pins support digital inputs, outputs, and communication hardware. The 28-QFN package assists space-constrained panel electronics, and the extended temperature specification covers equipment in varied thermal environments. Low-power behavior, brownout handling, watchdog use, and communication reliability should be validated in the final power and firmware design.
Önerilen
Digital Power Controllers
The PIC24HJ12GP202-E/ML can control compact digital power-conversion subsystems where deterministic computation and fast control-loop updates are important. At 40 MIPS with a 5-cycle instruction latency, the MCU can execute compensation calculations, supervise operating states, and coordinate fault handling. The 21 I/O pins support feedback inputs, duty-cycle control, and status signaling. The device is a controller rather than a power stage, so switch selection, current sensing, gate driving, compensation, and safety isolation remain separate design tasks.
Önerilen
Embedded Control and Instrumentation
The PIC24HJ12GP202-E/ML fits compact instrumentation and embedded-control products where a 16-bit processor, 12 KB Flash, 1 KB RAM, and 21 I/O pins provide a balanced resource set. Its 40 MIPS performance supports repetitive measurement processing and menu or configuration logic, while the 28-QFN package supports space-efficient assembly. The extended -40°C to +125°C operating range is useful in industrial test equipment. Interface protection, analog measurement accuracy, calibration storage, and electromagnetic compatibility require application-specific implementation.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: PIC24HJ12GP202-E/ML — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | PIC24HJ12GP202-I/ML | PIC24HJ12GP202-E/PB | PIC24HJ12GP202-I/PB |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-QFN (6x6) | 28-QFN (6x6) | 28-QFN (6x6) | 28-QFN (6x6) |
| Architecture | 16-bit | 16-bit | 16-bit | 16-bit |
| Maximum Performance | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS |
| Flash Program Memory | 12 KB | 12 KB | 12 KB | 12 KB |
| Data RAM | 1 KB | 1 KB | 1 KB | 1 KB |
| I/O Pins | 21 | 21 | 21 | 21 |
| Operating Voltage Range | 3.0 V to 3.5 V | 3.0 V to 3.5 V | 3.0 V to 3.5 V | 3.0 V to 3.5 V |
| Temperature Grade | -40°C to +125°C | Industrial grade | -40°C to +125°C | Industrial grade |
| Order Packaging | Tube | Tube | Tray | Tray |
Ana Farklılayıcılar
- Extended-temperature ordering option (karşılaştırma:PIC24HJ12GP202-I/ML)
- Identical electrical package (karşılaştırma:PIC24HJ12GP202-E/PB)
- Same core resources across package-compatible variants (karşılaştırma:PIC24HJ12GP202-I/PB)
Tasarım Notları
Use the 28-QFN land pattern and exposed-pad connection specified in the Microchip PIC24HJ12GP201/202 datasheet 70282E. Place required decoupling capacitors adjacent to the associated supply pins and keep the exposed thermal pad connected to the ground plane according to the package guidance. Confirm the PCB pad dimensions against the selected assembly process rather than treating the package dimensions as the land-pattern dimensions.
Keep oscillator, programming, reset, and debug routing short and away from noisy switching nodes. Follow the datasheet’s clock and peripheral pin recommendations during schematic assignment; changing a multiplexed function can move a signal to a different pin even when the controller and package remain unchanged. Validate the final pin assignment in the programming project and PCB schematic before fabrication.
Design the 3.0 V to 3.5 V supply rail with enough startup margin, local high-frequency bypassing, and appropriate sequencing for the external circuitry. Check brownout, reset, and operating-current behavior under the intended clock and peripheral configuration in datasheet 70282E. If the same board must accept multiple -E/ML and -I/ML variants, verify temperature-dependent limits rather than assuming only the ordering suffix changes.
Uyumluluk Bilgisi
The device is described as AEC-Q100 qualified in a related -E/SO listing, but package-specific environmental and material-compliance declarations were not explicitly identified for the exact -E/ML ordering code. Confirm all declarations for the exact device before production release.